Displaying 20 results from an estimated 11000 matches similar to: "Cisco Call Manager & Asterisk for Voicemail"
2006 Jan 30
1
Asterisk SIP phones to Cisco Unity via CCM4.0SIP Trunk
It can be done.
1. Setup a new Vm profile on CCM with a mask of XXXX
2. Setup a CTI route point:
a. Set the directory number to a pattern. I use *27XX
but any pattern that you can send from * is good, ie. 88XXX
b. Set the VM profile to the newly created profile
c. Set the line to forward all calls to VM
3. Change the dialplan in * to append the extension called to
the
2005 Sep 18
7
Cisco Callmanager & Asterisk for Voicemail revisited
Some of you may remember back in May the thread on using Asterisk as a
voicemail server for a Cisco Callmanager system.
My own Callmanager system is integrated into an Asterisk server for
voicemail (and other things). Back in May I was using H323 for
integration, but since I've upgraded to CCM 4.1 I have switched over
to SIP.
The integration with H323 required using Call forwarding to send
2005 May 25
2
RTP path with Cisco CCM
Hi,
I have the following config:
[7960] <--skinny--> [Cisco CCM] <--SIP_trunk--> [asterisk] <--SIP-->
[X-lite]
Is there a chance to avoid the RTP stream from passing through the Cisco
CCM ? I would like to have all RTP handled by the *.
This is just a testbed, for a larger project. What I want to achieve, is
actually this:
[Cisco Phone] <--skinny--> [Cisco CCM]
2003 Jul 24
1
Cisco's CallManager and * (was: Cisco 7960g) (fwd)
On Wed, 23 Jul 2003, Yifang Dai wrote:
> I wish! My company just spend a lot $$ on the shinny CCM phone system, so I
> don't think I can change that easily... But if I can get asterisk to
> talk to CCM via h323, and prove it's usefulness, I might have a chance
> to use * in the branches...
Well, good luck, then!
> By the way, do you know if we can get *'s VM to
2006 Jan 23
1
Asterisk SIP phones to Cisco Unity via CCM 4.0 SIP Trunk
Hi,
I've got a CCM ( Cisco Call Manager ), with a Cisco Unity VM server and
about 45 SCCP phones on the ccm, and 200 users on unity. we want to
migrate all users to IP Phones to ditch our ancient phone system. I would
love to get Linksys-Sipura SPA-941s for the 150 users not on IP phones yet
and run sip to an asterisk server, but have their voicemail on Unity.
these phones are $150 each,
2006 Feb 01
1
Asterisk SIP phones to Cisco Unity via CCM4.0SIPTrunk
> thanks, using your example, and this url:
>
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note0
9186a00800dea82.shtml
<http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note
09186a00800dea82.shtml>
> I got it to work... then I realized that there's no way the SIP
phone > on asterisk is going to get the MWI ( message waiting
2004 Jan 11
1
More Success on the Cisco 7920 and SCCP !!!!!
Hi All,
have some decent success on the 7920 "activation" in Asterisk.
Latest status:
chan_skinny does NOT work with 7920
chan_sccp does WORK with 7920 (!!)
however:
to remove coredumping the chan_sccp just comment out the MWI
(messagewaitingindicator), then it compiles fine.
Then change sccp_helper.c: return "P0060302" instead of the old value.
and voila:
Phone is
2008 Jul 22
8
Cisco vs Asterisk
Hello all,
A client of us, is thinking to migrate their actual PBX to a Cisco
CallManager. We want to sell him an asterisk box to complement the
Cisco PBX.
I think to use asterisk as a Voicemail server (Replazing the Cisco Unity)
Has asterisk all the functionalities to replace a CIsco Unity server?
Which functionalities Cisco Unity has than asterisk could cover?
How could asterisk complement the
2008 Feb 28
2
Asterisk and Cisco Unity?
Has anyone here any experience in getting an Asterisk box to talk to
a Cisco Unity system? I have a potential customer who would like to
add a conference bridge to their existing Cisco Unity setup.
The digging I have done so far suggests that it should be possible to
talk SIP between them, but I'd be interested in any stories of success
or failure.
Cheers
Tony
--
Tony Mountifield
Work: tony
2009 Apr 10
3
Can Asterisk bridge between a SIP client and a Cisco Call Manager server?
Hi,
This is probably outside what Asterisk is intended for, but I'm hoping it can
help.
I need to make and receive calls through a Cisco Call Manager server that I
have no control over. I have to use a Cisco soft phone (Cisco IP
Communicator), which only runs on Windows. But I'm on Linux. CCM is
apparently capable of supporting SIP and H.323 interfaces, but they won't
provide
2006 Apr 03
6
Pickup() h323
Hello,
I can use directed call pickup using pickup application (between sip,
iax, skinny cals),
but unable to pickup call that is ringing on phone behind h323 gateway
(using original h323 channel in asterisk), is this even suported?
thx
PJ
exten => _*7.,1,Pickup(${EXTEN:2})
console log, when trying o pickup ringing line 324 (h323), from skinny
phone (953)
-- Executing
2003 Jun 03
3
Cisco 7905G phone
Hi to all,
I've just received my Cisco 7905G ipphone. I want to connect it to asterisk
server but it looks that it has been preloaded with sccp protocol, so I
guess I need H.323 or SIP firmware image of some kind. I have a working tftp
server on my asterisk box also....What do I need to do now to get things
wokring?
Thanx in advance,
Victor...
2009 Apr 16
1
Can Asterisk bridge between a SIP client and a Cisco Call
>
> Hi,
You can achieve this by integrate CCM and asterisk using SIP trunk.
In CCM you can create SIP trunk, After creating SIP trunk in between CCM and
asterisk, you have to configure dialplan on CCM to pass the calls to
asterisk.
One the caller id comes to Asterisk you have to use extension.conf to route
the calls.
You can also try with freepbx GUI to configure inbound route, it makes
2003 Jun 20
7
Newbie questions.....
Hi.....
I have just successfully setup Asterisk with 2 Cisco 7940 phones (converted
for SIP) and a SIP softphone on a W2K box.....and it all seems to work very
well.....to those who wrote this software, it is really cool.
Anyway, I am new to this software, and I have a lot of questions which I am
hoping someone on the mailing list might be able to answer for me.....I am
basically trying to
2004 Oct 01
1
upgrade goof up
Here's the problem, I upgraded all of my 7960 phones to SIP. Now my boss
wants to carry his phone with him between offices. The other office has CCM
which is set up for Skinny. Now I have to put SCCP back on a 7960 phone and
it won't take it. Does anyone have an example of config files for sccp.
Are they the same as config files for SIP? I've never had to go back to
Skinny once I
2003 Sep 18
1
Skinny + XMLDefault
Please forgive me my ignorance ...
I've spent two days trying to find out something about the format of the
default configuration file, which CCM produces. The only example I have so
far is the one from the chan_sccp source.
There were tons of references on entering the callmanager commands on a
cisco command line - which I don't have (don't need thanks to
chan_skinny + chan_sccp).
2007 Sep 27
15
Cisco 7940G licensing with asterisk
Hi there,
In Cisco web site
http://www.cisco.com/en/US/products/hw/phones/ps379/products_data_sheet09186a008008884a.html
It says that regardless of the technology used you have to buy a licencse.
Does the license apply to use the phone with asterisk, or, can i just
buy the phone?
Also, the phone does not requiere to use an AC adapter if used with
PoE injectors/switches.
Can non-Cisco PoE
2004 Apr 21
9
Cisco 7940/7960 SIP functionality questions
Hello,
I'm considering using Asterisk with some type of Cisco phone, and currently
considering either the 7940 or 7960 because of its more-complete functionality
(compared to the 7905).
I'm currently wondering:
Do all the expected functions (transfer, conference, voice mail, message
waiting indicator, etc.) work normally with Asterisk over SIP?
What caveats are known about using
2003 May 24
2
For the Australian Asterisk users
I've noticed that a few people here are from Australia.
I'm wondering where you all get your hardware from. I'll probably order some
of the X100P cards from Digium soon (and possibly some FXO cards), but for
other things such as ATAs, etc.
However - these obviously aren't ACA compliant. Does anybody know of
compatible hardware (for POTS lines) that is ACA compliant?
The cheapest
2013 Sep 28
1
problem to get MWI working
Hello,
I am trying to get MWI working after integrating Asterisk with CCM.I have followed the instructions in http://www.voip-info.org/wiki/view/Asterisk+Cisco+CallManager+Voicemail+IntegrationMy problem is that I don't see externnotify's script being called at all in the logs, and not sure if I miss something here!
In Voicemail general I addedpollmailboxes =