similar to: Have install diskette for 3.0, but can't find the .img for 4.0

I have found something called: diskboot.img at: http://www.gtlib.gatech.edu/pub/centos/4/os/i386/images/ But it is 6Mb large (6411Kb) instead of 1411Kb And the rawreadwrirewin program gets an error on it when run on NT. On Win2000, it makes a diskette that fails to boot.. So really, HELP!!!! I 'just' discovered that my old bootable diskette is for Centos 3.0, and my other CDs are

(New to CentOS and just joined the list.) Is there a boot diskette image for the install CD? I want to install CentOS in a classroom that does not have CD boot enabled. I couldn''t find one on the install CD, although it did have a USB flash drive boot image. I''m pretty sure that the machines in the classroom are too old to be able to boot from USB flash drives. (I will check on

I have some hardware vendor diagnostic utilities that I'd like to use via PXE. One example is a three diskette test suite. How can I merge all these diskettes into a single PXE bootable image? I have been using pxelinux, memdisk, and isolinux successfully for other things, so I'm a little embarrased even asking. Is there a way to PXE boot ISO images? Can syslinux support larger than 2.8MB

perhaps the boot-from-cdrom code in Smart Boot Manager? Bernd >>> No, since booting from CD-ROM requires that the El Torito part of the BIOS is activated, which it won't be if it didn't boot from CD-ROM in the first place. ---------------------------------------------------------------- Op deze e-mail zijn de volgende voorwaarden van toepassing:

I'm trying to connect to aSamba 1.9.18p10 share on my HP-UX 10.20 host, using an MS-DOS boot diskette (well, actually a Windows 95 boot diskette, but relying on the DOS-style protocol stack, etc.). When I issue the same username and password that I use to connect to that share from my Windows NT client, I get an invalid password message. Two things come to mind: is the DOS client sending my

Hi, I have HP DL 180 G6 2U Rack Server with HP Smart Array Controller Card B110i Onboard SATA Controller Chipset. This server has 4 * 500 GB SATA HDD have configured RAID 1+0 and it shows Single Logical Drive of 940 GB Hard Disk in the RAID BIOS. Have created driver diskette using dd command to enable this controller card to the CentOS 5.6 x86_64 arch and it shows HP LOGICAL VOLUME of size 940 GB

I downloaded the 'seatools for DOS' diskette creator on seagate website. it's a windows program that creates the diskette; so a floppy disk must be present in the drive. running the program is ok, but creating the diskette fails, it says "the current diskette format not valid". while the diskette is blank, vfat, mounted and linked to a: in wine; so everything seems to be ok.

Hi, I am Ken.. I am trying to add dud(driver update disk) to centos5.6 using network method, I can successfully add dud to centos5.6 using http and ftp method, but fail when using nfs method. However those all three methods are officially supported in the centos5.6. As indicated in the centos5.6 website, we can see they not only support http, ftp, but also nfs.

I am failing to get Named started. I copied my named.custom and zone files to a diskette from my 3.3 build. I installed 4.0 from scratch and did the updates. I edited /etc/named.conf (which I realize is a link) to include named.custom I cp named.custom into /etc (all of this was done while logged in as root) When I try to start named from the services GUI (using GNOME) and I get this error:

I am building a new server. It will be a temporary firewall of sorts. I am well into the config, made a lot of changes; almost ready to set it up in the target networks, but now.... The system hangs trying to start sendmail. I was thinking hard about disabling sendmail, but thought I needed it for internal functions, so did not. yet. So is there someway to get the system working so I can

I have been tied up with other work and Holidays. Now back to some server work that is long overdue. I lost an old server yesterday so it is crunch time. I believe my new platform is suppose to be an x86_64. The order form says 64 bit. I booted Centos 6.3 i386 liveCD to check the system out before an install. uname -i reports i386 dmidecode -t processor reports Characteristics of 64

I have been using the LEAF Bering firewall for a year or so. It boots with Syslinux 1.75. But Bering is too large for a 1440KB floppy, so it formats the diskette as 1680KB. Recently I found a small Compaq 2266 box to replace a larger Compaq 7170 to run the firewall. But when I try to boot the Bering diskette on the 2266 I get the following message: Loading Linux ............ Boot failed:

Changing the vapply() behavior makes sense in principle. I analyzed the CRAN code base using the R parser and found 143 instances of calling vapply with USE.NAMES=FALSE. These would need to be inspected to understand the consequences of the change. For reference: /AzureML/R/datasets.R:226 /BBmisc/R/toRangeStr.R:33 /DBI/R/DBDriver.R:205 /Kmisc/R/str_rev.R:37 /Matrix/R/diagMatrix.R:98

I've been studying some of the code and I'm still a little shakey on the proper method for returning a data.frame from a C function (which is my ultimate goal here). I've started some code that I've "stolen" from the archives and I'm running into crashes, etc. I've been trying to gleen some insight from the src/main/scan.c file and didn't find many comments in

Hi I am trying to create a boot diskette(s) that is able to mount a remote drive (on an NT server) using smbfs. I have tried doing this, but I can't fit smbd, nmbd, smbmount and smbumount all onto my root disk. What is the minimum set of files required for smbfs to work? What docs should I read to help me? I am running RedHat 6.2 (with a custom kernel v 2.2.14, ntfs and network card

HPA, is it possible to add GZ support in syslinux itself? Some standalone software compresses very well, but is not compressed. Example is the Memtest86+ binary (90KB uncompressed --> 35KB gzip'd) and maybe Smart Boot Manager (gzip'd COM32 binary instead of normal COM32 binary?). I'm using both on a simple bootdisk, and all space savings are welcome. a workaround could ofcourse

(I *really* need to learn this list is configured for replying to sender instead of the list itself..) Dinesh P. schreef: > Hi there, > I am using memdisk with pxelinux, i have created ms-dos boot disk from windows xp, but when i boot from it stops on starting.... > what is the problem can anybody tell me.. > please read Syslinux and Memdisk

A few weeks back I had tried to install CentOS on my old AMD 5x6x (equiv to P75 performance) with plans to use it as my firewall and router. Because there were some problems relating to RPM compile architecture (apparently), I posted and Bryan suggested IPCop, even at peril to his life on these lists ;-) according to him. ;-) ;-) Just wanted to tell him thanks, it's worked out well. Had

Hi, is there an easy way to circumvent the SYSLINUX novice protection thing? intended users don't know about CTRL key to circumvent it. I'm trying to make a generic bootdisk for systems of 8086 - Pentium4. however the bootdisk is slow, so I'd like to use Syslinux + Memdisk to load a diskette image. then the text displayed to user will be: 1) FreeDOS bootdisk (accelerated, 386

I have a small home network running three Win95 pcs with a Samba/Linux server (thanks, Andrew and Linus!!!). All works well. The question now is what I can do to make a full system backup (including hidden and system files) from the Win95 boxes to the 8mm tape drive on the Linux box. I know I could use smbmount to mount the Win95 drive, and then do a tar or cpio backup, but I'm not nearly