similar to: IAXy issues

Hello. I am having an issue where sometimes the cheapest provider for certain international destinations is not always reliable in completing calls. However, there is not problem once the call is made (i.e. no lag or echo or anything). The way I have it set up right now (for example) for Dar es Salaam, Tanzania is: exten => _925522XX.,1,Dial(IAX2/livevoip/011${EXTEN:1}) exten =>

This is somewhat related to my other query on the list regarding NAT traversal. I have heard many times that IAX is "NAT-transperant". I am unsure how it accomplishes this. I do know that SIP works like this: your SIP device send a request to the SIP server (usually on port 5060) with whatever command. The SIP server respends to your device's "apparent" IP and port (this

Hello. I have set up ASTCC properly, calling it like this: DeadAGI(${ACCOUNTCODE},${EXTEN}) It seems to be working correctly, but I have two questions: - Although the cards' credit seems to be maintained correctly, I cannot see the call details in astcc-admin. When I try to view information on the card, it's just blank. Any ideas? - When does the 2nd, 3rd and 4th trunk get used? I have

> Many thanks Julian. Are you looking for the pinout for a single plug 2.5mm (cellphone) headset or a dual plug 3.5mm (computer) headset? -- Nabeel Jafferali Tel: +1 (416) 628-9342 Toronto +1 (646) 225-7426 New York FWD: 46990 Email/MSN: nabeel<at>jafferali.net

Hello. I am going to be putting together my first * system using FXO/FXS interfaces. All the systems I have set up thus far have been pure VoIP setups. The system I need to set up should have 3 FXO interfaces and 1 FXS interface, as well as several SIP phones. I have noticed people complaining about Digium's TDM cards - are these isolated incidents or are these cards unreliable? I intend to

Hello. I am looking for a simple Asterisk billing solution. I expect about 50-100 users (a mix of IAX and SIP) through 3-5 outgoing providers (all IAX). I need something that can handle monthly fees and per call charges (depending on destination, obviously), and should provide a web interface for customers and administrators. Something that can tie in to one of the existing management GUIs

Before I start, I just want to say this is not necessarily a problem with ASTCC, but may be a problem the way I have set up ASTCC (and possibly the way others have set it up as well). The issue is that ASTCC tries to match the pattern *anywhere* in the called number, not necessarily only at the beginning. I have set up ASTCC Routes like this: 1800 Tollfree Trunk1 0 0 100 1416 Canada Trunk2 0 0

> http://www.mixdown.ca/~andrew/dump/threaded_email.png is what > a mailing list looks like to most people, and you can see why > replying to a message, erasing its contents and starting an > entirely new email about a different topic is frowned upon > (yours is the highlighted message). I know this is OT, but can you recommend an email program for Windows that does something like

Hello. I have an * server set up on a public IP. I have SIP clients at three different locations, all behind NATs. I have all the SIP users set up this way: [user1] type=friend username=user1 secret=password1 callerid="User 1"<101> host=dynamic qualify=yes context=outgoing All three SIP clients are configured to use STUN (using stun.fwdnet.net:3478). Furthermore, I have

Hello. I was just brainstorming for a future project and was hoping to get some creative ideas from the list. If I have multiple * servers at multiple locations all connected together with a nicely partitioned dialplan (2XX for office 1, 3XX for office 2, etc.) it's pretty straightforward to link them all using IAX and allow intra-office transfers. Further, servers at each location are

I have got my first * server set up and serving users in three different locations over the Internet. This is currently a test setup so I am experimenting with the different features of *. When I set up asterisk, I only checked out the Stable source of Asterisk from CVS, and compiled it. I did not download nor compile libpri or zaptel. Now, I have internal calling and calling through my IAX

Hello. I've set up a X100P and got it working. Now, I need to set it up so that it checks if the line is being used before attempting to make a call on it. I tried: exten => _NXXNXXXXXX,1,ChanIsAvail(Zap/1) exten => _NXXNXXXXXX,2,Dial(Zap/1/${EXTEN}) exten => _NXXNXXXXXX,102,Dial(IAX2/voipjet/${EXTEN:1}) but that only goes to 102 if another device on the * server is using the Zap

Hello, Ever since I started using Asterisk I always get this error: Jan 10 15:39:26 NOTICE[4501]: res_musiconhold.c:463 monmp3thread: Request to schedule in the past?!?! I have a dedicated system system that really runs only Asterisk: - Pentium III 500Mhz - 128MB of RAM - 10GB of Disk Space - SuSE v9.2 - MySQL - Apache (only for use with Asterisk) - NTP client for clock synch There is no X

> I would like to have all SIP phones to work on prepaid basis > and without need to dial any access number, instead I would > like to use the phone as normal dialing only the destination > number, for example 00464090510. I use the AccountCode for authentication. This is how, for example: exten => _00XX.,1,DeadAGI(astcc.agi,${ACCOUNTCODE},011${EXTEN:2}) > Once the call is

I want to block following types of numbers in my extensions.conf like the premium number in Taiwan: exten => _90204X.,1,Congestion Since I have a DID in USA, I need to block these numbers in USA, as well all emergency numbers, but still let open free (???) service numbers. Can you help me to compile such a list? bye Ronald

Anyone in the Toronto area interested in getting together to share notes and swap war stories? -- Jim Van Meggelen jim@vanmeggelen.ca -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.300 / Virus Database: 265.6.9 - Release Date: 06/01/2005

Sure would like to hear experiences using various FXO to VoIP gateways with *. It seems that any thread that has anything to do with problematic FXO interfaces goes on forever with speculation about everything under the sun. Unless there is someone out there with the engineering experience to build a better one it is a waste of time, let Digium deal with it. If the TDM400P can ever be made 99.99%

I have a whole bunch of remote devices connected to my Asterisk box, including SPA-3000s, PAP2-NAs and Cisco 7960s. The PAP2-NAs I have only rolled out recently and I am having a problem that is intermittent and inconsistent. It happens to some users but not other users on the same ISP. It happens to users in 2 different countries where the Internet setup (NAT issues) are completely different. It

Ronald, Grandstream products have a one year warrantee. If you don't have any luck with Pulver, contact us and we can probably get your phones exchanged. Please don't assume that your experience with Grandstream is typical. We sell a lot of these phones and the overwhelming majority of the purchasers are very happy with their units. The quality has improved tremendously over the last

I have a sip.conf entry for a customer's PBX (IP based authentication) that reads: [customer] type=friend context=customer host=x.x.x.x accountcode=10000 disallow=all allow=g729 When the customer makes a call to my * server, * recognizes the peer correctly. However, for some reason, the AccountCode is blank. I have a NoOp(${ACCOUNTCODE}) and the CLI shows: -- Executing