similar to: No sound with X100P (clone)

Hi, can't get X100P (fully zapata compatible clone) to work (I'm in Australia). * recognises the card and the channel (1) but has definetely some problems talking to the pots line. I set up this simple dialplan for ZAP ("incoming" context, as setup in zapata.conf, for channel 1) [incoming] exten => s,1,Answer exten => s,2,Playback(somefile) exten =>

Hi, can't get X100P (fully zapata compatible clone) to work (I'm in Australia). * recognises the card and the channel (1) but has definetely some problems talking to the pots line. I set up this simple dialplan for ZAP ("incoming" context, as setup in zapata.conf, for channel 1) [incoming] exten => s,1,Answer exten => s,2,Playback(somefile) exten =>

Hi, can't get X100P (fully zapata compatible clone) to work (I'm in Australia). * recognises the card and the channel (1) but has definetely some problems talking to the pots line. I set up this simple dialplan for ZAP ("incoming" context, as setup in zapata.conf, for channel 1) [incoming] exten => s,1,Answer exten => s,2,Playback(somefile) exten =>

Hey All, Having a bit of a problem with a Wildcard X100P card. When I try to make an outbound call using the card, it picks the line up and then only dials a single digit. I've confirmed it's only dialling a single digit by listening on a phone plugged into a parallel socket. Incoming calls work fine, it's only outbound calls I'm having a problem with. I've tried

I'm new to all this so I don't know where to look, some tips would be most appreciated. I've enabled sip debugging and everything looks fine on the client and server side. Using Linphone on the client side. GSM playback from the server console is fine. I've used Linphone to connect to a vegastream VoIP system so I know if that installed and working. I'm basically just trying

Have a problem which can't find solution to on WIKI.. Trying to get * to use UK based indication tones. i.e. british ring, dial tone, busy signal. Have changed the indications.conf file to default to UK. However this seems to have no affect. What am i missing. Am using 1.0.3 stable. Many thanks Andrew. ---------------------- indications.conf [general] country=uk [uk] description =

Hi, I am having some issues with a new server install in Singapore. Outbound calls work fine. Inbound calls are not picked up by Asterisk. Zaptel 1.2.25 and Asterisk 1.2.28 both built from source. libpri installed wctdm and zaptel load without error Jun 6 23:34:03 fs01 kernel: [211138.372933] Zapata Telephony Interface Registered on major 196 Jun 6 23:34:03 fs01 kernel: [211138.372937]

In AU we have a number of different dialtones defined for various purposes. >From indications.conf: au <ringcadance> 400,200,400,2000 au dial 413+438 au busy 425/375,0/375 au ring 413+438/400,0/200,413+438/400,0/2000 au congestion 425/375,0/375,420/375,0/375 au callwaiting 425/200,0/200,425/200,0/4400 au

Hello list, Hope you all doing fine! I've tried to use the 'alias' directive in the indications.conf file but apparently it doesn't work.... It looks like maybe this feature was removed, because old sample for the indications.conf file have example using the alias parameter, but newer samples don't have it anymore.... also I couldn't find any ticket saying this parameter

I'm trying to get the X100P card working in AU. So far I have managed to get it to handle incoming calls from the PSTN and have managed to eliminate pretty much most of the echo. My big problem is getting the outbound calls to work. When I get ZAP to dial out it won't connect and I get what I think is the Congestion signal - like a busy signal but with what appears to be a 10db

Hi Vic, I hit that same problem! My SIP phones would sound okay when I made changes to indications.conf but incoming calls in to my TE410P had their own thing going on! Have a look at the zaptel source files, there's one called zonedata.c. You'll see the au settings... replace what's there with this: { 1, "au", "Australia", { 400, 200, 400, 2000 }, { {

Hi there, I have a new asterisk working in New Zeland and everything is working well except when an incoming call to the PSTN hangs up, asterisk wont hang up the zap trunk (X100P). I have found this information: http://bugs.digium.com/bug_view_page.php?bug_id=0001474 Which discusses my problem and i have made sure that i have the latest info in the indications.conf as follows: [general]

Many thanks in advance for anyone that can offer help on the following questions: Asterisk Box Using Asterisk@Home build and updated Asterisk to v2.1 P4, 400 Mhz, 384Mb RAM, 40Gb HD 4 OEM X100P Cards Phones Grandstream GXP-2000 2 * Grandstream BT-100 HandyTone 486 Sipura SPA-3000 Questions 1) When someone calls in to one of the FXO lines, there is a 3-4 second delay before the configured

I've the following setup : sip phone -> ser (auth and routing) -> asterisk with capi isdn when I call a pstn number everything works fine, but I can't hear anything till the called answer. this is the output from a test call : -- Executing Playtones("SIP/2.7.184.61-08152880", "dial") in new stack -- Executing Dial("SIP/2.7.184.61-08152880",

Hello, I have a problem with connecting a Digium X100P card to a Brazilian analog line. Can somebody help me out with this problem? My /etc/zaptel.conf is loadzone=br defaultzone=br fxsks=1 My /etc/asterisk/indications.conf [general] country=br [br] description = Brazil ringcadance = 1000,4000 dial = 425 busy = 425/250,0/250 ring = 425/1000,0/4000 congestion =

Greetings, fellow Asterisk users! I'm having problems with Asterisk and Digium's X100P (using kewlstart) in Finland - Asterisk doesn't detect POTS hangup. I've modified indications.conf according to the Finnish specifications (well, I think I got the specs correctly :-), but still no go.. Has anybody used * in Finland? Does your * detect POTS hangup (which plays the

Hello asterisk-users, Just curious if anyone has the indications for Ireland, tried googling for it to no avail. Sean -- +---------------------------------------------------+ |VOIP= FreeWorldDial: 689482 VOIPBUSTER: thecivvie | |GPG Key http://thecivvie.fastmail.fm/thecivvie.asc | +---------------------------------------------------+ Strange things happen under the midnight sun when Men

Hi, I am using TDM400 card with 3 fxs and 1 fxo. I am struggling to detect hangup tone or disconnect supervision tone from my CO. I attached the recorded wav file which contains my telco's disconnect supervision. I am using , asterisk-1.4.33.1 dahdi-linux-complete-2.3.0.1+ 2.3.0 OS => Debian-lenny 5 users.conf ------------- [trunk_1] trunkname = pstn ; GUI

Skipped content of type multipart/alternative-------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 189 bytes Desc: This is a digitally signed message part Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20031111/8683cced/attachment.pgp

Hi, The call waiting tone is very annoying (you hear nothing while it plays the beep). I need callwaiting because of the queues (the phone has to ring as soon as you hangup) but I want to remove the beep on my dahdi channels, how can I do? Thanks, Niccol? -- http://www.linuxsystems.it