similar to: FC2 & ztcfg - cannot find channel 2

I have had a TDM400 with 2 FXO and 2 FXS working for ages (>12 months). It has stopped working. All four green lights are still lit. I have rebuilt zaptel and asterisk and restarted but the problem persists. /sbin/ztcfg -vvvv Zaptel Configuration ====================== Channel map: Channel 01: FXO Kewlstart (Default) (Slaves: 01) Channel 02: FXO Kewlstart (Default) (Slaves: 02) Channel 03:

Hi, I'm using zaptel-1.2.22.1 with asterisk-1.2.10 and following steps to make zaptel working... OS is gentoo linux 2006.1 Hardware: --------- 0000:05:01.0 Communication controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface Subsystem: Unknown device 8085:0003 Flags: bus master, medium devsel, latency 32, IRQ 22 I/O ports at b400 Memory at ff900000

I installed TDM400P and X100P pci cards in a system running mandrake 10.1 official, kernel 2.6.8.1-12mdksmp. I can compile zaptel, libpri, asterisk and modprobe (zaptel, wcfxs, wcfxo) without errors. Except that running ztcfg and asterisk fails. [root@asterisk asterisk]# ztcfg Notice: Configuration file is /etc/zaptel.conf line 3: Unable to open master device '/dev/zap/ctl'

Of course I am not a kernel expert, so .. please be patient. I am investigating on my zaptel/zapata problem. As the main error message asterisk quits on mentions <'/dev/zap/channel': No such file or directory> I went peeking over there. [Asterisk Verbose Error Mar 13 20:43:35 WARNING[5779]: chan_zap.c:763 zt_open: Unable to open '/ dev/zap/channel': No such file or

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Greets all sorry for the posting but this one has me confused. I compiled Zaptel and am experiencing something strange. I followed the instructions on README.udevs to the tee, set permissions, etc. and I'm confused as to what gives. Zaptel compiled without a problem but no device was made.... [beta@staging ]# uname -a Linux xxx.xxx

Hi, I'm cutting my teeth setting up a home asterisk server, but having some trouble getting Zaptel to recognize a X100P clone PCI (Motorola SM56 which should work according to various wiki's). What struck me was that the "/proc/interrupts" do not include IRQ 11 as the "lpcpi -v" is reporting. Am I missing something fundamental here? Any hint is greatly

[root@server ~]# modprobe zaptel [root@server ~]# modprobe wcfxo ZT_CHANCONFIG failed on channel 1: No such device or address (6) FATAL: Error running install command for wcfxo [root@server ~]# ztcfg -vvv Zaptel Configuration ====================== Channel map: Channel 01: FXS Kewlstart (Default) (Slaves: 01) 1 channels configured. ZT_CHANCONFIG failed on channel 1: No such device or address

Hi, I am sorry if this message has been reposted, but for some reason I am having problems with posting it. I configured asterisk and zaptel modules with fedora2. I want to be able to load the zaptel wcfxo and wcfxs modules. For now I will use only the Wildcard TDM400P card. I am able to load the modules but I cant configure them using ztcfg or zttool because the tools are compiled to use the

> -----Original Message----- > From: Tzafrir Cohen [mailto:tzafrir.cohen@xorcom.com] > Sent: Wednesday, October 25, 2006 10:18 AM > To: asterisk-users@lists.digium.com > Subject: Re: [asterisk-users] Re: Meetme... No channel type registered > for'zap' > > > On Wed, Oct 25, 2006 at 10:06:02AM -0600, Douglas Garstang wrote: > > > -----Original

I've been testing * on FC3. I have everything compiled and installed. However, when I do 'modprobe wcfxo' (I have an X100P clone), I get the following in /var/log/messages: Nov 24 10:23:40 jfd wait_for_sysfs[3366]: either wait_for_sysfs (udev 039) needs an update to handle the device '/class/zaptel/zaptimer' properly (no device symlink) or the sysfs-support of your

I have decided to move on from Asterisk@Home and start compiling asterisk myself now. I got a dedicated box and put my X100P in it. I installed the server version of CentOS 4.2 (2.6.9-22.EL kernel) barebones. The box is a dell GX270 workstation with 1GB of RAM. I got a fresh copy of O'Reilly's Asterisk the future of technology and begun. I downloaded the zaptel-1.2.4.tar.gz, libpri-1.0.9,

>rom: "Jose Hernandez" <jfhernandez_01@verizon.net> >Subject: RE: [Asterisk-Users] Unable to open master device > '/dev/zap/ctl' > >If you are using udev you will get a message during compile suggesting to >read README.udev, I did not pay attention to this message. > >Anyways.. I did not get the error after creating a udev rules file in

hi there I'm trying to get asterisk going on gentoo 2005.1 I'm just getting my feet wet so I thought I would just stick with the stable portage packages. Right now that's asterisk 1.0.8 I emerge asterisk with the following make.conf file: CFLAGS="-O2 -mcpu=i686" CHOST="i386-pc-linux-gnu" CXXFLAGS="${CFLAGS}" USE="-gtk -gnome -qt -kde -dvd alsa

Hello everybody, After going through multiple posts on Internet and trying different things I can't seems get zaptel wcfxo loaded on the server correctly. I run dual P3 500 Mhz box. After reading README.udev I put a file 60-zaptel.rules /etc/udev/rules.d # Section for zaptel device KERNEL="zapctl", NAME="zap/ctl" KERNEL="zaptimer",

Just as an FYI.... I have a configuration suppestion to pass along... If you have: Fedora Core 3 Asterisk 1.0.x Digium Wildcard T100P PCI Card -------------------------------- In order to get the card to work you MUST edit /etc/udev/rules.d/50-udev.rules Goto the end of the file and add....... KERNEL="zapctl", NAME="zap/ctl" KERNEL="zaptimer",

Hi, I have been trying to figure out why the S100U is not performing very well on RH9.. Here is my thinking..( may be totally wide of the mark but here goes anyway) I remember reading somwhere that the sound system used by RH has changed... Does the S100U not depend on the sound subsystem?? So what I think is that the sound subsystem in RH9 and the S100U are not happy working together.. Does

I am getting quite frustrated today, so please bear with me. I just installed Fedora Core 4 (was running RedHat 9 with a working Asterisk) now my Fedora does not appear to be recognizing my X100P (clone) at all. Hardware browser just shows them as unknown device. driver: hisax So, of course, my zaptel drivers do not work and therefore my asterisk does not work. any help would be greatly

Hi guys, I'm hoping I've made a silly mistake here, but I've been staring at the screen for the past few hours and I can't work it out. I upgraded to 1.2.16 recently, and am having problems with zaptel. The card is detected, I get a reasonable output from ztcfg -vv, and zttool shows the installed module (TDM400) with one FXS module. But when I start asterisk, I get

Hi, I have two E100P boards connected to my PC. I wish to setup two E1-ISDN-PRI lines, the first SPAN with 15 channels and the second one with 30 channels. When I try to load zaptel modules, I get an error message: "Loading zaptel framework: Loading zaptel hardware modules: wct1xxp wcusb Running ztcfg: ZT_CHANCONFIG failed on channel 63: No such device" Follows my zaptel.conf:

Trying to setup asterisk and zaptel on a Fedora Core 3. Its all working after reading up on udev but I still get errors. [root@redhat ~]# ztcfg -vvvvv Zaptel Configuration ====================== Channel map: Channel 01: FXO Kewlstart (Default) (Slaves: 01) Channel 04: FXS Kewlstart (Default) (Slaves: 04) 2 channels configured. Notice: Configuration file is /etc/zaptel.conf line 4: Unable to