similar to: Connect not signalled (SIP -> Zap)

Hi All, I have been running a environment with asterisk 1.4.20.1 for some time now with no issue but have recently added some extra functionality (enabled call recording via MixMonitor) and ran into some deadlock issues which seem to be well documented with earlier 1.4.x releases so have decided to take the plunge and upgrade. I decided to start testing with 1.6.2 but have run into a couple

Hello, I am wondering if someone has got any ideas that can help solve this problem. I have a dial plan that you call into, and depending on certain conditions it calls out on a number grabbed from a database. Something like this : exten => s,n,Do something exten => s,n,Do something else exten => s,n,Dial(ZAP/g1/${OUTBOUND},${timeout}) I need to log the time the person

Hi, I'm stuck on a silly thing. I need to get the "billsec" CDR value after a call. But I'm finding its always 0. Here's my test code: exten => *244*,1,Dial(Local/test@custom-tests/n,,g) exten => *244*,n,Noop(after dial duration is ${CDR(duration)} billsec is ${CDR(billsec)}) exten => *244*,n,Hangup [custom-tests] exten => test,1,Answer exten =>

Hi, some months ago, I had the problem with an asterisk-1.4.x- Version, that some calls (but not all) were interrupted 64 seconds after connect (a call limit of 86400 seconds was installed using the S()-parameter). It was just a test machine, and later, I switched to callweaver, and the problem had gone. Thus, I never investigated this problem. Now, I upgraded a machine for production use to

Hello, I'm working on some dialplan rules to pull multiple users into a conference call. I have some fairly straightforward rules which start up a new MeetMe conference, allow escape with the * key to invite more users, then use a features.conf sequence to bring the new user into the conference with ChannelRedirect. The problem I'm running into is the time in the MeetMe conference

Hi all, I need 2 CDR Records of below 2 numbers for outgoing calls, detail is given as below: *96XXXXXXXX88XXXXXXXX* *=> Call file : outbound call generate through below file* Test.call ====== Channel: local/s at outgoing/n WaitTime: 45 Context: outgoing_ivrs Extension: s Priority: 1 Set: contact_no=96XXXXXXXX extensions.conf ============ [outgoing] exten => s,1,NoOP(----- First LEG

I am configuring a test Asterisk server (1.8.9.2) to practice setting a single codec globally, to avoid transcoding as much as possible. Since all of my recordings are in gsm format, I am trying to make the SIP clients use gsm everywhere. I am using Ekiga on Fedora 16 x86_64 for my tests. [root at elx2 asterisk]# cat /etc/asterisk/sip_general_additional.conf

Hello, I have problem with interpretation of CDR entries. What happened? ------------- There was: 1. at 09:00:26 we received call from unknown caller (no callerid) to secretary with extension 17 2. secretary answered and after some conversation called to extension 18 to check if she could transfer customer call 3. at 09:02:55 extension 18 answered and call was forwarded 4. call was very long

Hi I have the following topology: Sever A <----> IAX2 <-----> SERVER B <----> SIP <----> ITSP Server A : Branch Server ( with billing cdr ) ?: ?Billing module for auditing calls at branch level Server B : Billing Server? ?( with billing cdr ) ?: Official statements get generating from this server I am trying to match my billsecs on server A TO that of server B The

Can someone tell me what I am doing wrong? Why doesn't CDR(duration) or CDR(billsec) return the correct values? cdr.conf endbeforehexten=yes extensions.conf [macro-Dial] ; ${ARG1} - Dial String exten => s,1,Dial(${ARG1},,M(post-dial)) exten => h,1,NoOp(Call was hung up - ${CDR(duration)} seconds long, billed for ${CDR(billsec)} seconds) The log shows: -- Executing [h

Here is a log from a recent call made out on a ZAP channel from a SIP phone inside my network. For some reason, CDR is billing time even though the "busy tone" was detected. It's also logging the call as ANSWERED. Is this normal behavior? Seems a little odd to me. I have this as the first 3 lines of my zapata.conf [channels] busydetect=1 busycount=3 CVS HEAD updated late

Hello, I have a TDM400P with 2x2 configuration of FXOs and FXSs. I set a test extension of '444' to dial out a specific zap trunk and call a local #. First time I call out to '444' everything works fine. If I hang up the call, and within 10 seconds dial the same number again, I get a fast busy. Seems it isn't letting go of the trunk or something, and I don't have a

Hi, all Sorry that forgot add mail subject last one. I use Ubuntu 12.04.01 TLS and install asterisk 11.7.0 (tar.gz downloaded from asterisk.org). We named it "Asterisk11". I want to generate a call file to /var/spool/asterisk/outgoing. This call will dial out to Local Channel and return to some Extens. Then Asterisk11 will generate a CDR records to MySQL's cdr table(in database

Hi, all Sorry for null subject last mail. I use Ubuntu 12.04.01 TLS and install asterisk 11.7.0 (tar.gz downloaded from asterisk.org). We named it "Asterisk11". I want to generate a call file to /var/spool/asterisk/outgoing. This call will dial out to Local Channel and return to some Extens. Then Asterisk11 will generate a CDR records to MySQL's cdr table(in database

Hi, I am trying to get * log to mssql server. I have odbc and freetds configured, but my insert query is missing calldate which is a NOT NULL field in database schema. cdr_adaptive_odbc: Insert failed on 'sqlserver:cdr'. CDR failed: INSERT INTO cdr (clid,src,dst,dcontext,channel,lastapp,lastdata,duration,billsec,disposition,amaflags,uniqueid) VALUES

Dears, I need to save some information on userfield when calls end in Asterisk13, but I have two error cases: 1. With endbeforehexten=no in cdr.conf, I have a registry in cdr, but userfield is not set. 2. With endbeforehexten=yes, I have two lines in cdr, one with duration, src e dst correct, and a second line with userfield setting and dst h. I am using cdr_odbc.conf, with Asterisk11.14.0 it

Hello list, I'm having troubles implementing the ${CDR(duration)} & ${CDR(billsec)} variables in this scenario: PEER CALLS OUT -> CALL GOES TO PEER'S DEFAULT OUTGOING CONTEXT -> THE CALL IS SENT TO A MACRO AND GOES IN HANGUP -> THE CALL RETURNS TO EXTENSION h OF PEER'S DEFAULT OUTGOING CONTEXT (here I'm trying to print the variable)

Hi I'm having a problem with Asterisk 1.6.2.9 with the MySQL cdr addon. With some calls, the value in the `billsec` field in the CDR is exceeding the value in the `duration` field. I didn't think this was supposed to happen? Our old installation (some ancient version, sorry not available) always had `billsec` <= `duration`. The problem does not seem to be evenly distributed

Hi, all I use Ubuntu 12.04.01 TLS and install asterisk 11.7.0 (tar.gz downloaded from asterisk.org). We named it "Asterisk11". I want to generate a call file to /var/spool/asterisk/outgoing. This call will dial out to Local Channel and return to some Extens. Then Asterisk11 will generate a CDR records to MySQL's cdr table(in database "mydatabase") via cdr_adaptive_odbc.

Hi a new small question ;=) We have two Asterisk, connected in IAX2. On the first, in dialplan, we have: exten => _XX.,1,Set(IAXVAR(ACCOUNTID)=${CDR(accountcode)}) we sent into the IAXVAR "ACCOUNTID" the accountcode. On the second, in dialplan, we have: exten => 18,2,AGI(Caller-ID.agi,${IAXVAR(ACCOUNTID)}) That's work, the second server get the variable. I