similar to: FW: channel offhook state

My TDM400P w/ 4 FXO cards seems to have trouble with onhook/offhook switching. It dials perfectly, but does not seem to be changing the onhook/offhook state appropriately. It changes sometimes, but it's not really reliable. For example: When I booted the machine, it started as onhook. It remained "onhook" through the entire first call (which was silent on both ends --

I have an Asterisk@Home 1.3 server (Asterisk 1.0.9) and recently added a TDM400P with (1) FXO card on port 4. Inbound calls are always successful but outbound calls fail 75% of the time with intercept messages from my dial tone provider that include "we're sorry, your call did not go through", and "we're sorry, when placing a local call it is now necessary to dial an area

>Asterisk and it works fine untill the following >situation: > >- one of the telco lines occasionally becomes mute after call is completed, would not provide dial tone, (not sure about ringing on that >line) - both via old and new PBX. >- zap show channel <n> would show that line as 'Offhook', though no telephone is off hook. > >If physical line would be

I installed Trixbox and a TDM400P with 2 FXO and 2 FXS ports and am having an annoying issue with the FXO ports. As soon as I plug either one into the phone line it's as though the line is disconnected i.e. get disconnected tone when trying to dial out, line is busy when dialling in. The CLI shows the following: trixbox1*CLI> zap show channel 4 Channel: 4 File Descriptor: 18 Span: 11*

Does anybody know if there are any external telephone-keypads for sale anywhere? (containing the keys 0-9, *, # and onhook/offhook would do) I am looking for a keypad to control a softphone and would prefer the controls to be in the physical world instead of as a window. Sincerely, Markus Hakansson

I've been having trouble with making outbound calls to my TELCO from a TDM400 card (FXS KS signalling) after upgrading from 1.6-beta9 to 1.6.0. The problem is completely intermittent. When it fails, I get this message: [Nov 9 19:12:26] WARNING[18916] app_dial.c: Unable to create channel of type 'DAHDI' (cause 0 - Unknown) At some point, it starts working, but I don't know what

Hi, I have a analog phone connect to a WCTDM card. It used to work fine. Now recently, after several conf change and power restart, it stops working. Whenever I pickup the phone, instead of hearing the dial tone, I hear a busing beeping tone, like a machine gun is firing. :) However, from asterisk console, I do see a a OffHook/OnHook message, but whatever I dial in the phone keypad seems not

Hi, I want to do a scripted 'restart when convenient' on a daily basis. This used to work, but since i've upgraded to Asterisk 11.7 it seems it's never convenient to restart the server. My question: how can i tell *why* it's not convenient to restart the server? It used to be some colleague left the receiver OffHook or something like that, but even when i'm fairly

The FXO lines on my TDM400 are connected to PSTN lines in Israel. As far as I know, the lines around here have disconnect supervision (I've seen some other Israelis on this list, anyone know for sure?), because it's worked on Dialogic cards, which reported hangup, not busy detect (while when I connect a Dialogic card to a PBX, I have to measure the busy signal's frequency/cadence or

Hi all, I would like to make a script/program that would be able to show lots of status information from my analog FXO lines (and FXS lines in the near future). Example of interesting status information: - Hook status: is there a call being made with that zap? - Voltage status: cable connected, voltage values (if possible), line ringing? - RX/TX Volume status I'm using a TDM400 card with

I've installed Grandstream GPX-2000 phones and have successfully enabled one of my buttons to use Asterisk BLF for an extension. I can tell when this extension is available, is being rung, or is on the line. I'd like to do the same for my Zaptel channels, to be able to see when a line is onhook, ringing or offhook. I tried the following but alas, it doesn't seem to be working:

OK... so I'm not sure what I'm looking at. I've had the good old echo problems on my Rev C FXO again this morning, so I thought I'd attempt some debugging, though I'm not sure what I'm looking at. This call has echo. Channel: 2 File Descriptor: 20 Span: 1I> Extension: Dialing: no Context: incoming Caller ID string: "External Call" <99999999> Destroy:

Hi, On Sun Jun 12 09:11:13 CDT 2005, Rich Adamson wrote: > > > exten => s,1,Wait(1) > > exten => s,2,GoTo(s,1) > > > > If I'm on the console when a call comes in, it loops through this bit of > > code a bunch of times. I'm guessing I could lengthen the "Wait(1)" time, > > but is there any other way to do this? > > Sure there is,

Happens quite often. X100P FXO card puts the PSTN line offhook, so that no calls go out or come in. The outside callers get a busy siganl while inside callers cant dial PSTN. Its a DELL optiplex P3 128MB ram 500MHz processor. Here is some more info: (see the zapata.conf in the end) Please direct me where to look for problem. Thanks!!! ======================================== pbx1*CLI> zap

I have a TDM400p with 3 FXS mods and 1 FXO mod. I have all set up with what seems to be correct settings (according to digium and asterisk wiki). As soon as I plug in my POTS line into FXO mod the line goes into offhook state (whether I have power to the card or not). Should this happen? When I try to call * box all I get is busy signal. I've installed stable version, cvs version, change

Hi, We are having a problem with asterisk detecting that an analog ext has been put down. This seems only to happen after a number of calls have been made. We have an FXO port (TDM400P with FXO module) connected to our PBX and are using this to test asterisk prior to rolling our for our small office. What happens is that we make a number of calls to this ext which 1st rings a phone (FXS)

Hello list, I have reason to believe that ADSI can be spoken to phones even when they're onhook. Is this true? Does anyone know? Right now, I'm having trouble figuring out how to do anything to an onhook channel other than ring it. Does this require a magic application and some serious voodoo? Any pointers? I got onto this idea because I noticed that whenever I got voice mail on a

Hi all, I have been looking at the code for both the zaptel driver (wctdm.c/wcfxs.c) and the asterisk channel driver (chan_zap.c) trying to figure out how much of this that has been implemented. So far I can see that the current stable 1.0.9.1 zaptel driver don't have the SETPOLARITY ioctl that would be required to properly signal the Swedish/Dutch CLIP, but the 1.2 beta1 has this

Hi, I'm having an interesting problem with my card. It seems to work fine, for the most part. When I first load the module and asterisk, it detects the line in the on-hook state. However, after the first phone call, zap show channel 1 lists it as being off-hook. During subsequent calls, the card is listed as being on-hook, and when it's not used -- off-hook. There are also some weird

Hello, I would like to boot dos image through PXE linux with menu where the user will have option of booting A: Dos b: Linux Any how to or guide , will help me out any links will also help Regards K.dinesh *********************************************************************** In a World Without Fences Who Needs GATES ? ***********************************************************************