similar to: Hewlett Packard Server support packs

Hi folks, We use CentOS 5.2 (with latest errata) 64bit on DL380 G5 and trying to install psp-8.11.rhel5.x86_64.en.tar.gz. After installing dependencies (like kernel-devel, rpm-devel, etc): # ./install811.sh Saving user-defined agent thresholds... [ Done ] Checking system for required packages... [ Done ] ./hpplduioss: error while loading shared

- UPS MGE Premium Ellipse Premium 1200 - SuSE Linux 10.0 OSS, kernel 2.6.13 smp - gcc version 4.0.2 20050901 (prerelease), glibc-2.3.5-40 - mgeups-psp-3.0.0-3, nut-2.0.2-4 - Dell Dimension 8400 with dual core Intel Xeon. 3.0GHz. lsusb shows: Bus 002 Device 003: ID 0463:ffff MGE UPS Systems UPS less /proc/bus/usb/devices shows for bus 2 device 3: T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=

Hi. : ) I was updating my unofficial Korean Ogg Vorbis FAQ, when I noticed the following: While #ext is no longer listed in the FAQ contents, http://www.vorbis.com/faq.psp#ext still exists. IMHO http://www.vorbis.com/faq.psp#stream looks a little awkward. I suggest something like: Icecast streams Ogg vorbis to playsers like XMMS, Winamp 2, and foobar2000, which are all capable of...

For my master's thesis, I am trying to cross compile programs for the PSP (PlayStation Portable) with LLVM and llvm-gcc. This is what I do: (1) compile a program and the libraries it uses (libpng etc.) with llvm-gcc (2) link the bitcode files with llvm-ld into one file (3) run "llc -march=c" on the result (4) compile the resulting C source with the PSP toolchain It seems to work

Dear List, I thought it might be useful if I wrote up my notes on getting an MGE UPS to work with NUT and openSUSE. The MGE UPS (an Ellipse 1500 USB) will work well with NUT and openSUSE 10.2, but not "out-of-the-box": there are some things you need to do: Intro. MGE have built rpms of NUT which greatly simplify installation. Merci MGE. I used the rpm's for nut-2.0.5 and the

On Mar 18, 2008, at 10:46 PM, Bruno Cardoso Lopes wrote: > Hi all, > > Last year i was mentored by Chris Lattner at GSoC and i created the > Mips back-end for LLVM. The back-end is still experimental (working > with simple benchmarks only) and this year i would like to improve it > as my GSoC proposal. Mips is still fairly used nowadays in a lot of > devices - routers,

Hi, I'm forwarding your mail to the NUT list, because of a lack of time, and also since some others (Charles) already looked at this issue IIRC (related to the development branch 'netport'). cheers, Arnaud -- Linux / Unix Expert R&D - Eaton - http://powerquality.eaton.com Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/ Debian Developer -

Kevin André wrote: > For my master's thesis, I am trying to cross compile programs for the > PSP (PlayStation Portable) with LLVM and llvm-gcc. > > This is what I do: > > (1) compile a program and the libraries it uses (libpng etc.) with llvm-gcc > (2) link the bitcode files with llvm-ld into one file > (3) run "llc -march=c" on the result > (4) compile

Hi all, Last year i was mentored by Chris Lattner at GSoC and i created the Mips back-end for LLVM. The back-end is still experimental (working with simple benchmarks only) and this year i would like to improve it as my GSoC proposal. Mips is still fairly used nowadays in a lot of devices - routers, wireless cards, PSP, PS2 - and it would be great to have a stable mips backend for LLVM. General

Hi, I recently bought a MGE protection center 500. I am running a gentoo, and I am currently trying to enable the ups handling by the os, with no success. First, I compiled and installe nut 2.0.2 (with usb support) and psp 3.0. I made ebuild for them that I will submit soon to bugs.gentoo.org. The ups is connected via usb, and lsusb confirms that the device is detected (cf end of the mail for

I'll be back one more time perhaps I found the reason of these errors Nov 13 11:09:22 mezenc upsmon[3865]: Poll UPS [mgeups at localhost] failed - Data stale it happens when daemon upsd et upsmon are started after the boot obviously, there isn't any errors when upsd and upsmon are started at boot following later ... -----Message d'origine----- De : goudard sabine Envoy? : mardi

I am debating installing CentOS on a new HP DL580 with an MSA1000 SAN. HP offers drivers that are specific to RHEL and will not install on other RH distros i.e. RH 9. Has anyone gotten the HP SupportPack to install under CentOS? Thanks! -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

On Wed, Feb 27, 2008 at 7:32 PM, Mike Stump <mrs at apple.com> wrote: > On Feb 27, 2008, at 8:38 AM, HyperQuantum wrote: > > I tried to cross-compile llvm-gcc for mips, but it crashes > > But now I'm stuck. I don't need a full cross-compiler, just generating > > LLVM code is sufficient for me. > > make -k install will install a mips cross compiler for

. I just copied all of my Paint Shop Pro 7 files from another partition into a "Paint Shop Pro 7" subdirectory within the "Program Files" directory on a new wine installation. When I run psp.exe, I got a very long list of complaints/errors similar to this one: err:module:import_dll Library MFC42.DLL (which is needed by L"C:\\Program Files\\Paint Shop Pro

Hello, I have installed mgeups (for Mge ellipse premium 500) in a Suse 10 x86_64 machine with yast2. But when I try to launch psp I receive the next error: psp: error while loading shared libraries: libgtkmm-2.4.so.1: cannot open shared object file: No such file or directory and don't start. The rpms installed are: mgeups-psp-3.0.1-3 nut-2.0.2-5 glibmm24-2.8.0-2 gtkmm24-2.8.0-2

Hi, I have installed in suse 9.3 and ellipse premium 500 usb a psp 3.0 with yast2 and versions: nut-2.0.2-4 mgeups-psp-3.0.0-3 the first time that I launch psp it seems to contact the UPS and you can make changes to the parameters and all seems ok. If you make a reboot the psp hangs up and if you try /etc/init.d/ups it fails: Starting service NUT: -> Starting UPS driver: Network UPS Tools -

On Fri, Mar 7, 2008 at 8:28 PM, Bruno Cardoso Lopes <bruno.cardoso at gmail.com> wrote: > When using mips-unknown-linux-gnu as a cross-compiler, the llvm Mips > backend is called by cc1 and with that you get llvm bytecode defined > relative to the Mips ABI. That was my intention. The PSP has a 32-bit MIPS (derived) CPU. What I don't know is if that triple is the right one

Hello, It is 3 or 4 weeks ago since, i want to set communication with my ups a MGE NOVA 1100 AVR. I do it first with manual configuration but after no success, i prefered to install mgeups-psp package to do it directly. But since when i execute psp, the attempt finish with an "No communication with UPS" error. Same is when i type: mge-shut -u root -DDDDDDDDDD /dev/ttyS0 . I unplog

I'm sure I'm doing something completely boneheaded here, but I've used this idiom (constructing an interpolation spline and using prediction from a backSpline to find an approximation profile confidence interval) many times before and haven't hit this particular problem: r2 <- c(1.04409027570601, 1.09953936543359, 1.15498845516117, 1.21043754488875,

Hi, I bought an Ellipse MAX 1100 a few months ago. First I attached it to my desktop and installed mge's personal solution pac. (a graphical interface which uses nut). It works. But I want to attach the ups to my server which runs without an x-server. I followed http://opensource.mgeups.com/install/debian.htm. Didn't work. Then I copied over the configuration files which the personal