Displaying 20 results from an estimated 10000 matches similar to: "rxgain won't always ring extension"
2005 Aug 01
0
Issue with zapata.conf "immediate" setting
I currently have two channel groups in my zapata.conf file. I would like
one group to be immediate=yes and the other immediate=no
Does not seem to matter which way I go, the first entry in overrides my
explicit setting for the second group. I am running * 1.0.9 on FC1
[trunkgroups]
;trunkgroup => 1,24
trunkgroup => 1,48,72
;spanmap => 1,1,0
spanmap => 2,1,0
spanmap => 3,1,1
2007 Sep 15
2
Astribank and caller ID from PSTN
Hello,
I've one astribank with 8 FXO unit and 8 pstn lines connected to the
astribank. When I receive calls on my ipphone I get always Unknown
callerid.
It's is possible to receive the callerid from the lines on the astribank
unit? This is my config:
[channels]
language=es
context=from-zaptel
signalling=fxs_ks
;rxwink=300
usecallerid=yes
callerid=asreceived
;cidsignalling=bell
2005 Sep 13
1
asterisk hangup detection on a pbx analog port]
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
<title></title>
</head>
<body bgcolor="#ffffff" text="#000000">
<br>
<meta content="text/html;charset=ISO-8859-1"
2007 Aug 09
2
Terrible clicking on T1
Hey All,
I have an Asterisk box connected to a Nortel Option 11C via a T1. In the
Asterisk box we have a Sangoma A101C and in the Nortel we have a TMDI
card. The Nortel is also hooked to the PSTN via a T1 on a different
NTAK09 PRI card. I've included the Zapata.conf and zaptel.conf files
below.
Our issue is that when a call is sent over the tie line between the two
systems, the audio on the
2005 Jul 21
0
Asterisk, tdm card and BT line:
I don't know if is a common problem but what I've found:
First my config:
Zaptel.conf:
defaultzone=uk
fxoks=1-2
fxsks=3-4
loadzone = uk
Zapata.conf
[channels]
language=en
context=from-pstn
usedistinctiveringdetection=no
usecallerid=yes
cidsignalling=v23
cidstart=polarity
hidecallerid=no
callwaiting=yes
usecallingpres=no
callwaitingcallerid=yes
2003 Nov 15
0
Problem with call pickup -or- what stupid mistake have I made?
For some reason, I can't get call pickup to work between Sip phones or between
Sip and Zap phones. All phones are in the same call group and pickup group
(1). The source code was downloaded and built as of today 11/15/03.
Here's what's in sip.conf:
[general]
port=5060
bindaddr=192.168.17.2
tos=lowdelay
disallow=all
allow=ulaw
context=aliens
;
; SIP Entry for sipura line 1
; This
2007 Aug 08
0
Zap Bridge Question
asterisk*CLI> show channels
Channel Location State Application(Data)
Zap/3-1 (None) Up Bridged Call(Zap/47-1)
Zap/47-1 8178062105 at from-nort Up Dial(ZAP/g1/2105||TWK)
Zap/25-1 (None) Up Bridged Call(Zap/1-1)
Zap/1-1 4999 at from-pri:2 Up Dial(Zap/g2/4999||twk)
2005 Jan 06
1
TDM400P - Segmentation fault
Hi all,
I'm trying to install a TDM400P card, and I need some help.
Please, see below...
after dmesg command:
[root@voip root]# dmesg
via82cxxx: board #1 at 0xD800, IRQ 5
Zapata Telephony Interface Registered on major 196
PCI: Found IRQ 3 for device 00:09.0
PCI: Sharing IRQ 3 with 00:10.1
Freshmaker version: 71
Freshmaker passed register test
Module 0: Installed -- AUTO FXS/DPO
Module 1:
2005 Jan 07
1
TDM400P - Segmentation fault - Help!
Hi all,
I'm trying to install a TDM400P card, and I need some help.
Please, see below...
after dmesg command:
[root@voip root]# dmesg
via82cxxx: board #1 at 0xD800, IRQ 5
Zapata Telephony Interface Registered on major 196
PCI: Found IRQ 3 for device 00:09.0
PCI: Sharing IRQ 3 with 00:10.1
Freshmaker version: 71
Freshmaker passed register test
Module 0: Installed -- AUTO FXS/DPO
Module 1:
2008 Apr 30
2
Sending caller name out PRI?
I have a PRI connected to a traditional PBX using NI-2 and a typical
config (further below). When I call from a SIP/IAX phone to an extension
on the PBX, only the number makes it through. If I plug that same port on
the PBX to a carrier the PBX presents both name and number.
Hints or pokes to relevant chapters in documentation? My config is
essentially like one found here:
2005 Mar 11
3
Droping calls
Guys, this is weird.. Today I started having some problems with calls been
dropped. Im suing X100p cards (clones) and I have this setting on my zatala
fle:
[channels]
language=sp
signalling=fxs_ks
usecallerid=yes
cidsignalling=bell
cidstart=ring
hidecallerid=no
callwaiting=yes
usecallingpres=yes
;sendcalleridafter=1
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
2004 Jun 16
0
(no subject)
Hello!
We are using the Digium 405PP card, and getting the following messages:
Jun 16 16:16:17 NOTICE[81926]: chan_zap.c:6832 pri_dchannel: PRI got event:
6 on Primary D-channel of span 1
Jun 16 16:16:17 NOTICE[81926]: chan_zap.c:6832 pri_dchannel: PRI got event:
8 on Primary D-channel of span 1
My config file is below. We are trying to set up D-Channel on channel 24,
1-23 in trunk group 1,
2004 Aug 28
5
Distinctive ring detection problem
I am trying to get distinctive ring to work on my PSTN with no luck.
I can get 2 different ring codes but it skips the context assigned...
here is my complete zapata.conf:
[channels]
signalling=fxs_ks
usecallerid=yes
rxgain=1.0
txgain=1.0
language=en
context=default
usedistinctiveringdetection=yes
dring1=134,0,0
dring2=137,0,0
dring1context=internal2
dring2context=default
2006 Apr 13
1
Ztmonitor shows RX is always on.
Details:
Asterisk 1.0.9
Zaptel 1.0
Dell P3 1ghz with X100P Clone
Location: India
This is an interesting issue where when I open up ZTMonitor, it shows the RX
as being on. It seems that Zaptel doesn't know to hang up the line so after
a couple of hours when the telecom cuts the line, everythign stops working.
Things I've tried include playing with the zaptel.conf, trying zaptel
v1.2(with
2006 Apr 14
0
Ztmonitor shows RX is always on. FIXED.
Err, stupid me. Seems like the phone is hungup, but when I start ztmonitor,
the line is picked up. I guess the line in India is pretty loud b/c the RX
bounces off the charts, changed it to (-4) and all my problems are solved.
Regards,
Min Chang
On 4/14/06, Kyle Sexton <ks@mocker.org> wrote:
>
> Have you tried putting a Hangup in your extensions.conf?
>
>
>
> On 4/13/06,
2004 Dec 30
1
Weird..bridging to Zap channel FXS instead of bridging to PSTN FXO on outgoing group
Hi All,
Channels 25-28 on a customers PBX are regular Zaptel FXO cards that
are hooked into 4 incomming phone lines. They are all in a group to do
automatic rollover for outgoing calls (if channel 25 is being used,
dial on channel 26, etc.).
Sometimes when a user is dialing a number, instead of bridging to one
of the FXO cards it goes and rings to Zap/1-1.
This doesnt occur all the time but some
2005 Feb 10
0
Asterisk 1.0.5 won't pick up incoming calls
Hi All,
I have just migrated from Asterisk 1.0.0 to Asterisk
1.0.5 and I have an X100P installed. The old asterisk
was working, but now the new version isn't picking up
any calls! However, I did notice that after
installation, I performed modprobe zaptel and modprobe
wcfxo and they worked fine, but when I executed ztcfg,
I get the following errors:
ioctl(ZT_LOADZONE) failed: Invalid
2005 Mar 12
2
Unable to create channel of type 'IAX2'
Hi all,
I'm a newbie and I have a configuration problem with Asterisk.
Seems that I'm not able to call an outbound number. I'm quite sure that it
is a configuration problem, but I'm not able to find out where is the
mistake, even reading several docs to www.voip-info.org.
I do not have a good knowledge of Asterisk, I'm not very familiar with its
configuration and I've a
2005 Jan 20
1
Weird Zaphfc - not dialling non-local numbers
Hi all,
I really hope that you guys can help, because I've been tearing my hair
out for the past 5 hours on this one.
I have a Zaphfc (BRI) card in TE mode connected to the S-Bus of a Nortel
Meridian phone system. Phone calls from the Nortel to say MSN 510 are
correctly being sent to the right SIP phone. When asterisk dials say
Zap/g2/224 (a Nortel internal extension) the call goes
2005 Aug 20
0
ZAP divert problem
I have a TDM400 running telco lines on ZAP2-4
My after hours config is supposed to receive the incoming call then
divert it to my home phone by calling out one of the other zap channels
available.
console output as such...
Starting simple switch on 'Zap/3-1'
-- Executing Dial("Zap/3-1", "ZAP/G1/0823274210") in new stack
Aug 20 19:06:44 NOTICE[646]: