similar to: dead line (no LED) on a TDM400B?

We are using Bellsouth 8867 phones on our TDM400B FXS lines (asterisk-1.0.3). It has a "Voicemail" light, which appears to be MWI (according to the manual it works with voicemail from the telco that sends a FSK signal). The dialtone stutters when a line has voicemail, so I know that I have the mailbox setting right in zapata.conf, but the light doesn't go on. I am also getting

Another day, another apparant unexplained hardware incompatibility. I have a TE412P and a TDM400B living quite happily in a whitebox using an Intel motherboard: http://www.intel.com/design/servers/boards/se7230nh1-e/index.htm I tried to move to an IBM x3650 system. It uses a slightly newer chipset, but apparantly it's in the same family. The SE-7230 board has been EOL'd and the

I'm not having any trouble with interrupts, but here's my /proc/interrupts on Fedora Core 2 on a hyper-threading CPU and using the SMP kernel (2.6.5-1.138). I don't think I need to worry about uhci_hcd, nothing is plugged into USB, but libata is the disk driver. How do I get libata and wctdm to use different interrupts? $ cat /proc/interrupts CPU0 CPU1 0:

People on the list tend to think you can't make many cards work on a regular desktop. If you're willing to wait a couple of week I might have an answer for you. _____ From: Robert Augustyn [mailto:augustynr@yahoo.com] Sent: Saturday, December 11, 2004 7:13 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: [Asterisk-Users] Will Adtran TSU 600 work with *?

I've noticed that some callers listen to our main menu and don't press any keys. I have it set up to restart the menu a few times and eventually hang up. I'm wondering if these are wrong numbers (in that case, why don't they hang up) or they really want to speak to someone here but don't understand the menu (what's so hard about "for the operator, press

As far as I can remember I only opened sip and tftp ports for the phone. For some reason (didn't look into it too much) the call stays with sip and doesn't use RTP. The problem you describe (the call doesn't even ring on the other side) is something I had and was solved by upgrading the firmware. Checkpoint's tracker explicitly said what connection attempts were blocked and why.

I have several Linux machines some running on really old hardware and some on brand new, some run old distros (RedHat 6) and some new (FC3 or CentOS). All of them experienced power failure more then once, none of them has failed to load after a reboot. BUT, Asterisk is running your PBX. Your PBX isn't your proxy server, it isn't your web server, mail server, firewall, or whatever

Recently I put callwaiting=yes in zapata.conf because customers want to speak to the operator in person, not leave her a voicemail, when she's busy with another caller. But now she can't transfer either of the calls (which she can do when there's only a single call). The operator has an analog phone connected to a TDM400B FXS line. The calls are coming from PSTN lines connected

Check your FW-1 tracker and see if any sip packets are dropped during call initiation. I had this problem and it went away when I upgraded the BT's firmware to the latest (16). Beware, though, that people on the list claim that this firmware breaks functionality of the message button and autoanswer. I haven't checked this yet, cause I can't afford to go back a version. I prefer a

Ok, I thought the point of asterisk@home was that it automatically detected the X100P board and configured it correctly. Is this incorrect? You still need to modify /etc/zaptel files? And not just using the AMP configurator. There is no mention of this on the Asterisk@home webpage. Can anyone who has actually used ast6erisk@home confirm this one way or the other? Thanks, Dean

I have installed FC3 using the notes from lesnet http://www.voip-info.org/tiki-index.php?page=Asterisk+Fedora+Core+3 It worked very well, worked first time. My configuration consists of: (1) TDM400P w/ 2 FXS daughterboards and w/1 FXO daughterboard I use yum update to update my installation. After the update and reboot, I attempted to recompile zaptel, Zapata, libpri, asterisk. No errors,

Is there a cable length limit to use with a fxsmod (TDM400B) ? I noticed that if I use a very long cable 148 feet, I can hear some parasite : I hear the radio ! If I use a short cable, there is no problem... Thanks for help, St?phane HENRY

Hi, We have got problems mapping the homes drives of our users. We don't know how to fix it. Files: burz-nfs:/etc/samba # more /etc/krb5.conf [libdefaults] default_realm = TTDE.TRANSTEC.DE dns_lookup_realm = false dns_lookup_kdc = true default_tkt_enctypes = RC4-HMAC des-cbc-crc des-cbc-md5 default_tgs_enctypes = RC4-HMAC des-cbc-crc des-cbc-md5 clockskew = 600 [realms] TTDE.TRANSTEC.DE

I have just realized while trying to research asterisk not acking incoming calls that the tdm400b card is stamped rev H, but when I issue the zap show status command in the manager interface, it indicates Wildcard TDM400P REV E/F Board 1 Which do I believe?? -- Best Regards Greg Cirino Spam and Virus Free Email included with every email account Cirelle Enterprises Inc. 25 Indian Rock Rd

I have a Linksys PAP2. Identical setups for the two channels in both the unit and in Asterisk. In particular, both channels enable g729 and set it as the preferred codec, and have disallow=all and allow=g729 in sip.conf. If we make a call on one channel, it works (and uses g729), but if we make a call on the other channel when the first one is still connected, it fails. We have three g729

I'm rolling out an installation with snom 360s in the near future. Simple SOHO configuration, 3 FXOs hanging off a TDM400B, 4 snom 360s, a snom 200, some variant of IAX softphone, and an IAXy or Sipura 2002. I have the 360's set up to subscribe and notify for the line use lights, which works like a charm for interoffice calling (between the 360's, anyway. The IAXy, 200 and,

Hello all, As some of you might remember, there is a Sun Fire X4500 (Thumper) server that I was asked to help upgrade to modern disks. It is still in a testing phase, and the one UltraStar 3Tb currently available to the server''s owners is humming in the server, with one small partition on its tail which replaced a dead 250Gb disk earlier in to pool. The OS is still SXCE snv_117 so

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Not new: I can remember seeing DEC engineers cleaning up the contacts on memory boards for a VAX 11/782 with a pencil eraser c.1985. It's still a pretty standard first fix to reseat a card or connector. On 18/01/16 15:47, Matt Garman wrote: > That's strange, I expected the SMART test to show some issues. > Personally, I'm still

I would just like to get a refresh of the situation for Australian users. It would seem that the TE400P is currently available and is likely to acheive approval for use in Australia within the next 2 months ? (when is the end of summer?). Once this is done, it will certainly suit larger installations, but it still leaves a number of 'gaps'. Anyone with analog phone lines will need