similar to: Manager API - Call Transfer/Blind Transfer

I am using asterisk 1.4.10 and seem to be having a problem with blind transfer. This could very well be a pebkac problem but I'm not sure. A call comes in on a Zap channel and answered just find by a context that does a Goto which calls a macro (seems convoluted now that I look at it) to do some CID bookkeeping but that ultimately dials all of the phones interested in calls from the Zap

I am using Polycom 501s with asterisk 1.2.4. When transfering to call parking wih "#1" -> 700 the user is able to hear asterisk tell him what extension the call was parked on. However, when I press "transfer" -> blind -> 700 . The user is not able to hear what extension the call was parked on. It seems like the polycom is hanging up before asterisk is able to

List, Having a little trouble with the following. Let me prefix by saying I have blind transfers working from the following setup. Inbound call [from-zap] (SIP/sv0071iv) answers. Zaptel -> Asterisk -> SIP extension SIP extension then blind transfers [from-sip] --- SIP extension -> Asterisk -> Zaptel During this whole process, the original channel off the trunk (lineside T1) is

Hello, Sorry for a bit of a newbie post but we all had to start somewhere right .. I'm wondering if someone can briefly explain the difference between blind and attended transfers and why they would generate two very different CDR entries.? From my own research, it seems that transfers are both ultimately a SIP REFER and thus seeing two different CDR entries just confuses me further.

Hi, I have an odd problem when doing a blind transfer. The transfer is intiated and the transferred caller hears nothing until the timeout. I have tried setting the 'r' and the 'm' variables in the dial command. Nothing happens when I use the 'r' variable when I use the 'm' variable I briefly hear music on hold and then it stops until the timeout for no answer

Hello list, I was looking for a way to implement non-blind call transfers with *, i.e. the usual behaviour of most PBXs when pressing the flash button: - A and B are talking - A pushes flash - A is free to compose a new number - B hears music on hold - A's call is answered by C - A hangs up - B and C are in conversation As much as I can understand, * only supports blind transfers, where if

Guys, this is a weird question but has anybody disabled the blind button that appears on polycoms or know if you can disable the use of blind transfers on polycoms to make any transfer attended? Thx!

Yes, After call transfer,I don't want to be media go through Asterisk. Is it possible ? Thanks, Karun. -----Original Message----- From: asterisk-users-admin@lists.digium.com [mailto:asterisk-users-admin@lists.digium.com]On Behalf Of Dameon D. Welch-Abernathy Sent: Thursday, August 12, 2004 12:07 PM To: asterisk-users@lists.digium.com Subject: Re: [Asterisk-Users] Blind Call Transfer using

Hi, I setup an asterisk system (version 1.8.0-rc5). While using a SIP only environment I discovered a problem using blind transfer. The phones are SNOM or Aastra and are using the SIP REFER Method. The following is working: User A calls user B, B accepts the call, user A than transfers to user C The following is NOT working: User A calls user B, B accepts the call, user B than transfers to user

Hi, I have a SIP phone which does not natively support SIP transfers (REFER etc...). So far all that is possible is to enable blind transfers using the t and T arguments in Dial from the # DTMF key. The phone has an R button on it and this can be setup to either send an RFC2833 hook flash message (value 16) or a SIP INFO message which you can edit the contents of (since there seems to be

Hi I'm having 2 strange problems (or rather I am doing it wrongly!) ..need some help.I am working on trixbox 2.6 with Asterisk 1.4.22 1. I've a Queue with dynamic agents (ampextensions=deviceanduser mode in amportal.conf), some of agents when they punch in the wrong UserID - they still get logged onto the Queue as a result many of them complain that they don't receive calls on

Hi there, I have setup Asterisk with a couple of Sipura SPA-841's and Grandstream ATA's. The problem is that with both of these devices the Unattended call transfer process seems to be just like Attended but instead you hang up as soon as you have dialled the number of the party your are transferring to. The call transfer all works fine BUT as you complete your side of the transfer

Hi BK - >> The blind transfer does not work. >> >> The way we try to blind transfer a call: >> 1. answer the call >> 2. press transfer >> 3. press blind softkey -> the display shows "Blind transfer to:" and >> cursor is in the second line >> 4. enter the number -> when we enter the second digit of the number >> the

Hi List, I hope this setup must be done by our astersik users.. I am using Sipura 3000 to receive PSTN calls and forward those calls to asterisk for voice processing and after that, I am transferring call to extension through FXS port on SPA 3000. Currently, media of call is trombone through asterisk. i.e achieving blind transfers on asterisk with SPA 3000. Is it possible to stop trombone

Am 05.03.2015 um 15:09 schrieb James B. Byrne: > > On Thu, March 5, 2015 05:30, Ruben R?gels wrote: >> >> >> Am 05.03.2015 um 01:09 schrieb James B. Byrne: >>> I am trying to determine how the transfer button on the Snom-870 >>> works >>> with Asterisk. Is the ## special code employed as when it is >>> entered >>> through the

I have 15 ea Cisco 7905 phones. I have them working with my Asterisk system, but I cannot get the blind transfer button on the phone to work. I can use the transfer button to work, but I don't know how to release the call after I transfer it. When I try and blind transfer, it just hangs up the phone. * and # do not work on my Cisco phones, so I can't use Asterisk's built in

Hi We've been running asterisk 1.4.17 (deb package) in a production environment for some while now and are finally taken the plunge to update to 1.4.38 (Ubuntu servers). All of this is using the RealTime Architecture I have upgraded the asterisk version in one of our test environments and blind transferring seems to have suddenly stopped working. It was working fine under 1.4.17 So, call

On Thu, March 5, 2015 09:56, Ruben R?gels wrote: > > Hi again, > > I'm glad to hear that I provided a somehow useful answer. > > Unfortunatelly, I don't know these details. > If you wasn't lucky consulting the snom docs, maybe the snom support > can be helpful with information about the exact implementation > details. > > You also could use "sip

HI callee side blind transfer is failed in 1.8 but caller side blind transfer is succes,Transfer doing by refer method,please help me on this Nikhil

Hi, Am running 1.4.18 at the moment, and am trying to implement inline blind transfer. I have : [featuremap] blindxfer => *6 ; Blind transfer in features.conf And in extensions .conf under [globals] : DYNAMIC_FEATURES=automon#blindxfr So what am I missing ?? Have read through http://www.voip-info.org/wiki/view/Asterisk+config+features.conf Thanks,