similar to: Re: Asterisk-Users Digest, Vol 6, Issue 105

I am having a major dillema here, I have been trying to get my sip phone (hard phone) to communicate with the asterisk server. Below is my configuration: sip.conf [1201] type=friend username=1201 secret=<password> mailbox=1201 host=dynamic [1202] type=friend username=1202 secret=<password> mailbox=1202 host=dynamic extensions.conf exten => 1201,1,Dial(SIP/1201,9,rt) exten =>

Hey Peoples, I just got my paws on a KE1020A Phone and all it is doing when I plug it in is: 1201 Wait Login... Sip.conf [1201] type=friend username=1201 secret=<password> host=216.254.10.183 mailbox=1201 context=intern canreinvite=yes dtmfmode=rfc2833 nat=1 register => 1201:<password>@216.254.10.183/1201 One side note, The KE1020A does not have NAT capabilities, but I am

Hi list! I'm very new in Asterisk and VoIP, and of course I have a problem... :) Well, my problem is, that Deutsche Telekom wants me to change my ISDN to VoIP... :( I must do that, since I have no alternative. Well, I have now two VoIP-phones (Thomson ST2022 and KE1020A). I can configure my two numbers by Deutsche Telekom and I got now an extra number from Messagenet.it. Now the

> I'm very new in Asterisk and VoIP, and of course I have a problem... :) > > Well, my problem is, that Deutsche Telekom wants me to change my ISDN > to VoIP... :( > I must do that, since I have no alternative. > > Well, I have now two VoIP-phones (Thomson ST2022 and KE1020A). I can > configure my two numbers by Deutsche Telekom and I got now an extra > number

> Maybe I got it... > I installed an asterisk on a VM with Ubuntu 10.04 and I got it connecting to > another Test-VM with AsteriskNOW and with an italian VoIP-provider. > The very difficult was to understand, that my phone just can manage ONE > profile at time, so I had to configure Asterisk to receive all calls from the > different providers an send them ONE profile (on my

My Cisco 7905 can't register with Asterisk (1.0.7-BRIstuffed-0.2.0-RC7k on Debian stable). It could, however, register with another installation of Asterisk and the settings on the phone (apart from the SIP proxy address) haven't changed since then. On the new Asterisk box my sip.conf contains this: [jeremy] type=friend regexten=801 allow=g729 host=dynamic secret=PASSWORD nat=yes

In the Asterisk log I see: --- [Mar 23 19:25:29] VERBOSE[4067] chan_sip.c: [Mar 23 19:25:29] <--- SIP read from UDP:198.38.7.34:5065 ---> SIP/2.0 200 OK To: <sip:16046289850 at sip.babytel.ca>;tag=sd3D4swKRc From: <sip:16046289850 at sip.babytel.ca>;tag=as07c833c5 Via: SIP/2.0/UDP 96.48.217.39:5060;branch=z9hG4bK13c68eb7;rport Call-ID:

Maybe you guys seen this question a thousand times but really I can't find a solution. So is there anybody who can give me a direction or a clue to solve my problem. I configured my dovecot as follows: protocols = imap pop3 imaps pop3s login_chroot = yes login_user = dovecot auth_verbose = yes auth default { mechanisms = plain passdb passwd { args = /etc/passwd } userdb passwd

Beste tinc-developer, Ik moet van mijn baas een aantal VPN's aanleggen en ben nu thuis bezig om te testen. Ik heb 2 computers in een thuisnetwerkje (totaal 6 computers) geinstalleerd met SuSe 7.3, daar de klanten dit ook hebben. De computers zijn verbonden met een switch. Dit is de inhoud van mijn bestanden: Op computer 1 genaamd suse met ip 192.168.0.99 netmask 255.255.255.0

On Sun, 4 Oct 2020, Matthieu Herrb wrote: > Hi, > > on OpenBSD-current I now get this when connecting to an existing > machine for which I have both ecdsa an ed25519 keys in my existing > known_hosts (but apparently ed25519 keys where added only for the name > previsously by ssh): > > Warning: the ED25519 host key for 'freedom' differs from the key for > the

Hi again all. I still haven't resolved this issue of browsing the LAN. Here are a few details: * The windows stations can see each other when the Samba server is off-line * The windows station can't see each or anything else on the network when Samba is brought on-line * Wins support is enabled * each windows station has proper Wins entries with Wins enabled * the server and stations

Basically the situation is: My main server has 2 NIC's eth0 = 10/100 card 192.168.0.101/255.255.255.192 eth1 = gbit card 192.168.0.104 samba global config on the server [global] workgroup = GBNET server string = Aries Fileserver interfaces = 192.168.0.104/255.255.255.192, 127.0.0.1 bind interfaces only = Yes null passwords = Yes socket options = TCP_NODELAY IPTOS_LOWDELAY SNDBUF=8192

I was experiencing a big delay in opening printers served from a Samba station on workstations running both Win2k and WinXP. The delay occurs whenever anything specific to the printer is opened. For example bringing up the job queue for the printer and opening the properties dialog for the printer both produce the delay. Cranking up the logging level and combing through showed the delay was

Hello People, I do hope that this is not a really old problem that everyone is totally sick of hearing; it is a pain in the neck problem for me right now. I am just a Samba user. Help will be much appreciated 8-) I have been using Mandriva 2007 Linux and have installed Mandriva 2008; Samba has stopped working as described below. What is wrong? * The hardware is a local LAN controlled by an

Hi Shimizu --- Shimizu Miki <> schrieb: > Hello, > > Doesn''t the vircual nic work at all? After the hint of Timo (http://lists.xensource.com/archives/html/xen-users/2006-05/msg00091.html) I got the virtual xen network card show up in yast. However, when I configured it, yast came up with an error message that''no driver module for the device found''

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Hi: I have a small infrastructure of network of local area, that are based on a computer, with computer and with a Point Access, with Debian Etch 4.0r1. With Shorewall 3.2.6-2. Well. Since I have two cards of network, which of which, I have left like that: Internet --> Router (217.126.221.65) --> eth1 (217.126.221.117) --> eth0 (LAN

Hi All, I have a Samba server on a system, running and i386 Centos 5.1, version samba-3.0.25b-1.el5_1.4. The server is working well, as can share files etc with any issues. However when I try to add a windows XP printer driver, I get a Signal 11 error, and the drivers don't install, and windows gives an error messages, saying that the operation could not be completed. The files are actually

Starting a new Xen setup, with off-the-shelf Wheezy, and the standard Xen packages, which turn out to be Xen 4.1 I used to just put a (network-script network-bridge) in the Xen setup, but I guess you can''t do that anymore... There are a variety of recipes to setup the network and bridging, since apparently the Xen setup doesn''t does this for you anymore. I''ve gone

Hello everyone, I have configured my Samba as AD with BIND9_DLZ as backend and trying to configure the ISC-DHCP-server to add the leases to BIND_DLZ As described in the samba wiki: https://wiki.samba.org/index.php/Configure_DHCP_to_update_DNS_records_with_B IND9 Everything is working fine so far, but I get an error message as shown below in syslog: Aug 13 14:32:28 SAMBA dhcpd[4635]:

I am running Wordpress on a CentOS 6.5 server which is behind a router. The private IP is 192.168.0.99, the public URL is X.com (name changed). I have two virtual hosts in my httpd.conf file. The second one, listed below, is for Wordpress and it is accessed with http://X.com/d4i or http://www.X.com/d4i. They work fine. Actually, not show, I have more Wordpress virtual hosts, and they are