similar to: Final call for departments

I'm looking for an ISDN card that will work for me using either the i4l or capi with asterisk under Linux. I'm in the US, so I need an ISDN-U interface. Can anyone tell me if this card will work for me? http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=14922&item=6700879965&rd=1&ssPageName=WDVW There are a lot available, and for what seems to be a good price, if

I've been looking at the weather vocabulary in asterisk-sounds in CVS. I've run into a few hitches with words I can't seem to find. So far, I'm looking for 'point' (for constructing floating point numbers) and 'around' as in "high around 70" (don't I wish). Any chance of getting these? While I'm on the subject, I'd be very interested in a

Since I only seem to get questions, and no feedback, from the Wiki page, I'll ask here. There seems to be no lack of opinions here... I have a working wakeup call system on my home * system. The architecture is something I'm not perfectly happy with, though. There are two AGI scripts, written in Perl, which handle (a) scheduling, confirming, and cancelling a wakeup call, and (b) the

I just fetched today's cvs (1/30/04 11:10:31). Compiles/installs on my test machine (ASUS A7V, 900 MHZ). However, If I try to compile on my production machine (Elite K7S5A, 2.4GHz, 512MB) while * is running the zaptel and asterisk compiles seg fault. I am assuming that they will compile correctly if I bring down * and rmmod the zaptel driver. 0.7.1 compiled and is now running. Is there

I am trying to put together a list of 'departments' to request as voice prompts. I have the biggies (sales, accounting, shipping, etc...) but I want to make sure I do not miss any. If anyone anyone has some suggestions (Ha... that is like going to an NRA meeting ans asking if anybody has a gun :-) ) please forward them to me (and / or post here although, with the volume of this

I have 8 lines coming into an existing PBX system and am looking for a cost effective way to replace the existing system with Asterisk. We need some of the features in Asterisk, including its ability to support remote offices (long distance savings). At first glance this appears to require a T100P card and a channel bank, but that seems rather expensive. My estimated price on that would be

Hi Everyone, the new 3.0.4 Samba installation seems to work find except that from time to time but at least a couple of times a day one or more smbd processes start running at 20%-40% CPU each and 6 nscd processes then share the remaining CPU power. System 70%-80% users the rest 20%-30%. Load rises fast to over 4. I'm sure that each such process is just idling, but why does it engage so much

While I am still in the process of working through this here are the steps I am taking to set up each machine. 1) Since each of my servers have multiple NIC ports I bond them together (see page 34 of the Administrators Guide) first. This is best down from the physical server and not via the remote console. If you do it remotely you will then have to reconfigure the management port before

I'm having some trouble here - need some help! I've just bought a TE405p (32-bit 5V), but cannot get it working in a dell 6450. The dell has (from tech specs) "three peer PCI buses: two 64-bit buses and one 32-bit bus Expansion slots seven hot-pluggable PCI slots (two 64-bit/66 MHz, four 64-bit/33 MHz, and one 32-bit/33 MHz)" I cannot get the card working in any of the slots.

Skipped content of type multipart/alternative

Hi there I've got a rather irritating problem with my Asterisk server. Whenever someone tries to call me, the don't get the usual "ring-tone" when they wait for me to pickup the phone. I don't know if I've disabled this feature somewhere in my configuration files. Since I'm in Denmark, I've got an entry in the indications.conf file pointing to

Hello, more and more operators in Europe offer music instead of ring tunes. E.g. instead of the 400 Hz or whatever tunes, the caller will hear J-Lo, or Mozart.... Currently I will have to answer the line to do that. Is there a way to do this with asterisk? Regards, Marc -- CTO Marc Storck MS Networks SA mstorck@luxadmin.org Internet Service

Ok, starting to get cheesed off and feeling rather silly. cvs head as of 5 minutes ago. #root asterisk -vvvvvvvc works, no problem. #root safe_asterisk works no problem #root service asterisk start Starting asterisk: [ OK ] #root asterisk -r Unable to connect to remote asterisk (does /var/run/asterisk.ctl exist?) /var/run/asterisk.ctl and

We are doing this with the latest spandsp, iaxmodem and hylafax. Seems to work very well for us so far. -Jonathan > -----Original Message----- > From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users- > bounces@lists.digium.com] On Behalf Of Michael Gaudette > Sent: Tuesday, March 21, 2006 3:34 PM > To: 'Asterisk Users Mailing List - Non-Commercial

Hello all, I am trying to upgrade the firmware on my cisco 7910 without using CCM. I was told that chan skinny is possibly capable of doing that and would like to make sure. I have P00405000600 firmware which I have put in version in skinny.conf. the phone basiclaly stops at verifying load. tcpdump shows nothing happening apart from small amount of traffic to port 2000 (skinny). Does anyone

Would be nice to do both (type 2 and 3 I believe in Oftel terms), but I'd accept just our DDI if that was all I could get. Steve -----Original Message----- From: Storer, Darren [mailto:starusers@comgate.tv] Sent: 01 July 2004 09:35 To: asterisk-users@lists.digium.com Subject: RE: [Asterisk-Users] Providing Telewest in the UK with per extension outbound callerID Hi Steve,

Is there any reason why there should ever be more than 1 instance of mpg123 running on a * server? I just did an 'uptime' and noticed all 3 of my loads where over 3.00. 'top' showed 8 mpg123 processes all processing the same 3 songs (our background music). I tried to kill one of them but another one spawned in its place. Any ideas? Thanks, Matthew

Hi, I'm writing a utility that needs to smbmount various shares from servers in numerous domains (no problem, all working) and then list the contents of the directories (no problem again) and obtain the windows file owner in a textual form..... Any ideas how I can achieve the last part efficiently? I see that smbcacls can do it 1 file at a time, I really need a way of doing it

Hi, ? I'm trying to figure out what the issue is splicing Asterisk between our Telewest PRI and a GDK-186 with a PRI card. ? We're using the Digium TE405P ? Our telco provider is Telewest, and Telco directly into switch is fine. ? When I splice Asterisk in, I can make and receive calls from Asterisk extensions, I can make outbound calls from the GDK, but inbound calls do not seem to pass

On a zaptel TE410p, when a call is bridged PRI - PRI how much involvement does the processor have? We're now seeing chunks of missing audio and I can't tell whether this is due to a kernel upgrade or to a zaptel/libpri/asterisk upgrade. I'm not seeing missed interrupts (from a cat of the proc/zaptel files), any other ideas on how I could go about tracking this down? I'm