similar to: SPA-841 Call Waiting

Running * CVS with a SPA-841 (0.9.5) and can't seem to get the message waiting light to come on automatically. There is a control in the web interface to turn it on and off (seems rather curious to me but whatever). Has anybody got an idea as to where I may be going awry? TIA, Paul -- Paul A. Dugas Dugas Enterprises, LLC paul@dugasenterprises.com 1711 Indian

This is probably going to sound really silly and I must be confused about it. Maybe someone can set me straight. I've been tinkering for a while with * and a number of different FXO/FXS cards, SIP phones, and ATAs trying to get a feel for what works and what doesn't. In the SIP phone group, I have a Cisco 7940G, a Polycom 500, and now an SPA-841. Each of these allow me to configure at

> Just wanted to let you know you were just left a 2236:45 long > message (number 1) in mailbox 1000 from an unknown caller, on Monday, > February 21, 2005 at 05:38:14 AM so you might want to check it when you > get a chance. Thanks! > > --Asterisk Hmmm... Call came in either via a SPA-3000 or an X100P Zaptel FXO interface. Got 2200 minutes of beep-beep-beep-...; the caller

While setting my first couple IP phones, I set their voicemail buttons to an extension that runs VoicemailMain. exten => 8500,1,Wait(1) ; voicemail exten => 8500,2,VoicemailMain ; exten => 8500,3,Hangup ; I would like to be able to pass the mailbox number allowing each phone to go in directly but I'd rather tno have

New to asterisk so please be gentle. I'm guessing I'm among a number of recent additions to the list after the article in Linux Mag. I gotta say I'm *very* intersted in the project and will be doing lots of reading shortly. A couble quick questions first... How suitable is Asterisk for use as an IVR providing callers with textual data out of a database? Can it be combined easily

One of the suggestions I got for dealing with my analog FXO woes was to look into using a Voicetronix card instead of the Digium. They're more expensive but if it worked better it may be reasonable. They indicated they were compatable with the CVS HEAD version of *. Can someone share with me their experiences with Voicetronix OpenLine and/or OpenSwitch cards with *? I'm specifically

Has anyone gotten call-waiting to function on the 4 line SPA-841? I've seen some documents that say it can do it, some say no way. If yes, can you share configs / SPA-841 settings? If no, did you work around it? I can call out just fine on all 4 lines, however, if I am on the line, another call coming in does not ring the 2nd line...it just goes to busy / VM. -Darren

Hi all, Happy Wednesday! Got a 7940G off eBay to tinker with and, per the wiki, contacted Cisco about a service contract. Being just little ol' me, they won't deal directly and blew me off (I hate dealing with Cisco, Nortel, etc as a small-business person...) Again per the wiki, I hit CDW.com and found CON-SNT-CP7960 for $9.14. Looking for support for the 7940 (not 7960), I just

Wondering if someone (Steve?) can clarify something form me. I think the recent "soho fax solution?" thread has mixed things up for me. - Is it possible to get reliable fax reception using a Zaptel FXO interface connected to a standard POTS line and a fax machine connected to station interface? - Is it possible to reliably send outboud faxes in the reverse direction?

I've been struggling with a test * install for a couple months now in a small office and am just about ready to give up on it. It's not that the system itself is a problem. I've got everything (attendant, voicemail, FXS extensions, Cisco and Polycom hard-IP phones, and 2 VOIP carriers) working except for the frigging analog FXO interfaces. These things are driving me completely mad.

Been tinkering and found Zapateller appears to be answering when I didn't expect it to. I have something like so: [incoming] exten => s,1,NoOp ;Zapateller(answer|nocallerid) exten => s,2,PrivacyManager exten => s,3,Dial(${RING},20) ... I have a 1x1 analog * installation with a couple IP phones too. I've got the FXO interface connected to the home phone line. When I get an

I've got a single IAXy installed in a little office nearby and got a call from someone on site a finew mintues ago. Apparently they couldn't make a call on that extension. They'd pick up the phone and get nothing; no dial-tone. Running "iax2 show peers" showed the unit still registered and I could ping it too. Didn't try to call it while it was doing this; sorry. The

I have an account with a IAX service provider that I'm happy with but recently I started getting rather strange reports from users. They're saying that occasionally, they'll be on a call via the provider and the outbound audio appears to slowly fade out to nothing with a bit of static during the fade. Does this ring any bells with someone? I'm going to update * on the server

I've got a context in my dialplan like so but pressing 0 doesn't seem to be working. Instead of dropping out to the "o" extension, it's just returning to the start of the direcotry app. Same with star. Anyone see where I've gone awry? [attendant] ; <snip> exten => *,1,NoOp(Attendant: Directory) exten => *,n,Directory(default,attendant,eb)

I've got hints setup for my MeetMe conferences like so: exten => _60X,hint,MeetMe:${EXTEN} and they show up in "core show hints" like so 600 at dialtone : MeetMe:600 State:Unavailable Watchers 1 _60X at dialtone : MeetMe:${EXTEN} State:Unavailable Watchers 0 I'm wondering why they're Unavailable instead of

I'm looking to purchase and deploy a bunch of hardphones for agent use. The phones will have to register with Asterisk and/or SER, depending on where the phones go. They need only one line, G729 codec, and no super fancy features. Preferrably something that is easy to provision. I would think the BudgeTone would be good, but then I've read so many people complaining about them, and some

>From what i've read i think that asterisk is suppose to generate the dialtone. But when i pickup my analog phone it seems that the Openswitch12 card is the one playng the dialtone. Im almost positive the card is playing the dialtone, can anyone confirm this? And if so how can i change the dialtone?

How long does it take to get a vanity number? I signed up for an account, pre-paid some money, and then placed a vanity number order. I did all of that around Dec. 31st 2004. They said it would take 2-10 business days. It is now Feb. 15th and still no vanity number. I've called them about a dozen times and every time they tell me to keep calling the number to check it and just wait. I'm

So I'm having trouble getting call-pickup working. Got a few different SIP phones (cisco 7940's and SPA-841s) all with pickupgroup=0 in sip.conf. I can't seem to get it working. This *is* possible from SIP phones, right? Do I need to add anything to my dial-plan? -- Paul A. Dugas Dugas Enterprises, LLC paul@dugasenterprises.com 1711 Indian Ridge Drive

Hi there, Do anyone have any experience with SIP phone that support a headset ? We have Budgetone phones but we need headsets. What would you advise ? Thanks Thibault