similar to: Upgrade cause's no Audio on IAX

Hi there I am pretty close on giving up on Asterisk :-/ I am (still) trying to make a call from a H323 phone to an Asterisk provider using AIX. But H323 does not route the number to AIX. All it is transmitting is an "s". *CLI> -- Executing Dial("OH323/R27865", "IAX2/demo:demo@gw1.musimi.dk/s") in new stack -- Called demo:demo@gw1.musimi.dk/s Jul 2

Hello r helpers! Below is the whole coding for my programme. Before proceed more further, let me explain for you. First of all, I need to compute trimmed mean. Till that step is ok. Then I need to compute ssdw which is sum of square deviation. If I do equal trimming at both tail of distribution that I chose, I will use the first ssd formulae which is "a". But if I am doing unequal

I'm trying to link up Cisco MGCP-enabled router (residential gateway) with Asterisk, and it looks like some sort of protocol mismatch, could it be MGCP 0.1 vs 1.0? Look at this (x.x.x.99 is the router, x.x.x.98 is Asterisk): MGCP read: NTFY 2 aaln/0@voip-gw1 MGCP 0.1 X: 0 O: hd from 192.168.154.99:2427MGCP read: NTFY 2 aaln/0@voip-gw1 MGCP 0.1 X: 0 O: hd from 192.168.154.99:2427Verb:

Hello list, hope someone can help me - I'm going crazy using the FXO port a SPA3012. I would like the SPA 3012 to act as a simple FXO port to an Asterisk, that is, once it detects a call, it should simply send it over to the local Asterisk server. No intelligent routing, PIN, anything else.... I configured it like this: PSTN-To-VoIP Gateway Setup PSTN-To-VoIP Gateway Enable: yes PSTN

Hi all, I was just on the phone with a B2C company in Australia who are looking to integrate an Asterisk solution with their Salesforce.com CRM platform. They are looking for a consultant/team to provide the following functionality * Complex IVR Eg can interface via API into Salesforce for customer service interaction and product initiation. * Call centre Eg basic queues,

Hi Who concern, I setup TINC VPN follow these. 192.168.1.x / 24 (Client groups) | 192.168.1.1 (eth1) (GW1) 202.44.34.206 (eth0) || Internet || 202.44.45.14 (eth0) (GW2) 192.168.2.1 (eth1)

Hi, I've searched the archive but can't seem to find the answer to my problem. i have two gateways running with asterisk , my question is : is there any possibility to do failover with gateways with asterisk ? i mean that if one gateway is down , asterisk switch automatically to other gateway . i have succefully used failover with limit number off calls (if gw1 have max calls ,asterisk

please can someone send to me his files like zaptel & zapta if he si using TE110P thank you

Hello, I'm researching the possibility of using VOIP (SIP) with an existing PABX system. Ideally, the setup would be to dial an outside line through the PABX (that would actually link to the the VOIP gateway). At this point I would prefer not to purchase a hardware-based VOIP gateway. I would prefer to use a software-based gateway for research & testing purposes. Could anyone please

I have setup my Asterisk 13.1.0 server with PJSIP on AWS/EC2. My basic configuration works, and I am connected to a SIP trunk using SIP.US, and have set up my inbound calling which works correctly (when I call my PBX DID, the call does come into my PBX network). The issue is that I am not able to make outbound calls, because the call fails with the error:

This post is simply documenting a spouse-friendly way of using the spa-3000 as both a fxs and fxo port for basic soho environments in the US, allowing asterisk to participate as needed/wanted. All home phones are connected _only_ to the spa-3000 fxs port. The incoming home pstn line is connected _only_ to the spa-3000 fxo port. Defined Line 1 (fxs) to register with asterisk via sip (extn

I seem to be having a problem with transcoding and/or agreeing on a valid codec. I am running a new image pulled from CVS at 1:30 PM CST. The issue occurs when I try to make a call to a toll-free number over sipphone.com. Here's what I see in the console: NOTICE[1259545280]: File channel.c, Line 1478 (ast_set_read_format): Unable to find a path from G729A to ULAW NOTICE[1259545280]: File

That was the issue, thanks. I now am able to get the caller ringing on an outbound call, but an external phone number (E164) I am dialing does not ring. On Sun, Mar 15, 2015 at 12:19 PM, George Joseph <george.joseph at fairview5.com > wrote: > > > On Sun, Mar 15, 2015 at 8:32 AM, Sonny Rajagopalan < > sonny.rajagopalan at gmail.com> wrote: > >> I have setup my

Hello, I have a strange situation with an SPA3102 FXO/FXS device. I'm in situation that when i receive a call from PBX line I must forward the calls to 2 VoIP numbers. Right now i have the following settings: (S0<:1010 at GW1>). I want to forward at 1020 too. I tested (S0<:1010|1020 at GW1>) and doesn't work. Did you have any other ideea? Thank you.

Hi All, I have two Asterisks, one on the LAN that handles the internal calls with a PSTN interface and one on the DMZ with a public interface. I would like to route SIP calls from the internal users to the Internet over IAX2 to the DMZ and onwards. All users have soft phones so they would enter sip:someuser@somevoip.org to get a connection. I would like to avoid having number prefixes to dial

I have the following in extentions.conf: exten => 2111,1,Dial(SIP/2111 at gw1.langley) exten => 2111,2,Voicemail(u2111) exten => 2111,3,Hangup exten => 2111,100,Voicemail(b2111) exten => 2111,101,Hangup I have the following in sip.conf: ; Cisco 1750 [gw1.langley] type=friend host=172.16.17.1 context=default canreinvite=no Like the ATA, lots of stuff doesn't work on the 1750

Hello All, Anyone here has experience of accepting a ilbc call and sending it on g711 or g729 I am having problem in VOICE , call goes though but there is no voice. Senario: Call is coming in from Machine A to Machine B, sending to Machine C Machine B is an asterisk box, transcoding it from IBLC to G711 and g729. Problem: Voice is not appearing on the sip user sitting on machine A Already

Does anyone know how long the orders take? I ordered some a couple of days ago and it said normally 24hours, and I am guessing that the weekend cause's some delays but it did not say anything abouy that. Any one got any ideas on how long generally over the weekend it takes? Thanks David

Hi list, I have a very strange problem with my network. I have 2 internet connections: A - 1 Gbit, B - 100Mbps. Network layout: A, B | | [Brd1] / \ [L1] [L2] \ / [ GW1] ................... Clients ..................... Brd1 runs bgpd, and balances the traffic through L1 and L2. L1 and L2 do traffic shaping. GW1 does some packet

Hello, Does anyone have experience with a %100 all VoIP * setup? I imagine an office with 50 extensions or so, a full T1 connected to a decent ISP and an account with NuFone (IAX2 trunking, G729a). I would need to support at least 25 simultaneous outgoing (7960G -> Asterisk -> NuFone -> PSTN) phone calls. I would probably keep four or so analog lines for local calls, 411, 911,