similar to: asterisk sipura and g726 codec

Hello list, Grandstream GXP2010 phone calling to Snom 320, Asterisk in the middle. Grandstream allows for 8 different codec specifications. I have defined them as 4 x G726 & 4 x alaw. Snom allow for 7 different codec specifications. I have defined them as 3 x G726 & 4 x G729. The SIP peers are both defined as : disallow=all allow=g726 allow=alaw allow=g729 allow=gsm This is the

Hi, I've one Sipura SPA2000 at home behind a linuxbox with two network adapters (eth0 for WAN and eth1 for LAN) doing NAT/DHCP: ___________ HOME _______________ ____OFFICE ____ SPA2000 <---> Linux Box <--> Asterisk Box 192.168.0.253 192.168.0.1 eth1 200.93.xxx.a 200.93.xxx.b eth0 My problem is when I try to call to any trunk or extention

Hi, I am running FC1 with latest patches of 3/30/04, and I have the latest CVS as of this morning 3/30/04 of asterisk, zap and libpri. The SIP device I am using is a Sipura SPA-2000 with G726-32 "Forced". When I 'make clean" and recompiled zaptel, libpri, asterisk and start asterisk I can see: [format_g726.so] [format_g726.so] => (Raw G.726 (16/24/32/40kbps) data) ==

To me it's a error if I can't complete calls using the ATA configured to use the g726 codec. I just tried it usign a sipura SPA-2000 (preferred codec: G726-32) and I received NOTICES and WARNINGS, but I can't complete a call. On a zap channel: -- Executing Dial("SIP/2007-e4d8", "Zap/1/2217008") in new stack -- Called 1/2217008 -- Zap/1-1 answered

I have a ATA 186 with SIP firmware 3.1 when I changed the configurations to use the g.726 codec I received many erros and the calls doesn't work. I changed the fields: - LBRCodec: 6 <- the code for g.726 - TXCodec: 6 - RxCodec: 6 The errors: Jul 9 13:15:37 NOTICE[1192491824]: rtp.c:500 ast_rtp_read: Unable to calculate samples for format G726 Jul 9 13:15:37 NOTICE[1192491824]:

Hi All, I am happy to offer $1000USD for the fix of the g726-32 in Asterisk. What's wrong with it? It currently gives a very distorted sound as though the gain is set to high. Lowering the gain on endpoints helps but this is not a fix just a poor workaround. We require g726-32 to be of the same quality as the Asterisk g711 implementation. As the developer who fixes this issue you will

I am able to use sox to convert audio files from ulaw to wav (MS ADPCM), is there a way, using sox or another command line tool, to convert them to g726 ? ( g726-32 since it is supported by * ) tia, -baji. --

I'm having a horrible experience getting a Cisco ATA-186 to work with *. I can make calls from the ATA with no problems. However, incoming calls make the ATA ring once, and then the call is disconnected. I have no problems with my Sipura 2000 or my Grandstream phones. I am running 2.16.1 sip code on the ATA 186. Neither * nor the ATA is behind a NAT. They are both on public IP addresses

Hi Users, I was wondering if someone of you have the same thing on CentOS 64x? asterisk01*CLI> core show translation Translation times between formats (in microseconds) for one second of data Source Format (Rows) Destination Format (Columns) g723 gsm ulaw alaw g726aal2 adpcm slin lpc10 g729 speex ilbc g726 g722 siren7 siren14 slin16 g723

Hello, I'm wondering if anyone has benn able to successfully get g726-16 passthrouhg to work? I am wanting to use this codec instead of g729 as I'm running out of DSPs using a high complexity codec on the Ciscos. I would think it would work just as g729 does, which has been working fine for me, but it does not. G726-32 does work great however, but it's like Asterisk doesn't

Hi everybody, A customer requires G726-40 with Asterisk... I know G726-32 is pseudo-standard, but he definitely wants G726-40... Is there any (easy) way, to integrate G726-40 into Asterisk? Has anyone done this before? Any hints? Please help! Due to a misunderstanding, my product manager already offered this to the customer and now i do not know how to do it... Thanks a lot in advance,

Hi folks ! I bought two sipura 841 phones. I used to have GN Netcom headset which I connect instead of the handset. The problem is that I don't have any sound coming out the headset and I can't speak neither ! I'am located in France and I was wondering if the cabling in the sipura and in the headset is the same (I mean the order of the cables) or maybe is there something else to

hi using the following in sip.conf, codec preferences aren't set, and asterisk uses alaw whatever I do, except force it to one specific in the [user] [general] disallow=all allow=g726 allow=g729 allow=gsm allow=alaw then, from 'sip show peer something' it tells me Codecs : 0x11a (gsm|alaw|g726|g729) Codec Order : (none) can someone please explaing why? this is

I'm new to asterisk and need some help with getting a SIP connection working. I am trying to establish a termination point/DID number in another country. I am currently running Asterisk CVS-HEAD. My foreign provider uses SIP and authenticates via IP address. I am not required to register my SIP connection in order to send or receive calls. Can someone help me with how to understand the

I want to implement a one way announcement and paging facility using Asterisk and Sipura phones. The wiki says Sipura phones only support Auto Answer using the Call-Info header which is no lone shipped with asterisk stable since 1.0.4. I would like to ask if anyone has implemented a similiar facility using Sipura SPA-841 or any other SIP phones. If I could take a look at how

Hi there, I have bought 70 sipura 841 phones for a customer of mine. When following the mass provisioning guide in the admin manual for the sipura, I see it download the spa841.cfg file from my tftp server Sometimes the phone also downloads is phone specific file via tftp, and it works okay then. But, after a reboot of the phone, it is very very likely that it won't startup

Hello list, I have always though codec translation table is dircetly connected to system speed, utill i came across this: in my lab, i have 2 boxes, First box is an Intel Celeron 1.7 GHZ with 256M RAM: show translation Translation times between formats (in milliseconds) for one second of data Source Format (Rows) Destination Format (Columns) g723 gsm ulaw alaw

I'm communicating a softphone (SJPhone) to a Grandstream phone GXP-2000. The codec order on each one is the next: SJPhone: GSM - iLBC - PCMA - PCMU GXP2000: G729 - GSM - PCMA - PCMU (I have a G729 license, so there's no problem with transcoding G729) In my sip.conf, I've defined the following codec order: disallow=all allow=g729 allow=gsm allow=g726 allow=alaw allow=ulaw And my

Ok, With everything restore on rtp.c, still I have no audio however the call is not destroyed immediately as before. I'm going to put a second Granstream box, and findout if between two boxes this happen too. I cannot believe that we cannot do 2 g726 on the same box at one time. Carlos -----Original Message----- From: Carlos Alperin [mailto:calperin@senecacom.net] Sent: Wednesday,

I've been beating my head for 5 hours to figure out why my asterisk server or sipura isn't passing my voice over to the caller. It seems i can hear the caller but they can't hear me it seems either the asterisk or the sipura isn't passing this information. Here's my setup specs asterisk server 0.7.1 - X100P Card - Sipura 2000 - Nufone Service - Voicepulse