similar to: asterisk call flow diagrams for ser voicemail combo

Hi All, I am stuck with an issue in the Openser+Asterisk Forking. In this solution we are using Openser as the Registrar. Hence it will store all the contact bindings along with the q values for a given user, say ua1. The current setup is such that the INVITEs are sent to Asterisk by Openser and Asterisk sends out the INVITE. Now if ua1 is registered with two different contacts having

Dear ALL: My scenario lists below: Assume: UA1 with sip id "1011" And dial number to PSTN is "0939749xxx" There is no modification rule at my CISCO. (It will not change any dialed number) UA1 ==> SER ==> UA2 (SIP to SIP) UA1 ==> SER ==> Asterisk ==> CISCO 5300 ==>

Hi, We are using asterisk version 1.0.5. We have registered two UA's with asterisk. (Registration was successful) UA1 <-------> * <--------> UA2 Now, UA1 subscribes for UA2 to asterisk. asterisk sends NOTIFY to UA1 with UA2's state as open. But if UA2 gets un-registered then, asterisk is not sending NOTIFY to UA1. But when there is state change from UA2, asterisk is

Hi I have the following configuration | UA1 --|------ asterisk1 -----------------------+ UA2 --|------ asterisk2 -----------------------+ DB UA3 --|------ asterisk3 -----------------------+ UA4 --|------ asterisk4 -----------------------+ | All UA is located in the same area. A seperated PC is used as a centralized DB for storing a common dial plan, user account and register

Hi, I am trying to integrate asterisk with openser for a simple call. I am facing some issues with Asterisk. Below is the explanation: I have a UA1 sending invite to UA2 through Openser and Asterisk with the below sequence. Sequence is UA1->OpenSER->Asterisk->Openser->UA2 When Asterisk gets the INVITE, the INVITE contains two Via headers, one of the UA1 and

Dear ALL: I find a program named "asterisk_b2bua" on http://developer.berlios.de/projects/b2bua/ And I also download them(two components) and try to test it. But I have not enough knowledge about asterisk. It seems a Software PBX. Does asterisk_b2bua work? Does anybody ever try it? I have questions about my scenario. |======================> UA2

This is not really a problem just something I noticed in my testing.. When two or more Asterisk servers are connected by IAX2 trunks it does not make use of any "shortest path" type system.. (maybe this is still planned somwhere down the line, but may come in handy to those who have multi asterisk installations) Here is the setup.. UA1--- Asterisk1----[IAX2 Trunk]---Asterisk2---UA2

[Resent due to non-descriptive subject line.] Hi folks When connecting two SIP users, is there any way to stop Asterisk from sending SIP 183 Session Progress messages, either globally or per-peer? Scenario as follows: Call from UA1 to Asterisk (UA2) to UA3. UA3 sends RTP before SIP OK to Asterisk (UA2). Asterisk (UA2) detects early audio from UA3 and sends 183 Session Progress with SDP to

Hi folks When connecting two SIP users, is there any way to stop Asterisk from sending SIP 183 Session Progress messages, either globally or per-peer? Call from UA1 to Asterisk (UA2) to UA3 UA3 sends RTP before SIP OK to Asterisk (UA2) Asterisk (UA2) detects early audio from UA3 and sends 183 Session Progress with SDP to UA1. Instead I would like it to just send on the early audio, is this

Hi, I have been experimenting with NAT and Asterisk a bit now. Though I have made progress along the way, I have come across the following problem. I'll really appreciate if anyone can provide me any help or pointers. Thanks! Successful Scenario: ------------------- All sorts of NAT calls are successful with full two-way media when both end points are locally subscribed users. Problem

I have this configuration: UA1 ---> FW1 ---> Asterisk ----> FW2 --> Internet --> UA2 UA has provate address (192.168.x.x) Asterisk has public address I want to be reach somebody at the internet. My idea was that asterisk works as a Proxy. Then i would have a SIP/RTP connection between UA1 and Asterisk and an other SIP/RTP connection between Asterisk and UA2. (asterisk is

I've got the following situation where a UA is trying to call another UA via Asterisk and SER according to UA1 -> * -> SER -> UA2. Now in the event that SER generates a 404 Not Found for UA2 I would like Asterisk to return or relay or forward or whatever the 404 to UA1. Anyone know this might be able to be done (or maybe not possible at all?) Craig

Hi all, i have a little problem to understand this warning message, it's annoying and it cause a lot of spurious in the log files. Im working with this scenario: a sip outgoing trunk (Trunk-out) that support only ulaw and all calls are always routed to this. a list of sip UAs that potentially can use any codec apart g729/g723. I setup the asterisk to do as mediaproxy so directmedia=no and

Any more ideas on my below mail? If a user is registered with SER and leaves a voicemail message with asterisk (by using rewritehostport etc in ser.cfg), then how is the user supposed to listen to the message afterwards? Is there any other way other than the MWI method?? Thnaksm Aisling. ---- Original Message ---- From: ashling.odriscoll@cit.ie To: asterisk-users@lists.digium.com Subject: FW:

Hi, It seems that the "switch" parameter has a priority in the dialplan that is higher than the wildcard extensions.. This I am finding to be a problem.. My setup.. UA1--[AST1]--{IAX}--[AST2]--UA2 | | PSTN1 PSTN2 I use switch on AST1 to connect to AST2... As you can see I have PSTN connections on both and also the IAX connection is not permanent.. I

Hello all! I googled lists.digium.com and ser mailing list, but did not find any working configuration of asterisk used as voicemail for SER. This is my config if (uri==myself) { if (method=="REGISTER") { save("location"); log (1, "Registered\n"); break; };

hello all, i have a problem, and i'm tearing my hair out...any assistance is appreciated. I am trying to redirect from SER to Asterisk, both on the same machine. In 1.09 I didnt need to set up a peer for SER, just autocreatepeer=yes, and rewritehostport from SER as below, and asterisk accepted the requests without a problem. When I updated to 1.23 requests from SER to asterisk die quietly, no

Hello, everyone. I'm interested in one thing: as I know asterisk retranslates the media stream with the next way 1. Gets the frame with the UA1's codec 2. Retranslates it to slan 3. Ratranslates slan to UA2's codec 4. Send the frame It seems to me, that it follows these steps anyway, the question is: Will Asterisk retranslate the frame ua1->slin->au2, if the codecs of the 1-st

Hi, We are testing a SIP solution * + ser solution for a large implementation. All the clients are nated. When a client is dialing outside the domain (to a FWD sip account for example) all is perfect ! ;-) But ,when a call is done to a sip account, the client is ringing, then the caller can hear the nated client very well, but the nated client does'nt hear anything. RTP issue no ? I've

Hi, I'm trying to bundle the powers of Asterisk and SER. Asterisk for pabx functionalities and termination to landline/PSTN, and SER as SIP Gateway/Proxy. With my current configuration the SIP user just adds 0 as a prefix to a number, and the call will go out to PSTN over Asterisk. For this to work I added the rewritehostport() function in SER to point to the Asterisk IP (different from the