similar to: about dial parameter L

I install ser and found my ser don't support mysql. my ser version : ser-0.8.14_src.tar.gz and ser-0.8.14_linux_i386.tar.gz who can help me? thanks. Best Regards Zhao Zigang ??? Alcatel Shanghai Bell Co., LTD *:388,NingQiao Rd.,Shanghai 201206 *:086-21-50554550-7762 *:Zigang.Zhao@alcatel-sbell.com.cn

I'm trying to use Asterisk (v1.2.11) make a callback that dials both legs of the call into a Meetme() room together, but I keep getting "conf-invalid" messages. I created a callfile (/var/spool/asterisk/outgoing/out.call) that specifies a Local channel (extension) which contains a Dial() command to the "dialer", and an extension which contains a Dial() command to the

I use xlite , but it isn't support video when it is free. who used better softphone ? Thank u. Best Regards Zhao Zigang ??? Alcatel Shanghai Bell Co., LTD *:388,NingQiao Rd.,Shanghai 201206 *:086-21-50554550-7762 *:Zigang.Zhao@alcatel-sbell.com.cn

Well, it has been a long time since I used my NetJet S cards with asterisk (moved to the quad PRI card) but I am trying to get this working again for home use. Basically, what I am using is this: Linux 2.6.8.1: config lines: # ISDN subsystem CONFIG_ISDN=y # Old ISDN4Linux CONFIG_ISDN_I4L=y # CONFIG_ISDN_PPP is not set CONFIG_ISDN_AUDIO=y # CONFIG_ISDN_TTY_FAX is not set CONFIG_ISDN_DRV_HISAX=y

Hello, I just got my isdn-card working together with i4l and asterisk. Everything seems to be working fine: I can accept calls coming from the outside and I can dial out. Even setting the msn works like charm but my problem is that I cannot hear a word. There's complete silence in both directions. Any idea what could be the cause? Thanks for your help, Gunther Lspci: 0000:01:07.0 Network

Hi all: I have a quesion about ANOVA: Is SS(Sum of Square) of a specific factor constant with the number of factors changing? dat1 includes one factor g1,and g1's SS is called SS_g1_dat1. dat2 includes two factors g1,g2,and g1's SS is called SS_g1_dat2. My quesion is: Is SS_g1_dat1 equals to SS_g1_dat2? I have both "yes" and "no" reasons for the quesion,but

I posted a message a little while ago but got no response (that I can recall), I've also seen other people mention this issue. Basically, when you have music on hold, it doesn't play the music on hold, the debug info shows it is starting and then stops straight away.. # My extensions.conf ... exten => s,1,Answer exten => s,2,DigitTimeout,5 exten => s,3,ResponseTimeout,10 exten

Hi to everyone! I am new to this list and i want to greet you all! I am trying to install Asterisk on a Fedora Core 3 Distribution with a Digi Datafire Micro V ISDN Card. I know that I have to use the ISDN4Linux so in modem.conf I set the I4l driver ,the msn and device. Modem.conf [interfaces] context=remote ;driver=aopen ; modem by AOpen driver=i4l ; isdn4linux - an

Hey All, I'm still (since April) having problems getting RxFax to work over an ISDN4Linux channel. Just wondering if anyone has had any luck getting it to work? I have done a CVS update today (about half hour ago) and made sure I have the latest version of spandsp according to Steve's website (spandsp-0.0.1k). When I was compiling asterisk, I got the following warnings:

hi, i need to do a demo of asterisk in a office that doesn't have an ISDN line, can someone tell me if asterisk works also if i use a modem card mapped on /dev/ttyl0 insted of use a isdn card? did someone try to do something similar before? thanks for your help!! Angelo

Hello! Im pretty new of asterisk world: my goal would be using iaxcomm to call ppl over POTN. Yesterday i configured asterisk to be able to hear a song (with Playback() command) with iaxcomm, and it was wonderful. Now, today i tried to configure asterisk to use my ISDN4Linux supported card (a plain HFC card) with asterisk. i configured modem.conf this way, after reading

I'm trying to get a basic Asterisk configuration together for ISDN incoming / outgoing calls. I have two Cisco 7905g phones working (at least talking to each other) and have purchased a NETjet-S PCI ISDN card for routing calls to / from ISDN. The state I've managed to get it to is:- -- Executing Ringing("SIP/PHONE2-d557", "") in new stack -- Executing

Hello everybody, I have a strange comportment with oh323 and asterisk, I'start testing asterisk but with this I can't understant plesae help me ! Thanks Eltorio ---------------------------------------------------------- 1/PB: I can't dial from a H323 extensions (registered on a GNU GK) to a Modem[i4l] line ---------------------------------------------------------- Nothing happens

Currently we have problems with our asterisk server connect with an Eicon Diva 4BRI Card to a PBX. Asterisk is running in version 1.0.0 on RedHat Enterprise Linux 3AS with kernel 2.4.21-4.EL. The Diva server is running in version 7.5 Can someone help us in reolving the errors with incoming calls? When we try to call to an extension we get these messages in the CLI: -- creating pipe for

Hi all, Here another guy working with ztdummy and having problems with music. MP3Player does not work for me both from a telephone entering through a passive ISDN-adapter as well as a SIP-client in the LAN. Ztdummy works with conferences. Here are my messages. I have seen several discussion threads in the mail-archive regarding this subject, but could not find an answer. Is this something I

May anyone help me solve the problem? I use samba 2.2.2 on Solaris 8 ngnvob02 [** NONE **]/export/home/sitlb $ cd /usr/local/samba/bin ngnvob02 [** NONE **]/usr/local/samba/bin $ ./smbpasswd Old SMB password: New SMB password: Retype new SMB password: machine 127.0.0.1 rejected the tconX on the IPC$ share. Error was : = ERRSRV - ERRbadpw. Failed to change password for sitlb But I can change the

Hi, I am using Asterisk on a DSS1 ISDN-BRI with ISDN4Linux (and a Fritz Card PnP). The ISDN-BRI is in PTP-Mode (Point to Point "german: Anlagenanschluss") which is enabled within I4L with "hisaxctrl fcpcipnp0 7 1". Everything works fine except that I can not see the called number/MSN of incoming calls within Asterisk and because of this I can not route incoming calls

The card is an ASUSCOM ISDNLink PCI (passive) and the circuit is from Qwest (in the US). I will be using this circuit only for voice (I'm doing this because of the poor quality of my POTS lines). I've compiled Hisax (as a module) into my 2.4.25 kernel, and with 'modprobe hisax type=35 protocol=4 id=hisax' I get the following: Apr 7 10:34:24 dev kernel: HiSax: Linux Driver for

Hello, I am trying to use 2 netjet cards under asterisk and isdn4linux. I am having a hard time trying to get them to work in terms of dial out. Does anyone have a working config I could look at for even one card (tried that, not much luck either). When i dial out: -- Accepting AUTHENTICATED call from 172.16.11.2, requested format = 2, actual format = 2 -- Executing

I'm trying using Asterisk over an isdn line. I configured my Eicon Diva card by the hisax module and it works with the Asterisk's chan_modem (and chan_modem_i4l) driver. The problem is that I can receive calls (on /dev/ttyI0) but when I make a call I always have the line busy (on ttyI0 but even if I use an other device like ttyI1). This is a part of my consol output: --