similar to: Ztdummy usage

Hi All, Now I configured a linux box as a router. And I installed Asterisk on it. My problem is whenever the WAN is offline all the sip extensions will logon failed. My sip extensions are connected to Asterisk through LAN. Why the LAN side sip phones cannot logon when WAN is offline. Who knows the reason and solution? Thank you so much. I really appreciate. Be Well. lanfei

If your phones are setup to connect to the asterisk box by name, then a smart DNS server can just point phones to the backup box after failure. However, since asterisk running on the backup box doesn't know about the phones, this is only half the solution ________________________________ From: Mohamed A. Gombolaty [mailto:mgombolaty@noorgroup.net] Sent: Thursday, June 30, 2005 8:30 AM To:

Dear All, I have downloaded the xlite version 2.0 for windows and I made the following conf in the xlite itself as the document suggested in order to make it work with Asterisk but still it doesn't work as a matter of fact when I tried to make a tcp dump I can see no packets going between the windows client and the Asterisk server at all, here is the my conf on the xlite itself: in the

Hi, I'm looking for a reliable provider to use mainly for outgoing calls in the UK, incoming isn't so much of a worry as I think I'm going to accept them over ISDN. Cheers! Steve -- Steve Foy steve@narnian.org

Hi, I've install zaptel and I don't have a Digium card installed in the machine. So I want to install ztdummy to have Music On Hold working. I've follow these instruction http://www.voip-info.org/wiki-Asterisk+timer+ztdummy and at the point "modprobe ztdummy" it's failing. I'm getting these messages: root@dubic:~# modprobe ztdummy FATAL: Error inserting ztdummy

Hi i followed this instructions for installing ztdummy on a 2.6 kernel (taken from http://www.voip-info.org/wiki/index.php?page=Asterisk+timer+ztdummy ) cd /usr/src/zaptel * READ /usr/src/zaptel/README.udev and follow the steps * check modules on: /etc/sysconfig/zaptel> if you have no digium hardware comment out all modeules except ztdummy. - make linux26 - make install -

Hi there, anyone has a suggestion about what do I need to do to solve this? Any comments appreciated. Philipp [root@asterisk]# modprobe ztdummy /lib/modules/2.4.22/misc/zaptel.o: unresolved symbol ppp_output_wakeup_Rd2dbbfe0 /lib/modules/2.4.22/misc/zaptel.o: unresolved symbol ppp_input_error_Rd2ca1e76 /lib/modules/2.4.22/misc/zaptel.o: unresolved symbol ppp_unregister_channel_Rb8cf9a74

Hi! When I try to load the ztdummy driver via "insmod ztdummy", I get the following errors: /lib/modules/2.4.26/misc/ztdummy.o: unresolved symbol zt_unregister /lib/modules/2.4.26/misc/ztdummy.o: unresolved symbol zt_transmit /lib/modules/2.4.26/misc/ztdummy.o: unresolved symbol zt_receive /lib/modules/2.4.26/misc/ztdummy.o: unresolved symbol zt_register I'm using zaptel-1.0.8 and

Hi, I am having problem with my Asterisk installation and find out it has to do with ztdummy. if the ztdummy module is loaded, the asterisk playback() command will not play files. DTMF is still properly received. If the ztdummy module is unloaded, sound playback works again. Here is my version zaptel-1.4.9.2 linux-source-2.6.18 asterisk-1.4.18 Can anyone tell me how to fix it? Or should I

Hi all, Trying to build ztdummy on an old redhat 7.3 box running kernel 2.4.20-43.7.legacysmp. Yes, I have the kernel sources installed. Yes, I set them up with make oldconfig; make dep. The build error is: make ztdummy gcc -I/usr/src/linux-2.4/include -O6 -DMODULE -D__KERNEL__ -DEXPORT_SYMTAB -I/usr/src/linux/drivers/net -Wall -I. -Wstrict-prototypes -fomit-frame-pointer -I/usr/src/

Hi to everybody, seems that I cannot load the zaptel modules: ztdummy says the following: [root@Hayabusa misc]# modprobe ztdummy /lib/modules/2.4.22/misc/ztdummy.o: unresolved symbol zt_unregister /lib/modules/2.4.22/misc/ztdummy.o: unresolved symbol zt_transmit /lib/modules/2.4.22/misc/ztdummy.o: unresolved symbol zt_receive /lib/modules/2.4.22/misc/ztdummy.o: unresolved symbol zt_register

I have several servers using ztdummy as the timing source, some CentOS 4.x, some CentOS 5.x, some Asterisk 1.2.x, some Asterisk 1.4.x. "zap show status" differs between the servers: ZTDUMMY/1 (source: Linux26) 1 UNCONFIGUR 0 0 0 ZTDUMMY/1 (source: RTC) 1 UNCONFIGUR 0 0 0 ZTDUMMY/1 1 UNCONFIGUR 0

Hello System: Debian etch with kernel 2.6.18-4-686 or 2.6.18 custom. Asterisk Version: SVN-branch-1.4-r55483M Zaptel Version: SVN-branch-1.4-r2302 modules all ok in compilation time. And modules loaded: ztdummy 5928 0 rtc 13364 1 ztdummy zaptel 181540 1 ztdummy crc_ccitt 3200 1 zaptel In /dev/zap directory I have:

Anybody having issues with ztdummy under the current 2.6 RC7? I get the following errors when trying to modprobe ztdummy: "Unable to register zaptel rtc driver" Doing a Google on the error shows reference to a message from 2004 that said you might not have RTC compiled into the kernel. Checking via: cd /usr/src/linux-2.6.13-rc7 grep -i rtc .config shows: CONFIG_APM_RTC_IS_GMT=y

I've compiled ztdummy, following the directions on http://www.voip-info.org/wiki-Asterisk+timer+ztdummy, and when I try to modprobe zt : #modprobe ztdummy FATAL: Error inserting ztdummy (/lib/modules/2.6.18-gentoo-r6/misc/ztdummy.ko): Input/output error FATAL: Error running install command for ztdummy I haven't been able to find any info on what the I/O error might be or how to

Hi I run asterisk 1.4.2 with zaptel 1.4.1. Zaptel is only needed for the ztdummy driver to get the Meetme() application to work. I don't have any specific hardware. And it does work nicely. When I reboot the machine however I have to manually load the driver like this: [root@vink ~]# modprobe ztdummy Notice: Configuration file is /etc/zaptel.conf line 0: Unable to open master device

Hello- I've been trying to scour both * and linux user group archives for a solution to this particular problem, but I am just plan stuck. I got the latest zaptel sources from cvs, uncommented ztdummy.o in Makefile, ran make; make install then, did depmod -a. All is well up until now. When i do modprobe ztdummy, i get this error: dv@sidetrack:/usr/local/src/zaptel# depmod -a

Hi, when I build zaptel-1.2 and asterisk-1.2 I can modprobe ztdummy and start asterisk to be able to use MeetMe(). When I build zaptel-1.4 and asterisk-1.4 I can modprobe ztdummy and start asterisk but I am not able to use MeetMe(). What do I miss? Stefan -- amooma GmbH - Bachstr. 126 - 56566 Neuwied - http://www.amooma.de Let's use IT to solve problems and not to create new

I was having problems with conferencing when I found a list which suggested that ztdummy might not be loaded. I checked using lsmod and sure enough it was not loaded. When trying to load ztdummy I get an error saying "Can't locate module ztdummy". I am using Asterisk CVS-09/13/03-23:21:19 Any help would be appreciated. Thanks, Chad

It looks like something has changed in the HPET kernel code in 2.6.28 (maybe .27 too) that's stopped ztdummy.c compiling (in 1.2 and 1.4 versions of zapata) A kernel structure member has been renamed with some crypic comments in the lkml about it. Anyone know the right thing to do - I'm not up on the linux kernel guts, nor how ztdummy might interact with it, so simply renaming the