similar to: Squid caching

Does any know of a way to sync the hardware clock without a reboot? Graham Johnston Senior Network Analyst Westman Communications Group 204.725.4300 ext 382 johnstong at westmancom.com -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20060719/70ef23ce/attachment-0002.html>

I am having an issue with Centos 6 and an external USRobotics modem. We use the modem as part of a last resort SMS paging system. Across multiple Dell servers, different models, I can't not get the modem to respond to simple AT commands while using Minicom. At the same time if I connect the server to a console port on a switch I can successfully access the switches serial console. So I

I am using CentOS as a firewall/router. I am using bonded interfaces, vlan interfaces, and bridge interfaces. My problem currently is that on boot the system is attempting to activate the bridge interface before it's bonded-vlan members have been created. What this means is that the bridge is created but not activated. Is there anyway for me to influence the activation order and have

What are people using for a gui mib browser under centos 4. I used to use mbrowse under 3, but it doesn't seem available. Thanks in advance Graham Johnston Senior Network Analyst Westman Communications Group 204.725.4300 ext 382 johnstong at westmancom.com -------------- next part -------------- An HTML attachment was scrubbed... URL:

With the current discuss of "Performance of CentOS as a NAT gateway", I am curious how many people out there are using CentOS as a Router/Firewall in an enterprise or service provider environment. For myself I am not really concerned about NAT just a stateful firewall. The other half of my questions is about performance. I have read many articles and posts on the net about

Anyone here using Quagga/Zebra and OSPFd to accomplish Equal Cost Multipath. I have Quagga up and working I just can't get it to insert more than one route into the kernel for any given destination. Graham Johnston Senior Network Analyst Westman Communications Group 204.725.4300 ext 382 johnstong at westmancom.com -------------- next part -------------- An HTML attachment was scrubbed...

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I am attempting to configure a Linux firewall/router using mandrake 10.1 with shorewall 2.0.8 that will redirect http, ftp, real, quicktime, winmedia, and nntp to a Network Appliance NetCache transparent caching proxy. Here''s what the network layout looks like: ~ Net ~ | ~ Linux fw/router ~ | - ------Switch-------- |

Hi everyone, not exactly security, but might give the wrong impression about the state of your security... Greetings, Jan-Philip Velders <jpv@jvelders.tn.tudelft.nl> -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- | Nederlandse Linux GebruikersGroep : http://www.nllgg.nl | -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- _---------- Forwarded message ----------

I have 2 internet connections and i;m trying to use squid as transparent proxy but every time squid is using first internet line but i want to use second internet line . i have this settings and without squid it''s working i have default route on the first internet connection. iptables -t nat -I POSTROUTING -o eth2 -p tcp --dport 80 -s 192.168.0.0/24 -d ! 192.168.0.0/16 -j SNAT --to

hey friends, I am trying to configure Squid Transparent Proxy on Centos4.0. The eth0 is connected to the Internet and eth1 is for the LAN connection I am testing this scenario with 2 machines one machine (Centos4.0 ) on which squid is running and other machine which is debian is on the network 192.168.2.0. Centos4.0 eth0: 192.168.1.125/24 eth1: 192.168.2.126/24 Debian: eth0:

Hiya, i have a squid-2.5.4 transparent proxy working in http accelerator mode (i.e. web servers are behind the squid, and all www records point to the squid IP) and i want to implement some sort of bandwidth management so, for example, any given hosted website/server won''t eat more than let''s say 1Mbit of upstream bandwidth, i have recompiled squid using Patrick Mchardy

List Out of interest, I use transparent squid proxies for caching websites, and I shape the clients that browse the net, this all works perfectly so no questions in this regard... CLIENT <--- eth0 ----> SQUID <----- ppp0 -----> NET What I just realised was that all egress traffic on eth0 gets shaped, squid gets data from ppp0 and hence is not shaped. Does this mean that squid

Hi Friends, Same question has been asked on the Squid mailing list but so far no reply on the mailing list so posting it here also. We are trying to cache some files from apple.com like .dmg, .pkg, .ipa etc.. so that local clients can fetch the data from the cache. The problem we are facing is that we have download restrictions for every client to 25 MB during work hours except for a particular

Hello! My system is: Internet ADSL(PPPoE) ---> ppp0 [LINUX server(router)] eth0 ---> LAN Server(router) is running on LINUX Slackware 8.1. I have recompiled a 2.4.22 kernel, enabled all QoS support in the kernel config, including HTB. My ADSL bandwidth is 256Kbit/s for download and 64Kbit/s for upload. I use the following HTB+IPTABLES configuration, because I want to reduce bandwith for

Hi, I've been working with Squid + SquidGuard for a few years, though only on Slackware. I'm currently transferring my proxy expertise to CentOS 7, and right now I'm having a little problem with that. Squid works perfectly so far as a transparent HTTP + HTTPS cache proxy. The next step is to add SquidGuard, so I installed it and edited the most basic /etc/squid/squidGuard.conf file

Hi i have a big problems on Winbind/squid ... I use it for the authentification of my user but i don't know why, that's don't work all time ... On one web site, i can have the authentification on the page but after 2 or 3 pictures are in "not authentified" .... He have a cache for the login/pass ? He have a special config for squid ? thanks for your help

Hi all, (not sure that this is the right places where send this. sorry) I think that http://www.shorewall.net/Shorewall_Squid_Usage.html must be updated. The current SQUID version (2.6) don''t support anymore the ''httpd_accel'' directives. So anyone that would follow this guide for configure a transparent proxy will receive an error 400. Please modify the guide as

Hi, I just setup a very basic HTTP proxy with Squid on a router running CentOS 7. Up until early 2020 I've been using a bone-headed shell script with iptables to configure my firewall. But I decided to follow advice from a few gurus on this list, and I've since moved my configurations to FirewallD, which works nicely. There's one configuration left to tackle, that's port

Hi, Another idea - but this gets complicated and with that, prone to faults - use a simple shell script to resolve the desired domains and keep their IPs in an ipset, then use the ipset in your firewall rules, this way you can keep your iptables rules static, your squid config static and simply add or remove IPs from the ipset. -- Sent from the Delta quadrant using Borg technology! Nux!

Le 11/03/2018 ? 13:09, Leon Fauster a ?crit?: > It is not a good practice to place domain names into iptables rules. Define > a custom table, place this table into your rule list (to stick at the right > place) and feed that table with the resolved domain names. This can be altered > while running in the case of changes (check resolving results periodically). I admit I've never