similar to: Cisco Callmanager & Asterisk for Voicemail revisited

I have experience problems like this in a different scenario. It is usually due to codec translation problem. What is the default codec set on CCM for the IP Phone and the default set in Asterisk? Make sure the defaults are the same. Try G.711 Michael

On Wed, 23 Jul 2003, Yifang Dai wrote: > I wish! My company just spend a lot $$ on the shinny CCM phone system, so I > don't think I can change that easily... But if I can get asterisk to > talk to CCM via h323, and prove it's usefulness, I might have a chance > to use * in the branches... Well, good luck, then! > By the way, do you know if we can get *'s VM to

Hello, I have Cisco CallManager 3.3.4 and Asterisk@Home latest version. I have earlier tried getting Asterisk to register with CCM via H323 and failed. Back then, I learned that this is a known bug in Asterisk. Also people who tried doing that had also succeeded in getting calls to go through only one direction like from CCM to Asterisk. I am not that expert so excuse my ignorance with this

Hi, Where can I find information on H.323 for Asterisk and/or integration with Cisco CallManager in particular? <http://www.voip-info.org/tiki-index.php?page=Asterisk+Cisco+CallManager+Integration> I have oh323 working on Asterisk. Since the CallManger I am working with is running 3.3.3 I cannot use SIP... Thanks, Adi

Hello everybody, i got and asterisk and a CCM configured thru SIP, and in the sip show peers appear Name/username Host Dyn Nat ACL Mask Port Status CCM 10.60.27.138 255.255.255.255 5060 OK (1 ms) but when i enabled sip debug in the CLI got this ------------------------------------------------------------ Sip read: SIP/2.0 400 Bad

Hi Siggi, > > 7960 and then "Call Ended" on the Display (curious about that !!!). > > That seems to be normal for the 7920. I've sniffed the registration > procedure with Cisco's newest 3.3(3) CallManager (+patches), and it's > doing the same thing. Maybe that's some odd way of testing if the > CallManager ("CCM") really works... >

Hi All, I haven't started sip traces or debug yet, but was wondering what the deal is with the CCM and reinvite, why it doesn't work with Asterisk (using 1.2.9.1). I can make calls back and forth all day with canreinvite=no, when I try to reinvite an inbound sip call from the CCM with Asterisk server 1 to Asterisk Server 2, I get one-way audio issues. All the RTP ports are configured

Hi! I'm trying to communicate a Cisco CCM 4.0 with Asterisk 1.2.11, I 've followed the info in http://www.voip-info.org/tiki-index.php?page=Asterisk+Cisco+CallManager+Integration but still not able to make Asterisk communicate with Cisco. I keep on receiving --- SIP/2.0 400 Bad Request - 'Malformed/Missing URL' --- and --- SIP/2.0 404 Not Found --- messages

Has anyone had any luck getting a SIP trunk up and working between Callmanager and Asterisk? If so were there any steps you had to take that were not in the documentation on wiki? Blake

Anyone have the 7970 xml config for sip yet? Aaron

Running Cisco Call Manager 6.1 and Asterisk 1.4. CCM is connected to a T1, Asterisk is running strictly VoIP over the network and using CCM as the trunk. Calls from the SIP phones connected to Asterisk work fine. They can call both external numbers and any Cisco extensions attached to CCM. Calls from CCM to Asterisk fail without any notification in Asterisk (and I DID have this working at one

Please forgive me my ignorance ... I've spent two days trying to find out something about the format of the default configuration file, which CCM produces. The only example I have so far is the one from the chan_sccp source. There were tons of references on entering the callmanager commands on a cisco command line - which I don't have (don't need thanks to chan_skinny + chan_sccp).

Has anybody successfully (or I guess unsuccessfully for that matter) implemented Cisco Call Manager and used an * box for voicemail? I checked the wiki and google and I see some references to Call Manager Express and *, but CME is completely different than CM. If anybody has done this or has any insight, it would be appeciated. We are trying to migrate ~ 300 users off of Cisco Unity and

I would like to setup Asterisk for voicemail with CallManager 3.3(5). I would like to know what would be the best Distro of Linux to use and version, what version of Asterisk works best to interact with CallManager, and what H323 ChannelType works. As you probably read in another thread I tried FC5 with Asterisk 1.4 and OOH323 (included with the addons package). This doesn't seem to work to

Does anyone have a good resource to learn how to program the soft and hard buttons on a Cisco 7940 or 7960 phone? Using SIP Firmware...thanks. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060303/e5e63834/attachment.htm

Hi, i'm searching and trying, but can't get it working. I'm trying to send calls from Cisco Callmanager to Asterisk with oh323 channel driver. Therefor the asterisk is defined as a H323 Gateway in the Cisco Callmanager. The Call comes from CCM to Asterisk and it works but i didn't get the called number. This is needed because i want to make Voicemailboxes. If i connect via

Hi, I have the following config: [7960] <--skinny--> [Cisco CCM] <--SIP_trunk--> [asterisk] <--SIP--> [X-lite] Is there a chance to avoid the RTP stream from passing through the Cisco CCM ? I would like to have all RTP handled by the *. This is just a testbed, for a larger project. What I want to achieve, is actually this: [Cisco Phone] <--skinny--> [Cisco CCM]

Hello all, A client of us, is thinking to migrate their actual PBX to a Cisco CallManager. We want to sell him an asterisk box to complement the Cisco PBX. I think to use asterisk as a Voicemail server (Replazing the Cisco Unity) Has asterisk all the functionalities to replace a CIsco Unity server? Which functionalities Cisco Unity has than asterisk could cover? How could asterisk complement the

Hi, I've got a CCM ( Cisco Call Manager ), with a Cisco Unity VM server and about 45 SCCP phones on the ccm, and 200 users on unity. we want to migrate all users to IP Phones to ditch our ancient phone system. I would love to get Linksys-Sipura SPA-941s for the 150 users not on IP phones yet and run sip to an asterisk server, but have their voicemail on Unity. these phones are $150 each,

It can be done. 1. Setup a new Vm profile on CCM with a mask of XXXX 2. Setup a CTI route point: a. Set the directory number to a pattern. I use *27XX but any pattern that you can send from * is good, ie. 88XXX b. Set the VM profile to the newly created profile c. Set the line to forward all calls to VM 3. Change the dialplan in * to append the extension called to the