similar to: IBM x306 - some progress

Hi, This is a little off-topic,but if someone has any info, it could help me a LOT!, I am building an asterisk pbx (1.0.9) on an IBM x306 SCSI machine,my problem is that the BIOS assigns the same IRQ to the SCSI controller, and the TDM400P, i have tried several options of making the bios change the IRQ, but it will always move them together, anyone with some info about my options ? Thanks,

I have an opportunity to pick up a couple of NetFinity 5500's 4 way Xeon 550's w/ 2 gig RAM for very little $$$ I have seen this: http://www.mail-archive.com/asterisk-dev@lists.digium.com/msg00719.html In it, there is a passing remark to the Digium cards having problems with NetFinity's. Can anyone here comment on whether this is still an issue with * 1.0? It'd be a bummer if

Hi, I'd like to monitor the disks connected to a ServeRaid-8k controller in a server running Centos 7 such that I can know when one fails. What's the best way to do that?

> hwilmer wrote: >> >> I'd like to monitor the disks connected to a ServeRaid-8k controller in >> a server running Centos 7 such that I can know when one fails. >> >> What's the best way to do that? > > From a *really* short search, see it has a controller card If you do an > lspci, what does that tell you - is it yet another rebranded LSI card? If

> On 30/10/2018 06:46, Simon Matter wrote: >>> On 10/29/18 1:55 AM, Simon Matter wrote: >>>> To me it seems like, if they are smart, they will try to push IBM >>>> POWER >>>> and RedHat Linux together to establish real competition in the >>>> hardware >>>> market again (and of course don't forget to keep Fedora/CentOS

I hope the CentOS people don't mind me cross-posting for their input. I've just done a clean, text-mode minimal WBEL4 install on an IBM Netfinity 4500, essentially the same hardware as an xSeries 340. The install went fine but now the box will boot, run through the initrd init sequence, perform its switchroot then hang here... SELinux: Initializing. SELinux: Starting in permissive mode

Hi there, I'm in the process of installing Centos 5.2 on an IBM x236 w/ ServeRAID 7k I recently acquired to act as a samba file server. The hardware has all passed various stress tests I could throw at it so we're okay there. My question is. Has anyone had any luck getting the latest IBM ServeRAID Manager v9.0 working in CentOS? If so how? ServeRAID Manager is based off Adaptec's

I need to install CentOS 5.2 on a IBM Server xSeries 226, which comes with a IBM SERVERAID 6i RAID card. I think it is not a true hardware RAID card. I has, nevertheless, an interesting feature: 128MB of cache with battery backup. I launched the CentOS boot DVD and CentOS correctly identified the card and the RAID 5 array as configured by the controller's BIOS. My question now is:

Hi all, we are about to buy some IBM x3550 M2 servers with ServeRAID M5014 SAS onboard controller. Can anyone confirm that these controllers will work with CentOS 5.5 (seems to be some rebranded LSI controller). I cannot find any hint in the 2.6.18-194.3.1.el5 sources... Regards, Peter -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type:

Hello! I just wanted to tell everyone that I have successfully used a TDM400 with an IBM Netfinity 5600 server. I used PCI Slot 3 (the first hot-swap PCI slot). I had a ServeRAID 3L controller in slot 1as well, which managed the server's array. Other than that, there was nothing extra installed. 2x667MHz PIII, 1GB RAM, 4 x 18GB hot-swap SCSI drives. The only problems I had were Ouch

Hi Last week I had a lengthy thread in which someone indicated the my SIL card is a FRAID (don't know if F stands for the F word or Fake, though it doesn't really matter). I want to replace the controller with a controller that Linux will see the RAID1 group as a single HD and not multiple HDs as it happens with the SIL controller. Recommendations anyone? -- TIA Paolo --------------

Hi I have a CentOS 4.2 server with postfix. The problem I'm having is that postfix insists on using $myhostname in the from field even if I instruct it to use $mydomain in /etc/postfix/main.cf or even if I hard code the domain name into $myorigin. What am I missing? BTW: postconf shows output shows that $myorigin is configured to use $mydomain, or the domain name itself ...

Hi I reached the conclusion that my networking problem stems from the fact that I have no peth0 device. I''m trying to locate what creates the device, but until now no success. So I have a simple question: What creates the peth0 device in dom0? TIA Paolo _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com

Apologies if there is a cleanly written and searchable FAQ that I could be directed to. I have no problem to RTFM if I can find the FM... Does Asterisk currently operate under RH9? I have IBM Netfinity 4000R servers that do not support X windows under RH8.x and I prefer not to go back to RH7.3... BTW, where would I find a useful FM? David -- David J. Sussman, MBA email:

Hello everybody, After going through multiple posts on Internet and trying different things I can't seems get zaptel wcfxo loaded on the server correctly. I run dual P3 500 Mhz box. After reading README.udev I put a file 60-zaptel.rules /etc/udev/rules.d # Section for zaptel device KERNEL="zapctl", NAME="zap/ctl" KERNEL="zaptimer",

Hi everyone, I have a dataset(named "Mydata") which includes 4 different variables named; s1,s2,s3,s4 .Each variable(symptom) has 14 patients. I need to use random sampling to make, 5 different samples from my data with 5 patients in each sample. i.e. using all 4 variables I need to make 5 different samples by changing patients(with 5 patients in each sample). X8 X9 X10 X102 X110

We need to replace several servers, quickly - four of our Dell PE 1950's died in one week. (!!!) So, we're looking around, and I was checking out IBM. I customized to what we want, and hit 'continue', and suddenly there's another $800 for a "system common planar" that's "required". Googling only finds specs with it - does anyone know what it is? I mean,

Hi ! Does anyone managed to send multipage faxes (in single TIFF file) with app_txfax from spandsp package (i'm using 0.0.2pre18, libtiff 3.7.1)? If so, I'm interested in format of TIFF file that has been sent sent succesfully (tiffinfo <fax-filename>). I'm having problems with app_txfax, sending first page successfuly 99 % of the time, but never managed to send second or

Hi I have a couple of questions: 1. How do I exist from a domU console back to dom0 console (after issuing xm console [domU])? 2. How do I setup a dom0/domU in order to get a tty login? TIA Paolo _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

I plan to install CentOS 4.3 on some older IBM Netfinity which have Pentium III chips. I see that there is now a i586 pxeboot image for 4.3, I think that's new. Can I use that for Pentium III? Kai