Displaying 20 results from an estimated 2000 matches similar to: "Unable to create channel of type 'Zap' with zaphfc driver"
2007 Jul 17
5
Zap channels unavailable?
Hi,
Lately we've noticed that some Zap channels on one of our PRIs are
unavailable. We have 2 PRI lines with 60 channels in total. On the first
PRI there are currently 20 channels that are not being used for some
reason.
I tried googling around and found some similar problems but there really
was no solution (?). I'm not sure if this problem has occured now
because of more load on the
2005 Sep 26
0
ZapHFC Channel unavailable
I am running Asterisk 1.0.9 and the latest bristuff in combination with a
HFC isdn card, connected to a BRI interface.
For some reason, I am not able to have it dial out (see below). It exits
with DIALSTATUS=CHANUNAVAIL.
One thing that may be misconfigured is that it says: Signalling Type: PRI
Signalling.
How do I change this? Or is this the correct value?
I posted my configs below.
------
2005 Jun 28
0
BRIstuff/OctoBRI problem: Ring requested on unconfigured channel 255/255 span 5
Hi all,
I just posted this question before last week.
Meanwhile after upgrading Asterisk 1.0.7-BRIstuffed-0.2.0-RCg to
1.0.8-BRIstuffed-0.2.0-RCh
the same problem occurs, but seems to be more seldom.
Attached is now the output of "zap show channel" .
-
I'm running a stable Asterisk on a HP DL380G2 1.4Ghz 0,5GB RAM
equipped with 1x TE410P and 2xJunghanns OctoBRI running in NT-mode.
2008 Oct 20
1
Zaptel FXO offhook when connected to PSTN
I installed Trixbox and a TDM400P with 2 FXO and 2 FXS ports and am having
an annoying issue with the FXO ports. As soon as I plug either one into the
phone line it's as though the line is disconnected i.e. get disconnected
tone when trying to dial out, line is busy when dialling in.
The CLI shows the following:
trixbox1*CLI> zap show channel 4
Channel: 4
File Descriptor: 18
Span: 11*
2008 Nov 11
1
What makes TDM400 FXS Connection to TELCO go into Off Hook State?
I've been having trouble with making outbound calls to my
TELCO from a TDM400 card (FXS KS signalling) after upgrading
from 1.6-beta9 to 1.6.0. The problem is completely intermittent.
When it fails, I get this message:
[Nov 9 19:12:26] WARNING[18916] app_dial.c: Unable to create channel of type 'DAHDI' (cause 0 - Unknown)
At some point, it starts working, but I don't know what
2004 Jun 07
4
Modem Calls
My office is investigating using an Asterisk PBX and also going to a VOIP
provider for our main phone connections, but one of the tricky things is that
we need to have outbound and inbound modem calls (fax too).
I see a lot of talk about faxes but no mention of modems on this list. I get
the impression that modems will be a problem for us. Is that true?
2009 Aug 17
0
Echo on TE121B with hardware echo module
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
</head>
<body bgcolor="#ffffff" text="#000000">
I recently upgraded my Asterisk system to Dahdi and now I have an echo
problem.<br>
<br>
I am running Asterisk 1.4.25 with Dahdi Complete 2.2.0, on a Digium
TE121B PCI express card with a HARDWARE echo
2005 Aug 12
3
TDM400P FXO channel hookstate always "Offhook" & outbound digits sent before provider dialtone
I have an Asterisk@Home 1.3 server (Asterisk 1.0.9) and recently added a
TDM400P with (1) FXO card on port 4. Inbound calls are always successful
but outbound calls fail 75% of the time with intercept messages from my
dial tone provider that include "we're sorry, your call did not go
through", and "we're sorry, when placing a local call it is now
necessary to dial an area
2005 Sep 30
2
Echo Cancellation not working in Zapata.conf
I have echocancel=yes in zapata.conf but when I do a zap show channel 1,
I notice echo cancellation is turned off.
I followed the article that talks about the order in which the
statements need to be in zapata.conf to get echo canceling to work:
http://lists.digium.com/pipermail/asterisk-users/2005-June/110615.html
But it is still not working. Does anyone know how to get echo
2004 Jul 11
1
Echo issues (again...)
OK... so I'm not sure what I'm looking at. I've had the good old echo
problems on my Rev C FXO again this morning, so I thought I'd attempt
some debugging, though I'm not sure what I'm looking at.
This call has echo.
Channel: 2
File Descriptor: 20
Span: 1I>
Extension:
Dialing: no
Context: incoming
Caller ID string: "External Call" <99999999>
Destroy:
2010 Mar 18
6
Asterisk DIES with no trace. PLEASE
Thanks Zeeshan,
SAngoma told me that the asterisk problem is unrelated to wanpipe drivers,
they told me to reinstall asterisk again
But, i still having doubts about the problem :(
Thanks in advance
>
> Message: 10
> Date: Thu, 18 Mar 2010 00:21:06 -0400
> From: Zeeshan Zakaria <zishanov at gmail.com>
> Subject: Re: [asterisk-users] Asterisk DIES with no trace. PLEASE
>
2009 Sep 27
2
DAHDI congestion problem
I am unable to dial out over a Wildcard TDM400P. This was working previously, so must have
messed up the config somehow. I'm running Asterisk 1.6.0.15, with FreePBX 2.5.2.2.
When I dial, I see:
-- Executing [s at macro-dialout-trunk:19] Dial("DAHDI/1-1", "DAHDI/g0/9239220,300,") in
new stack
== Everyone is busy/congested at this time (1:0/1/0)
It looks like the
2007 Sep 27
1
Zap channel stuck in conference
Hello, I have a strange problem with one of my Zap channels. A user told me
that he was in a voicemail system during a call, hit the Flash button, and
the call hung up. Now we get no dialtone on the phone hooked up to the
channel. Here's the status of the channel:
jmartin at rogue:~$ sudo asterisk -r -x "zap show channel 7"
Parsing /etc/asterisk/extconfig.conf
Channel: 7
File
2005 Jan 24
2
Wildcard TE405P and TDM400 - TDM not working
Im having a problem getting the 2 cards working together.
I added the TDM with 3 FXO and 1 FXS board.
The TE405p is working fine. THe TDM registers and identifies the FXO's
and FXS but cant get them to go off hook.
I hope someone can help.
Asterisk seems to THINK its dialing it sends manager status as dialing,
and it just sits there with no tones, on the phone dialing out.
If I dial,
2010 May 07
1
DAHDI astribank Channel Unavailable
Hi guys,
This has been bugging me for days and I can't figure out what's happening.
Using the same channel on DAHDI, I can't make a call after previous one being hung up by remote side. However, it works like it should if my end hangs up the call. To make things interesting, DAHDI, or astribank rather, seems to "reset" itself after receiving an incoming call on that DAHDI
2005 Feb 07
0
can not dial problem
I have a TDM400P with fxo and fxs modules, and local extension calls work fine but
I can not dial-out. I am getting both problems on FreeBSD and Linux, and plugging
a regular telefon set works fine. Any ideas of what I am missing?
thanks
micko
Zaptel Configuration
======================
Channel map:
Channel 01: FXO Kewlstart (Default) (Slaves: 01)
Channel 02: FXS Kewlstart (Default)
2005 Mar 25
1
X100P FXO card-No Dial Tone
Hi
I have the X100P card which as to sockets (LINE - for fxo line ) and PHONE (to connect a n analog line)
This card is setup as fxs_ks
I was getting dial tone but suddenly no Dial Tone....Help appreciated....
When I try to route the Call using - Dial Zap/1) to this FXO Line I get this error:
-------------------------------------
linux*CLI>
-- Executing
2005 May 23
0
All channels on PRI stuck "Resetting"
Hi,
I've a busy server where one E1/PRI span has been behaving oddly.
Here's the span:
Primary D-channel: 16
Status: Provisioned, Up, Active
Switchtype: EuroISDN
Type: CPE
Window Length: 0/7
Sentrej: 0
SolicitFbit: 0
Retrans: 0
Busy: 0
Overlap Dial: 0
T200 Timer: 1000
T203 Timer: 10000
T305 Timer: 30000
T308 Timer: 4000
T313 Timer: 4000
N200 Counter: 3
Looks good, eh?
But every
2004 Jun 20
1
Data over Voice through Asterisk
Hi,
I'm trying to make a dialup internet connection through my asterisk
PBX. When I bipass the Asterisk box, I can get 51600bps. When I run
through the asterisk box, I'm limited to about 21600bps.
I have a TDM31B card.
Any help on speeding these connections up would be good - I was on the
understanding that if you bridged the channels, then the call should
essentially flow straight
2005 May 26
3
Analog Telephone Adapter
I'm looking for a good, reliable, and cheap 4-port FXS ATA. Does
anyone know of one that works with Asterisk?
Thanks,
Waldo