similar to: Ztmonitor values when zap channel is onhook

Good day list, I am feeling extra stupid this Monday morning and am hoping someone can come to the rescue. I am trying to use the ztmonitor utility on my wildfire 4 FXO card. and have read the following from the wiki. *********Wiki start******** If you set this to yes, use ztmonitor to adjust the rxgain and txgain. Ztmonitor isn't installed by default; but it is included with the Zaptel

Hardware is an SM56 card (X100P clone). When the line hangs up, ztmonitor displays full bar (or whatever maximum allowed by rxgain) in RX. It only drops zero when the line picks up (and remote was silent). Is this something of concern? The zap channel seems to work despite echo. Additionally, what's the objective of tuning with ztmonitor? I mean, what would indicate an optimal level?

Details: Asterisk 1.0.9 Zaptel 1.0 Dell P3 1ghz with X100P Clone Location: India This is an interesting issue where when I open up ZTMonitor, it shows the RX as being on. It seems that Zaptel doesn't know to hang up the line so after a couple of hours when the telecom cuts the line, everythign stops working. Things I've tried include playing with the zaptel.conf, trying zaptel v1.2(with

Hi, the new Grandstream release for the ATAs allows the setting of the FXS impedence, the Onhook Voltage and the Polarity Reversal. Anyone know how these should be set in Germany? -- Best regards Peer Oliver Schmidt

Err, stupid me. Seems like the phone is hungup, but when I start ztmonitor, the line is picked up. I guess the line in India is pretty loud b/c the RX bounces off the charts, changed it to (-4) and all my problems are solved. Regards, Min Chang On 4/14/06, Kyle Sexton <ks@mocker.org> wrote: > > Have you tried putting a Hangup in your extensions.conf? > > > > On 4/13/06,

The value of 14800 is correct. I had issues with my TDM400p with 2x FXO's installed and using the Xlite client. I could not get the echo stable at the initial call. Changing to a hard phone made everything work correctly. I still had problems with the off location I called, but mostly worked great. To see the TX gain I created an extension with the Milliwatt command attached to it and called

I bought an Aastra PT480 from digium, but I wanted to see if I could get some more help with this before Monday. Any help would be appreciated. I have the phone connected to the TDM400P card, and I also have the T100P and the X100P in the same box. My problem is, it appears as if the phone and asterisk can't understand each other. The port the phone is connected to always remains

Hi, Lately we've noticed that some Zap channels on one of our PRIs are unavailable. We have 2 PRI lines with 60 channels in total. On the first PRI there are currently 20 channels that are not being used for some reason. I tried googling around and found some similar problems but there really was no solution (?). I'm not sure if this problem has occured now because of more load on the

My TDM400P w/ 4 FXO cards seems to have trouble with onhook/offhook switching. It dials perfectly, but does not seem to be changing the onhook/offhook state appropriately. It changes sometimes, but it's not really reliable. For example: When I booted the machine, it started as onhook. It remained "onhook" through the entire first call (which was silent on both ends --

I have an Asterisk@Home 1.3 server (Asterisk 1.0.9) and recently added a TDM400P with (1) FXO card on port 4. Inbound calls are always successful but outbound calls fail 75% of the time with intercept messages from my dial tone provider that include "we're sorry, your call did not go through", and "we're sorry, when placing a local call it is now necessary to dial an area

Hi all; I am sure this question has been brought up before, but I could not find any information in the FAQ or docs etc. Quick question; Is there a way of syncing multiple servers simultaneously from 1 source server? Thanks, -- Vaibhav Goel extension 6347

I have echocancel=yes in zapata.conf but when I do a zap show channel 1, I notice echo cancellation is turned off. I followed the article that talks about the order in which the statements need to be in zapata.conf to get echo canceling to work: http://lists.digium.com/pipermail/asterisk-users/2005-June/110615.html But it is still not working. Does anyone know how to get echo

Is anyone else having an issue with GXP-2000s and transmit gain? All my other phones are fine on my TDM400P with txgain set at 0, but the GXP-2000 caps at about a third of the scale in ztmonitor. I'm getting people complaining they can't hear me on my GXP-2000s, whereas my Snom 320 and Polycom 301 are great, and my Budgetones are overmodulating. Is there any conceivable fix on the

Hi, I'm having an interesting problem with my card. It seems to work fine, for the most part. When I first load the module and asterisk, it detects the line in the on-hook state. However, after the first phone call, zap show channel 1 lists it as being off-hook. During subsequent calls, the card is listed as being on-hook, and when it's not used -- off-hook. There are also some weird

I new in asterisk world so, please, forgive me if I say something stupid. At least, and after a lot of tryes, the isdn card seems to be registered: [chan_zap.so] => (Zapata Telephony w/PRI) == Parsing '/etc/asterisk/zapata.conf': Found -- Registered channel 1, PRI Signalling signalling -- Registered channel 2, PRI Signalling signalling -- Automatically generated pseudo

Hi all, Is there any way through which i can run a R file from Command line. For example > r mean.R Thanks and Regards, Vaibhav Gathibandhe [[alternative HTML version deleted]]

Hi All, Channels 25-28 on a customers PBX are regular Zaptel FXO cards that are hooked into 4 incomming phone lines. They are all in a group to do automatic rollover for outgoing calls (if channel 25 is being used, dial on channel 26, etc.). Sometimes when a user is dialing a number, instead of bridging to one of the FXO cards it goes and rings to Zap/1-1. This doesnt occur all the time but some

Hello! I'm having an echo problem with a TDM card. The TDM card is being fed by a channel bank just 12 or so feet away. When you put an analog handset on the line, both the RX and TX volume seem to be just fine. However, when I use the TDM card, I have to have an rxgain of 13.5, and even then, the audio is relatively quiet. I'm also getting echo on these lines, so I have turned

To start ztmonitor in quantitative mode you do the following. Assuming you are running Asterisk V1.0.9 you need to edit one line to ztmonitor.c in /usr/src/zaptel as per patch 2783 http://bugs.digium.com/bug_view_page.php?bug_id=0002783 Change line 261 fprintf(stderr, "Usage: ztmonitor <channel num> [-v] [-f FILE]\n"); to fprintf(stderr, "Usage: ztmonitor <channel

On Fri, May 4, 2012 at 6:50 PM, vaibhav srivastava <vaibhavcse30 at gmail.com>wrote: > > Hi all, > Since I want to run Samba without modifying my existing kernel. Please > tell me what are the requirements for the same. > What are the package list required in kernel before installing samba. > thanks in advance. > -- > Thanks and Regards, > Vaibhav Srivastava >