Displaying 20 results from an estimated 2000 matches similar to: "AW: Debian Sarge, Kernel 2.6.13 and AVM Fritz!PCI v2.0 card"
2005 Oct 10
2
AVM Fritz! + chan_capi + mISDN + PTP
Hello everyone,
I have been using an AVM Fritz! card with chan_capi and mISDN for
quite a while in PTM mode and it was working finely.
Now, I needed more DID/MSN, so I switched to PTP. But now nothing
works anymore :(
I am using Asterisk on Debian Sarge stable and installed Asterisk
along with chan_capi from apt-get. I installed mISDN from the CVS of
isdn4linux.de.
It is :
- Asterisk
2003 May 01
0
AVM Fritz-PCI v2.0 and Asterisk
Hello all,
I would like to know about the support for this ISDN passive card AVM Fritz-PCI
v2.0 with Asterisk:
1. which drive should I use with Asterisk: isdn4linux or capi4linux from
AVM
(I read some messages on the asterisk-users archives but I didn't find
the answer)
2. if the drive is isdn4linux then HiSAX support (for passive cards) is
enough ?
and the device /dev/ttyI0 (for
2004 Dec 21
1
two avm usb isdn fritz v2.0 cards
I have a problem trying to install two avm fritz cards on one asterisk
machine. I am using fcusb2 driver. 1 card works perfectly.
I tried to recompile driver like it is described on this page but with
no success.
http://www.quiss.org/caiviar/Two-Fritzcards-HOWTO
I think the problem is that i can not find this part of code.
dev = pci_find_device (AVM_VENDOR_ID, AVM_DEVICE_ID, dev);
if
2007 Mar 07
1
capi installation problem
Hello,
I have problem with capi, I can't install it. I have putted all info what I
did and what I get :). I think you can suggest me how to solve this
problem.and thanking you in anticipation. I have ISDN Frtiz!Card PCI
v2.1and I want to install it to my ubuntu box (kernel:
2.6.17-10-server). Using command "lspci -vv" , I can see that kernel finds
this card:
*02:0d.0 Network
2003 May 14
2
AVM Fritz/Capi without suse ?
Hi All,
Has anyone had success with using the AVM Fritz PCI ISDN Card (v2) CAPI
drivers with a distro other than suse? The AVM driver is geared towards
suse, and after trying them with RedHat 9 I've not got very far. The
module compiles but dies when I attempt to modprobe it.
I've googled until I almost lost the will to live! What little
information
I can find seems to refer back to
2010 Apr 11
2
mISDN installation via yum
HI,
I tried to install asterisk and mISDN via
http://www.asterisk.org/downloads/yum
My machine is running with kernel-2.6.18-164.15.1.el5.i686
# grep kernel /var/log/yum.log
Mar 21 16:09:28 Installed: kernel-2.6.18-164.15.1.el5.i686
Mar 21 16:09:42 Installed: kernel-devel-2.6.18-164.15.1.el5.i686
I've installed the following packages:
# yum install asterisk16-misdn mISDN mISDNuser
2004 Sep 21
1
HELP on AVM Fritz with CAPI drivers for SMP RH 9
Hello,
I have been wrestling with installing the CAPI drivers for AVM Fritz in order
to use chan_capi with Asterisk.
I use an SMP machine, RH 9. I have found rpm's for CAPI and AVM drivers
(namely: capi4k-utils-2003.06.16-08.mungo.RH9.i686.rpm and kernel-2.4.20-8-
avmfcpci-03.11.02-08.mungo.RH9.i686.rpm), but I believe that they support only
single processor machines.
I've already
2005 Oct 20
0
German ISDN&DSL Card "AVM Fritz!Card DSL"
Hello everyone!
Has anyone had success in configuring the "Fritz!Card DSL" card, a
combination of an ISDN adapter and a DSL modem from the german AVM GmbH
(http://www.avm.de/) in a dom0 Domain (Xen 2.0.7)?
I had success in compiling the modules from
http://www.avm.de/de/Download/index.php3 and they load fine with
"modprobe fcdsl". But with the Xen dom0 Kernel they seem to
2003 Aug 11
1
avm fritz pci
hello,
does anybody know how to setup avm fritz pci card in p2p mode ?
regards marian
--
SUNTEQ s. r. o.
Hviezdoslavova 9 # Prievidza # 971 04 # Slovak republic
Tel: +421-46-5430 754 # Fax: +421-46-5439 144
http://www.sunteq.sk/
------------------------------------------------------------
A mind is like a parachute... it only works when it's open.
2004 Sep 03
2
Using AVM Fritz!PCI as zap interface
Hello!
Is there a way to use AVM Fritz!PCI as a ZAP interface and have it
configured for ZAP channels?
Thanx in advance!
Roland Zagler
mailto:r.zagler@fog.at
@fog smart partners
2004 Jan 21
1
ISDN p2p AVM Fritz Card
hello!
I'd like to use my asterisk-box on a p2p-line from my alcatel pbx.
isdn4linux and capi works fine on a s0-line from the pbx, but i need
more then 8 msns, cause i'd like to implement a voice-mail system and an
extension to our "old" pbx with voip-phones.
had anyone success using isdn4linux on a t0 (p2p) line (of course with
an inexpensive passive card like my avm
2003 May 27
1
Kernel Version for CAPI AVM Fritz PCI V2 / chan_capi / chan_alsa update to latest version..
Hello there
I have a serious issue with the AVM Fritz PCI V2
I have the following setup and the problem is, that the kernel freezes hard after
about 16 hours. The second problem is, that the S-Bus gets jammed as well, so
you can't even use a analog phone! on the NT
Kernel 2.4.21rc2 with ACPI Patch and of course capi
are there any reasons why this configuration should not work?
And the
2005 Jul 20
1
Fedora Core 3 + AVM Fritz ?
Someone have info about install an AVM fritz into FC3 ?
I'm getting problems with kernelcapi, after succesfully installed the
fcpci support.
Thanks
--
Adri? Vidal
adriavidal@gmail.com
Mail is better with 1Gmail
2003 May 27
0
Kernel Version for CAPI AVM Fritz PCI V2 /chan_capi /chan_alsa update to latest version
Hello there
I have a serious issue with the AVM Fritz PCI V2
I have the following setup and the problem is, that the kernel freezes hard after
about 16 hours. The second problem is, that the S-Bus gets jammed as well, so
you can't even use a analog phone! on the NT
Kernel 2.4.21rc2 with ACPI Patch and of course capi
are there any reasons why this configuration should not work?
And the
2003 Dec 15
1
AVM ISDN Fritz!Card USB works
Is case anyone wants to know... The Fritz! USB ISDN box works fine with
Asterisk!
I'm running CAPI 0.3.0 and love it, because the mini ITX server I have
only takes one PCI slot which is now filled with a 4 port Digium card.
2004 May 06
0
AVM Fritz doesn't pick up call or make calls
Hi,
I have an AVM Fritz! ISDN card connected to an NT1 unit (Australian).
I have no problems getting the drivers up and running but when using it with
asterisk nothing happens.
I call in using a mobile or analogue phone on either of the numbers and the
NT1 activity light either flashes or goes solid while ringing but it pauses
for a while and on a mobile i get call not answered and a busy
2004 Jun 08
0
Echo problems using AVM Fritz!PCI Card
Hi All,
I'm running the latest asterisk CVS code (from experimental), and
hardware-wise an AVM Fritz!PCI Card, together with chan_capi 0.3.3.
The problem is that any inbound/outbound calls result in echo on MY end
(the asterisk end). I've played with the echo settings in capi.conf
(mainly turning on echocancel and echosquelch, also tried playing with
rxgain/txgain) to no avail. The only
2005 Jul 27
0
echo capi AVM fritz card
Hi All,
I'm running asterisk 1.0.7 on debian sarge, and
hardware-wise an AVM Fritz!PCI Card, together with chan_capi 0.3.5.
The problem is that any inbound/outbound calls on analogue line result in echo on MY end
(the asterisk end). I've played with the echo settings in capi.conf
(mainly turning on echocancel and echosquelch, also tried playing with
rxgain/txgain) to no avail. The only
2005 Sep 30
0
It is possible to have 2 AVM Fritz! USB for multiple BRI access?
Hello Asterisk users,
I would like to use 2 BRI lines on my * box but I haven't any PCI slot.
Is it to possible to use 2 two AVM Fritz! USB.
If not, what other solution can I use?
Thanks
Amaury
2003 Jul 17
4
AVM Fritz! to connect LAN with ISDN line?
Hello,
Is it possible to use * as a gateway in the following setup:
LAN (with Windows NT/Linux PCs)
|
Ethernet (IP)
|
Linux PC with * and AVM Fritz! ISDN Adapter
|
ISDN
|
Someone with a analog/digital phone (POTS)
Basically, people sitting on their PCs will wear a headset, and whenever
they want to call someone,