similar to: Comfort Noise Generation with Zap-IAX

I've just installed asterisk on a Debian Linux (apt-get it) And i have placed two sip phones in sip.conf and i'm testing parking with them I have phone1-SIP/1000 and phone2-SIP/1007 The following happens if i park from calling party and everything is OK 1. Pickup Phone2 and call to Phone1 2. Talk 3. Phone2 dials #700 and parks the call (it is placed in 701) 4. Phone2 is hangup 5. Pickup

Hi! I want to tell asterisk to simply pass-through any codecs that my phones support. I have to use codecs that are not popular and implemented by a third-party, asterisk has nothing to do with them. I've made a test with g722 (that asterisk doesn't support), i've set all my two snom 300 phones to support only g722 and asterisk declined the sip invitation. That is bad for me. Is it

Hi, I installed Asterisk an all works fine exept for Grandstream. When I call with a softphone (ex X-ten) to a Grandstream (BudgetTone-100), I can make a conversation. = ok When I call to a softphone with a Grandstream I can pich up the call with the softphone but the Grandstream keeps ringing like on the other site you didn't pick up the phone.(even if you do so) It's the same when I

Hi! Maybe you can help me. I want to tell asterisk to simply pass-through any codecs that my phones support. I have to use codecs that are not popular and implemented by a third-party, asterisk has nothing to do with them. I've made a test with g722, i've set all my two snom 300 phones to support only g722 and asterisk declined the sip invitation. That is bad for me. Is it possible that

Dear, When I start asterisk -vvvvvvgrc and I ask 'sip show peers', I don't get the ip adress in the 'Host" field. Name = phone1 and phone2 Host=unspecified mask 255.255.255.255 port = 0 status = unmonitored I can ping the two phone's and get a reply (also from the laptop) phone ip adres 192.168.10.12 and 192.168.10.13 (server 192.168.10.11and laptop 192.168.10.14)

I'm setting up a queue for two independent operator phones that are capable of answering multiple calls at once. It's currently working with the following settings and Asterisk 1.4: queues.conf: [telefonistas] strategy=roundrobin ;strategy=leastrecent music=default timeout=60 retry=0 maxlen=0 wrapuptime=0 ringinuse=yes autofill=yes joinempty=yes member => SIP/8899 member =>

Dear all, I've been taking my baby-steps toward setting up an Asterisk phone system in my office, as also between my home and office (connected by DSL). I'm have a rough time getting two * boxes talk IAX over a LAN. I don't know what I am doing wrong, but am attaching my iax.conf and extensions.conf on both the boxes. Does anyone see it? ------config files start------ site-0

I don't know if this is possible, and I can't quite get my head around how to do it... If I am using DUNDi for redundancy in a cluster, when Phone1 makes a call to Phone2, both Asterisk A and B will be in the RTP stream: +---+ +---+ | A |-----| B | /+---+ +---+\ / \ Phone1 Phone2 Is there a way configure re-invites

Hi, I've have followed through the help docs in trying to get an initial setup going with two phones and the asterisk server. Firstly, all I'm trying to do is get the two phones actually talking to one another VIA asterisk.. I've added this to sip.conf: [phone1] type=friend host=dynamic defaultip=192.168.1.106 ;username=blah ;secret=blah dtmfmode=rfc2833 ; Choices are inband,

I am new to asterisk and need to dig up some info on how to set it all up. It looks a bit daunting especially all the options available in the .conf files. I have 2 SIP phones, GXP2000 and a budgettone 100. phone1 - 192.168.0.160/24 extension 1000 phone2 - 192.168.0.161/24 extension 1001 Server - 192.168.0.57 I get the following all the time, but can make calls between the 2 extensions,

Hello there, I appreciate any help about this problem that I can't figure out... I need to record all my calls: this is pretty easy using Monitor() before the Dial(). eg: exten => 425,n,Monitor(wav49,/var/spool/asterisk/monitor/425/${EPOCH}_${CALLERID(num)}_in,mb) exten => 425,n,Dial(${PHONE1},10) Now, I want to create a call group: I mean, I want a number (eg 800) that makes

Retrying, falling of the list some how :-( -------- Original Message -------- Subject: feeling n00b again Date: 2018-08-20 09:51 From: asterisk at a-domani.nl To: asterisk-users at lists.digium.com Hi all, Long time ago, I followed a Asterisk training, and both at work and at home, was able to deploy Asterisk, make all sorts of internal call (hard/soft voip-phones, incoming/outgoing,

I have the following asterisk configuration (sip.conf) : [General] externip=82.79.81.3 localnet=192.168.10.0 localmask=255.255.255.0 [Phone1] type=friend host=dynamic nat=yes qualify=yes context=sip callerid="Phone1" <1> disallow=all allow=gsm [Phone2] type=friend host=dynamic qualify=yes context=sip callerid="Phone2" <2> disallow=all allow=gsm [Phone3]

Hello I have one phone (phone1) in one network, the other (phone2) in public network. both can call the other side; phone1 can be heard by phone2, phone2 can't be heard. I don't have NAT set on both end, but I use rtpproxy on SER. Is NAT still necessary to be set on both phones? Thank you! steven

Hi all I have registered my phone1 in asterisk server 192.168.0.9 and phone2 in asterisk server 192.168.0.6. Both are sip phones. i configured the extensions.conf file in both the server. the extensions.conf file on server 192.168.0.9 is exten=>301,1,Dial(SIP/301@192.168.0.6,20,tr) exten=>401,1,Dial(SIP/phone1,20,tr) 301 is the extension number for phone 2 in asterisk server

I have a TDM4xx card with two (3 and 4) interfaces for my land lines. I have a basic setup working with them and one VoIP provider. Questions: 1. How do I determine which Zap line the incoming call is on so I can handle it differently? One line is my home phone and the other is my work line. I would like different dialplans for each. 2. When I have my work line set (via Verizon) to call

Hi Folks, Just wondering if anyone can give me some pointers, I'm configuring Asterisk to talk to FWD's new IAX service. The asterisk server is behind an iptables NAT Firewall, with port 5036 forwarded: $IPTABLES -t nat -A PREROUTING -p udp -d $EXTERNAL_IP --dport 5036 -j DNAT --to-destination 172.16.20.200:5036 I can make outgoing calls just fine, but when I receive an inbound call

Hi all, I am using to Xlite to save video voice mail. when i retreive it, then only video show , no voice is here out. Plz tell me where ,i am wrong , and how i can able to see video plus here audio in voice mail box. I did following configuration In Sip.conf videosupport=yes [phone1] type=friend host=dynamic context= employees mailbox=101 at default

I am thinking that I have found a bug in Rails migrations. My app is using UUIDtools to generate guids for primary keys. To do this I pass :id=>false and then create my own id column as shown below. Next I leverage "execute" to create an index. It seems to work fine. The table in MySql is perfect. However the ID column and primary key on the ID column are not in the schema.rb file I

Hi! I am having trouble getting the following configuration to work: PHONE1 <-- rtp --> Asterisk <--IAX--> Asterisk_SRTP_1 <--- srtp ---> Asterisk_SRTP_2 <-- rtp--> PHONE2 This means, I am using regular voip clients without srtp support on both sides, but the communication between the 2 Asterisk_SRTP boxes must be secure. The Asterisk_SRTP_2 box is registered in the