similar to: Connecting Asterisk to a Toshiba Strata system

I love it... I buy a half a million dollars worth of Trashiba's finest ... I download Asterisk for free... I now refer to it as legacy 18 months and 300 extensions later! Anyway, I am trying to integrate my dial plans acrossed platforms. PSTN>>>CTX670>>>Asterisk The dialplan I would like to setup, 1xx,2xx,3xx,7xxx to the CTX 670 4xx,6xxx to a remote ctx100 (this is setup

Hi All, I am new to both Asterisk and PBX stuff. I have 3 Tohiba PBXs in 3 separate offices as follows, Toshiba Strata dk28 Toshiba Strata dk280 Toshiba Strata dk8 I need to install 3 Asterisk servers in these 3 locations and integrate them with each of the Toshiba PBX s. This is to give IP Phones/soft phones to the users and to route these VOIP calls through the PBX to POTS. What are the

Before I go and try to write something myself, I'm curious if anyone has a script that they're using for setting and clearing the MWI on a legacy PBX. I need to pick up a Zap channel and dial #63XXX to set the MWI, or #64XXX to clear it, where XXX is the extension number. One complication is that I've got a couple dozen extensions to handle the MWI for, and only four channels to work

> -----Original Message----- > From: Brian Roy [mailto:mister.roy@gmail.com] > I do this with a Toshiba Strata DK280. The model before the CTX. You > shouldn't have any problem doing this with the CTX either. Assuming > you don't have SMDI integration with your voicemail (you didn't state > that you did), you just need the phones to send trailing digits, and > you

We've done a direct swap of an old Amanda voicemail system with a shiney new Asterisk system (Asterisk 1.0.9). The system consists of 4 FXO ports on the * box (TDM400P), and three old Wildcards we aren't using (too buggy we found). CO lines-> Toshiba -> FXO ports on * We want to branch out a little more and use it as an auto-attendant. The first problem seems to be an asterisk

I'm posting here in case anyone else runs into this and needs some help. I'll probably update the voip-info Wiki pages on Toshiba integration in a bit. Asterisk 1.6 makes things a bit easier than what is on that page. I'm integrating an Asterisk server with a Toshiba Strata system at my office. Right now, it is driving some VoIP phones (Cisco ATAs with analog phones plugged into

Hi everyone, Been reading up on Asterisk, and very interested in learning more. I've googled and read the archives and haven't found anything definitive on support for this phone system. We have a fairly large investment in the system itself and the phones, but would love to get away from the voicemail system it forces on us. Can anyone provide any feedback on using this system with

Is there a menu tree diagram somewhere for the Voicemailmain application? I know my users will ask for one, and before I started drawing my own I thought I'd see if someone already had. --- David Brodbeck, System Administrator InterClean Equipment, Inc. 3939 Bestech Drive Suite B Ypsilanti, MI 48197 (734) 975-2967 x221 (734) 975-1646 (fax)

I have a share I can't seem to create files on, and I can't figure out why. I get "Access denied" from Windows, and the samba log shows this: [2004/07/13 10:52:26, 2] smbd/open.c:open_directory(1293) open_directory: failing create on read-only share [2004/07/13 10:52:26, 2] smbd/open.c:open_directory(1293) open_directory: failing create on read-only share The share has the

The legacy PBX I'm working with does in-band disconnect notification -- it sends a * touchtone when the line is hung up. I've been trying to get this to work with Asterisk. I added a * extension to my menu context that plays "Goodbye" and hangs up. This works fine if I manually press *, but it never triggers when I hang up and the PBX sends it. I've plugged in an analog

For some time now I've had this type of error showing up in my logs: [2004/09/16 11:52:08, 0] smbd/service.c:set_current_service(56) chdir (/export/downloads) failed I've Googled, I've looked at the source, and I still can't understand why this error appears. What's really odd is that everything seems to work fine, in spite of the error. Could someone please explain what

Hi all, I have a potential client interested in an Asterisk PBX, which will allow them to improve their virtual office services, among other things (it's a Business Centre). They currently have a Toshiba DK-40 and 19 DKT 2010-SD phones. The owner has told me that the phones are digital (not in the VoIP sense, obviously). Is anyone here familiar with this particular PBX? Any chance that it

I have recently changed jobs and I now have to administer a Toshiba DK424. I would like to integrate Asterisk with this Toshiba PBX. I am quite familiar with Asterisk but I have absolutely no idea about this Toshiba. To make matters worse the manuals for this system are missing. What I would like to do is place Asterisk in such a way that we can extend the Voicemail boxes and possibly add a few

I found some postings from Google (notably from Mark Spencer) about successful integration of a legacy Toshiba Strata system and Asterisk. I am also facing that current dilemma. The general legacy solutions that I can come up with is very easy -- either making Asterisk a "proxy" (or frontdoor) to the Toshiba system, or have it operate behind the Toshiba via regular extensions. I'm

I have googled, and wiki'ed until blue. Is it possible to put T1---*----Toshiba CTX ? I have a TE405P, with one interface programmed for the T1, I am not sure how to program the 2nd port to mimick the T1 to the Toshiba. The Zapata.conf [channels] switchtype=national context=from-pstn signalling=pri_cpe usecallerid=asreceived echocancel=yes echocancelwhenbridged=no echotraining=400

Hello, community. Several months ago Toshiba Inc. released a new communicator - "Toshiba Portege G900". All device's features are greate, but in practice things are going another way: communicator is really SLOW. Toshiba users have found that G900 is using nVidia GoForce 5500 Chip in it and it seems like it's working partially, because of an incomplete driver. We have written a

I have a Toshiba DK424 connected via T1 E&M to a TE110P card. Intermittently when a user dials a number I am getting 'getdtmf' errors on the Ast server and the calls do not go through. If they dial the number once or twice more, it works fine and I receive no DTMF problems. On another note, end users are complaining about intermittent disconnects. T1 is ESF/B8ZS - 24 chan. Other

Deat all, I am in middle of integrate Asterisk with Toshiba astrata legacy pbx. Following is my setup *Asterisk <-> Digium TE110P <-> E1 card in toshiba pbx <-> Toshiba PBX* A =============================================> B C <============================================ D Asterisk PBX and strata PBX connected using back to back E1 cross cable. Physicall connectivity

Hi all I have a pocketPC Toshiba e750 and I want to make SIP calls from it, but I didnt found any free softphones for my Toshiba. X lite's versions for pocketPC isnt free :( Did someone used before a free softphone for pocketPC? witch one? Thanks Joao Pereira www.fccn.pt

I have a toshiba multifunction device that can save to an smb share. For years its been saving to an windows server. I'm trying to move it to samba 4.x. My samba 4 is running an samba AD DC on a machine called vc1. The samba 4 file services is running on a system called srv1. I've made the share on the srv1 smb.conf and have been able to connect to it using the smbclient tool. I've