similar to: RSA question

Hi, I got my * working fine with FWD at office with 2 extensions, i receive calls and i can make calls thru FWD. I got also my * at home, and i connected it using auth=rsa. From my home, i can make calls using my office iax, but if i try to redirect incomming calls from FWD to my * at home, it rejects the call. I created the pub/key pairs for rsa and its working ok and i just pasted the

Anyone had Realtime working with IAX2 and RSA authentication to connect two PBXs, please? It seems that inkeys/outkey fields are not read at all and the following warning is logged when dialing: Jun 2 02:41:36 WARNING[6299] chan_iax2.c: I don't know how to authenticate ******** to XXX.XXX.XXX.XXX Using iax.conf it perfectly works. Maybe a bug in Realtime? TIA, Alex

Hi, I'd like to setup oneway connection - so asteriskB can place calls on asteriskA and be safely authenticated with rsa keys. I just don't get any response on asteriskA. I've generated pair of keys: name.key, name.pub and put them on both servers - is it right to only have name.key on asteriskA and name.pub on asteriskB ? I get everybody is busy ... on asteriskB, and none

Asterisk-server 1 : register => hostedasterisk:pass1 at domain2.biz [BOX-YOCAN] type=user ; incoming from YOCAN... auth=rsa inkeys=Key ; pub key of user secret=XXX ; pass2 of YOCAN context=from-BOX-YOCAN ; incoming from YOCAN trunk=yes transfer=no qualify=yes [BOX-YOCAN] type=peer ; outgoing to YOCAN... host=dynamic ; registers auth=rsa outkey=kEy ; private secret key

I'm getting exactly the same behavior as was posted about in http://lists.digium.com/pipermail/asterisk-users/2004-March/040380.html I've upgraded (both ends) to CVS stable (CVS-v1-0-06/17/05-13:15:49). Jun 17 13:46:17 NOTICE[15942]: chan_iax2.c:4053 authenticate: No way to send secret to peer 'a.b.c.d' (their methods: 4) Immediately after that, I'll see frames go by with

Hi peeps, I've been struggling with DUNDi for a few days now and I can't seem to make call from Asterisk A to Asterisk B. If I do a "dundi show peers", it finds the other peer but I can't seem to make any calls. Can anybody help me out here. Here's the situation: Machine 1: Debian with Asterisk 1.4.4 --> 192.168.1.103 Machine 2: AsteriskNOW --> 192.168.1.69 The

Asterisk 1.0.9: IAX2 registration timeout! --- I have 2 locations with ADSL lines, both with dynamic IP (+ dynamic DNS). On location 1 => Asterisk 1.0.RC2 / Slackware 10 On location 2 => Asterisk 1.0.9 / Slackware 10 They are on private network and connected via IAX2 through NAT(win2000server), and registering to DDNS name of each other. I know that Asterisk is not very smart on handling

If a call from one Asterisk box to another comes in, it always goes to the default context because it is treated as IAX guest. I don't understand why ?! Asterisk box 1 iax.conf : [BOX2] type=user auth=rsa inkeys=public_key_box2 context=from-BOX2 [BOX2] type=peer host=dynamic auth=rsa outkey=private_key_box1 Asterisk box 2 iax.conf : register => BOX2:BOX2 at IP_BOX1 [BOX1] type=user

Hi, I have two asterisk servers and I want to make these servers call each other as they were internal. I have succeeded in one way. Server B can call Server A without problem, but Server A cannot call Server B. Here's the iax configuration of servers Server A: ================== [ipek] auth=rsa context=from-internal host=XXX.XXX.XXX.XXX inkeys=ipek outkey=odtu peercontext=from-internal

Hi, I have a problem with IAX accounts... I set up a few months ago an Asterisk server, with mysql support to load iax accounts. Settings seems fine because apparently the system works as expected. Yesterday I tried to add another iax account in the iax.conf directly. And I have a problem with this new account (named 444). I can authenticate from 444 to the server, and I can receive calls from

Hi all, I'm trying to get IAX2 trunking between two * boxes and am having extreme difficulty :) What happens is when the sending * server (the one initiating the call) receives the ACCEPT back from the receiving server it immediately replies with INVAL. I've checked the code and it seems to be not matching the accept packet with the relevant item in the iaxs array due to the following

hi all, I am trunking via iax2 2 asterisk serverses if both of them have static ip addresses, I can connect them using no password, password or auth rsa with a pair of keys. If one of them has dynamic ip address and need to register on the other server, I can connect them with no password, but I am not able to do that using keys. The question is: which is the right register syntax to use when

I'vce got three Asterisk systems here that I'd like to be able to place calls between with IAX. As usual, I've spent several hours playing with it, really getting nowhere. Asterisk is so mentally draining. Each system, pbx1, pbx2, pbx3, should be able to connect to every other. Do I need separate user/peers or can I combine them into a single user=friend for each system? if I place a

Dear community, Please help. I've been looking around the internet (and in this great forum) for help with DUNDi setup between servers (I'm using Elastix) and while I can get my servers to lookup extensions on each other very well, I have not been able to successfully make calls between servers. For my test environment, I have 3 servers setup for now, and these are the steps I've

Hello, I'm french, so excuse my poor English. I'm face to a terrible thing, with has stole a lot of my time. On the .184 machine, I've the following iax.conf : [general] rtcachefriends=yes bandwidth=high tos=reliability jitterbuffer=no autokill=yes #include "iax.voip1.conf" #include "iax.renoir.conf" The iax.voip1.conf file contains : [VOIP1] type=friend

All, I have an issue with IAX that I can't comprehend. Approximately every eight minutes my servers go unreachable. They stay unreachable for exactly 10ms. I have two servers running IAX and it happens on both servers simultaneously. I have searched the archives and see similar issues, but not the exact same one. I am on the current CVS stable version of *. Also, during IAX calls,

hi all, I'm trying to set up some iax2 trunks in Realtime architecture with the same backend. All work better (make call, receive etc etc) but when I do "iax2 show peers" some asterisk don't show anything and other show the iax2 peers but with status "unknow". Name/Username Host Mask Port Status ctm1/trixbox 10.0.0.131 (S)

I'm attempting to get two Asterisk 0.4.0 PBXes to communicate with one another using IAX/IAX2 trunks. I've managed to get a semi-functional NAT Firewall working as a PBX (with Asterisk running directly on the firewall itself), but there are issues with bind()ing to various interfaces which is causing outbound SIP issues. To get around these issues, the idea is to do something like

Hello, I have two asterisk servers and I would like to merge their dialplans. I thought DUNDi would be a natural choice. I created the following configuration on the first server: iax.conf Code: [dundi] type=user dbsecret=dundi/secret context=dundi-local dundi.conf [general] ttl=4 autokill=yes cachetime=30 entityid=00:06:5B:8E:B0:08 secretpath=dundi bindaddr=XXX.XXX.XXX.XXX port=4520

In a dual server configuration one of the two servers fail with: WARNING[3705]: res_crypto.c:335 __ast_sign_bin: RSA Signature (key sintel-voip) failed NOTICE[3705]: chan_iax2.c:5187 authenticate: Unable to sign challenge withy key WARNING[3705]: chan_iax2.c:7191 socket_read: I don't know how to authenticate sintel-user to 10.27.33.1 We use the rsa authenticatio: in the server A