similar to: Cisco ATA 186 with *70

I have recently upgraded my firmware from v6.3 to v7.4. Now when the phone is booted or rebooted, the initial screen "Initializing Vlan" takes forever to initialize before it initializes IP. Any ideas/Thoughts? (Trying not to Revert back to v6.3). -C -------------- next part -------------- An HTML attachment was scrubbed... URL:

Was in the process of upgrading a 7960 to SIP and in advertently applied a skinny image (P003G302.bin), now no matter what i put in OS79XX.TXT and OS7960.TXT it simply wont upgrade. The phone is pulling down OS79XX.TXT from my TFTP server but then goes on to repetedly ask for SEP<MACaddr>.cnf. Help!! -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello list, i am using: asterisk CVS-10/13/03-11:54:33 chan_capi-0.3.0 ATA-186 V2.16.1.ms over MGCP Situation: ISDN calls ATA ISDN speaks with ATA ATA-Phone presses Flash and speaks to another one (SIP/snom200) ATA-Phone hangs up ISDN talks to SIP/snom200 snom200 hangs up The incoming extension of ATA keeps busy for a time (20 sec?), even its not off-hook anymore! Any ideas? -- Swapping

I use cisco ATA 186 ( Version: v2.16 ) with sip protocol and asterisk as pbx. I need feature called as 'three way calling' or 'transfer with consultation'. Registering,calling and 'blind transfer' work fine. Is this feature provided by sip clients or by asterisk itself ? What I have to configure in ATA and what keys I have to press on my phones ? Three way calling is

i have been trying to get a newly liberated (from vonage) cisco ata-186 (sip ios v3.1) working properly with asterisk. my client is behind a linksys wrt-54g, which up to this point hasn't proven to be a problem (i have several sipura spa-2000's and polycom phones working just fine behind them). (i'm running cvs-head from yesterday). after looking at the various suggestions,

For anyone who is interested, I have a working tftpd (modified wvtftpd) capable of serving configuration, dialplans, and ringtones to Cisco 7960/7940 and ATA-186 devices that are located behind NAT firewalls. As TFTP is not a very firewall/NAT friendly protocol, I had to break some rules to get it to work with these cisco devices. It might cause problems for other TFTP clients, but it works with

I want to setup an Asterisk network using the Cisco ATA 186. What is the best place to order those devices? I'm not finding them anywhere. Al __________________________________ Do you Yahoo!? Protect your identity with Yahoo! Mail AddressGuard http://antispam.yahoo.com/whatsnewfree

I use both ports on my cisco ata-186. I run them using ulaw. Today I made numerous calls using my analog phone on port 2. I picked it up about an hour after the last call I made and the line was dead. There is no power at all over the phoneline to the phone, and the red light doesnt light up. The configuration is verified as unchanged. Has anyone seen this problem before. I was

Calling from a Cisco FXO port to an ATA-186 (SIP 3.1 image) via * (either CVS-HEAD-06/28/04-11:43:41 or CVS-HEAD-07/12/04-15:49:58) I didn't hear any ringing sound & get the following on the console: -- Called 5503 -- SIP/5503-f6b5 is ringing WARNING[-1323201616]: channel.c:1375 ast_indicate: Unable to handle indication 3 for 'SIP/10.10.2.250-9903' -- SIP/5503-f6b5 answered

I really should be doing something better on this beautiful weekend, but I'm trying to save myself some time for later projects by documenting some things that have been particularly troublesome in the past. That being said... I've written up a configuration guide for the Cisco ATA-186, which describes some of the features that are possible to set in the ATA and specifically what

Does anybody has the expirience configuring Asterisk with Cisco ATA 186 MGCP firmware ? I have Cisco software v3.1.1 atamgcp (Build 040629A) Asterisk 1.0-RC1 On ATA i only put domain test. mgcp.conf looks like this [test] host = 192.168.195.55 context = default line => aaln/2 line => aaln/1 Asterisk CLI shows this: Jul 31 16:05:40 WARNING[135449600]: chan_mgcp.c:485

Anyone have call waiting working on the ATA-186 connected to Asterisk? Other VoIP phones seem to work, but I can not get the ATAs to allow call waiting. Christopher M Iarocci Network Admin JD Posillico 631-249-1872 X244

Are there any other codecs that can be used with the 7960 and the ATA-186? I have been using the default gsm codec and wanted to see if I could make use of something a little less bandwidth intensive. Kim Callis -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20030723/34e950e0/attachment.htm

I am trying to set up the Message Waiting Indicator (stutter tone/light) so that my cisco ata-186 will let my phones know there is a message waiting. However this does not seem to be very well documented. I found this on wiki mailboxnumber@context ... where does that go? Do I put it in my SIP.conf definition for my cisco ata, or where. In my SIP cisco definition i already have a

Hi, this is the scenario: One * is placed in a central location with more than enough up/down bandwidth. One * is placed behind a DSL 3000/384. Both * are linked via IAX trunking. Everything is fine until the upload channel of the remote site is filled with a download, then heavy voice distortion starts. Well of course this is expected. So I fooled around with HFSC QoS scheduling on the remote

The best place for Astri Con 2006 would definatly be Omaha, Nebraska! ;) very central ...ah one could hope. __________________________________ Yahoo! Mail - PC Magazine Editors' Choice 2005 http://mail.yahoo.com

I'm new to the world of linux, and I was wondering if you could help me out. There reason, I'm come over to linux, is to try and create a massive virtual drive, that I could attacth to my servers, and have them use it. Speed is not essential, but functionality is. There are not that many people logging onto the network, only about thirty, and there are no mission critical applications

Hi people, I have a Cisco ATA 186 which understands only the SCCP protocoll, therefore I am a pure beginner and I hope that anybody of you could help me. How will I configure the ATA which has 2 analog ports? For any support I would kindly thank you Tamer

Hello, I've got a Cisco ATA 186 from Vonage plugged into my Asterisk box with a X100P card. This works great for the most part, but I'm having a disconnect supervision problem. I suspect the Cisco device doesn't provide any sort of analog disconnect supervision when it gets a SIP BYE message indicating the far-end has hung up. This causes Asterisk to leave the channel up

Hi all, do you know any firmware release which fixes that issue for cisco ATA186? ATA 186 3.x.x Cisco ATA 186 v3.* CANCEL requests can be sent with a completely bogus URI, making it impossible to cancel a call. bug no workarounds This is from: http://www.communigate.com/SIP/SIPProblems.html. In other words, you make a call, other side doesn't pickup, then you hang up,