similar to: ISDN RAS and data calls

hi! I'm trying to get zapras working in GSM csd network. Whenever a dialup call is initiated from the mobile to the * gateway the following appears in the log and zapras terminates. Phone gives the error dialup not answered. ==> /var/log/messages <== pppd[2310]: Plugin zaptel.so loaded. pppd[2310]: Zaptel Plugin Initialized pppd[2310]: Using zaptel device 'stdin' pppd[2310]:

I'm trying to use ZapRAS to enable ppp connection through my E1. After the ZapRAS command is executed, all sound is crappy on all lines! The only solution is to reboot the machine (or halt it, and then power it on since Digium's hardware doesn't like reboots). Anyone know how this can happen?! I'm using * 1.0.6 on Dell PowerEdge 1850 which are told (too late though) not to work

Hi, I am trying to use Asterisk cmd ZapRAS (http://www.voip-info.org/wiki/index.php?page=Asterisk+cmd+ZapRAS), I pathed the ppp daemon ftp://ftp.digium.com/pub/zaptel/misc/, but when I try to use it, I obtain the following error: Connected to Asterisk 1.2.4 currently running on TSU-R1 (pid = 7242) Verbosity was 0 and is now 44 -- Accepting call from '123456789' to

Hi, I'm trying to get zapras do work, I had downloaded the pppd-source and the 2 patches. I succefull compiled and install the patched version of pppd, but got this error in message-log Jul 15 11:43:32 voip1 pppd[9296]: In file /etc/ppp/filters: unrecognized option 'active-filter' Jul 15 11:43:57 voip1 pppd[9299]: Plugin zaptel.so loaded. Jul 15 11:43:57 voip1 pppd[9299]: Zaptel

Hello all! Sirrix AG, Saarbr?cken (manufacturer of the Sirrix.PCI4S0 4-port ISDN card for Asterisk) has released the new Asterisk dialplan command PPPD (app_pppd). It allows to connect a Linux PPP daemon to an arbitrary digital (ISDN) Asterisk channel to provide RAS dialin and dialout. The PPPD command has successfully been tested with Sirrix.PCI4S0 cards and a standard ISDN4Linux ipppd "on

Hi I try to use zapras. I am using zaptel-bri-0.0.2 I compiled and patched pppd from ftp://ftp.digium.com/pub/zaptel/misc/ pppd is /usr/sbin/pppd Any idea whats going wrong here? Thomas -- Accepting call from '95' to '8526' on channel 1, span 1 -- AGI Script nuller.agi completed, returning 0 -- Executing ZapRAS("Zap/1-1",

Hi, Last weekend I was planning to buy a physical PBX system, but instead I have been blown away by the fact that VoIP really works, that Asterisk is so easy to set up and use... and free! We're in Australia, so as I understand it, we aren't allowed to use the Zaptel cards. We need to set up our system to route incoming 56K data calls to the PPP daemon on our Linux box or to our

hi everybody, i'm tryint to install a asterisk system which acts as a dialin server using a Digium Wildcard 205P. acording to http://www.voip-info.org/wiki/view/Asterisk+cmd+ZapRAS i need a patched version of pppd, but it does not compile on my system. Linux box 2.6.17-gentoo-r8 #1 SMP Tue Sep 26 13:17:23 CEST 2006 x86_64 AMD Athlon(tm) 64 Processor 3200+ GNU/Linux gcc -4.1.1, glibc-2.4

Hello my name is Ilija Poznic and I have a problem. My configuration is 1. Digium TDM4000P with one FXS. 2. AVM Fritz ISDN adapter (configured with capi). When I connect to my ISP and then start *. Asterisks is registering me to SIP provider iconnect. After that I can call international call trough VoIP. My problem is that I want to dialout to ISP only when I have a international call.

Hi, I'm trying to get ZapRAS working but not getting very far.. Asterisk CLI shows: WARNING[3355]: app_zapras.c:173 run_ras: wait4 returned -1: No child processes and /var/log/messages shows: using the plugin option requires root privilege Can anyone shed any light on this and any fix? Googling the error doesn't find much.. I'm not sure what 'plugin' it is talking about,

Hello, i have ported the BCP (Bride Control Protocol) patch for pppd 2.4.1 mentioned in http://lists.osdl.org/pipermail/bridge/2004-September/000619.html to pppd 2.4.2. The kernel patch still works without problems with kernel 2.4.30. Perhaps someone else could use this patch ... Here again some documentation i have found about the BCP patch somewere else: When pppd negotiates BCP, it tells

I try to setup a PPTP VPN server on Centos 7 and from client a router Vodafone Station (Firmware 5.4.8.1.316.1.21) On c7 I have install this: [root at s-virt tmp]# rpm -q pptpd ppppptpd-1.4.0-2.el7.x86_64ppp-2.4.5- 33.el7.x86_64 and setup all file and firewall like howto say.This now is my config: /etc/pptpd.conf:option /etc/ppp/options.pptpd/etc/pptpd.conf:logwtmp/etc/pptpd.conf:localip

Hi! I've been trying to get ZapRAS or PPPD to work. Neither does! All i get is LCP: timeout sending Config-Requests But after trying, all voicelines get crazy! It sounds like robots when somebody calls! And since the zaptel drivers can't unload (the server hangs totaly if I try!), I have to reboot the whole server! The robot-voice is only on our side, it sounds fine at the other end.

I'm trying to set up a Linux-based dialin server on our company network. I'd like to have PPP authenticate using winbindd, if possible. I feel like I've almost gotten it to work, but I can't quite get there. Files: /etc/pam.d/ppp: #%PAM-1.0 auth required pam_nologin.so auth sufficient /lib/security/pam_winbind.so account required

Hi folks, Don't know if it could be interesting or not, even useful, but past days i was spending my time trying to use an old gsm motorola v150 mobile phone to get access to my host from my palm device with pssh (http://www.sealiesoftware.com/pssh/), these are the steps i did to accomplish it, feel free to suggest or improve it, anyway i found it usefull. First, this motorolla has an usb

On 05/11/15 18:40, Steve Ankeny wrote: > On 11/05/2015 12:14 PM, Reindl Harald wrote: >> >> >> Am 05.11.2015 um 18:08 schrieb Steve Ankeny: >>> 'network-manager' is not installed but 'resolvconf' is -- >>> >>> adam at eagle:~$ cat /etc/resolv.conf >>> # Dynamic resolv.conf(5) file for glibc resolver(3) generated by

On 11/05/2015 12:14 PM, Reindl Harald wrote: > > > Am 05.11.2015 um 18:08 schrieb Steve Ankeny: >> 'network-manager' is not installed but 'resolvconf' is -- >> >> adam at eagle:~$ cat /etc/resolv.conf >> # Dynamic resolv.conf(5) file for glibc resolver(3) generated by >> resolvconf(8) >> # DO NOT EDIT THIS FILE BY HAND -- YOUR

AHOI! I've big trouble by setting up CentOS 6.3 for my new vDSL. As I've found out, the German Telekom is using VLAN7 for her internet-(data) connections. => http://workaround.org/blog/vdsl O.K. what I've done: The NIC where's my DSL-modem is connectet is eth0. cat /etc/sysconfig/network-scripts/ifcfg-eth0 # device for vDSL-modem DEVICE=eth0 HWADDR=00:30:1B:14:08:67

Blame guus. -- Rob 'robster' Bradford Chief Editor/Lead developer DebianPlanet.org -------------- next part -------------- Sep 1 10:24:02 zeus syslogd 1.4.1#2: restart. Sep 1 10:24:17 zeus pppd[326]: rcvd [LCP EchoRep id=0x92 magic=0x9936a81f] Sep 1 10:24:47 zeus pppd[326]: sent [LCP EchoReq id=0x93 magic=0x48b43815] Sep 1 10:24:47 zeus pppd[326]: rcvd [LCP EchoRep id=0x93

Hello all, I am working on a VPN solution using FC3-2.6.12-1.1381 - openswan 2.4.4-1 - l2tpd 0.69-13 - pppd 2.4.3-5 - samba 3.0.10-1. When attempting a connection from an XP-SP2 box pppd dies without authenticating the user (see below). I have run ntlm_auth from the command line with success. What tools can I use to identify the failure? Is there an obvious error in the ppp options file?