similar to: IAX cause codes

Hi, I am setting up a small call center using *. I have ZAP setup for incoming calls and IAX setup for agents. Agents login using AgentCallbackLogin. When customers call, it's getting picked up and when queue is trying to call back the agents, I am getting error. I am using CVS HEAD, and updated just now. The error is: -- Executing Answer("Zap/1-1", "") in new

Hello I have created an iax exten in my iax.conf file: [300] type=friend username=300 secret=*** context=default host=dynamic callerid="some name" <300> auth=md5 Then in my extensions.conf I have: exten => 300,1,Dial(IAX/${EXTEN},20) exten => 300,2,Hangup I can dial from iaxComm (a soft IAX client) and that works fine. But when I try to dial 300 get: WARNING[22077]:

Hi All - Well, after happily existing in a one office environment with asterisk for a few months, I've now decided to start adding in our other offices with their own * boxes and IAX connections (over VPN). Unfortunately, I'm an idiot and I can't get it to work. I'm having some kind of problem with codecs, I guess, but I don't understand what or why. When trying to use

I have been running af Asterisk server Version 0.7.2 for a while now But I I wanted to upgrade my version to the new 0.9.0 or the CVS 1.0 Stable. But when I install one of the new asterisk servers I having lots of troubles with the IAX connection between my servers. When I start the 0.7.2 asterisk server it shows me something lige this == Parsing '/etc/asterisk/iax.conf': Found ==

I have two * boxes running two differnet versions of *. Box A is running: Asterisk CVS-HEAD-07/14/04-16:28:29 built by root@asterick.dell.cpu.com on a i686 running Linux Box B is running: Asterisk 1.0.3 built by root@dell.cpu.net on a i386 running FreeBSD I can make a IAX call from B to A but not from A to B. When I try to make a call from A to B I get these messages: Feb 21 12:48:12

Please can someone help me with the following two error messages: Error 1. I have loaded the Zaptel dirvers and everything is ok with ztcfg. I have configured Zapata.conf and everthing looks good but it apears the Zap channels dont load when starting Asterisk. When I make a call to one of the fxs port I get the following error message. -- Executing Dial("SIP/39-b204",

what is the best way to have 2 asterisk servers communicate with each other?

I constantly get the following error messages in /var/log/asterisk/messages: Dec 8 10:52:57 WARNING[1009521664]: File chan_iax.c, Line 3324 (iax_ack_registry): Received unsolicited registry ack from '192.168.0.1' Dec 8 10:52:57 WARNING[1009521664]: File chan_iax.c, Line 4181 (socket_read): Registration failure Where 192.168.0.1 is another asterisk server. Below are the local and

HI, I tried to configure Asterisk 1.8 on one of my test-hosts. I've installed from centos-asterisk.repo (http://packages.asterisk.org/centos/$releasever/tested/$basearch/): Nov 26 15:34:56 Installed: asterisk-sounds-core-en-gsm-1.4.20-1_centos5.noarch Nov 26 15:34:59 Installed: asterisk18-core-1.8.0-1_centos5.i386 Nov 26 15:35:02 Installed: asterisk18-voicemail-1.8.0-1_centos5.i386 Nov 26

I didn't know how else to caption this. I'm trying to play around with codec pass-through. I have two SIP phones, both with g729, behind two Asterisk servers. I set all the configs, SIP and IAX, to "disallow=all; allow=g729" on both servers. But the originating server won't even try to call the destination server: -- Executing Dial("SIP/btel-c7d7",

Ok I upgraded tonight a server from CVS in Late NOV to one just downloaded tonight. It all runs up OK and I can contact it from my ATA 186 using g729a codec and that all works fine. What I am having trouble with is connecting through IAX ATP.org.au in AUS to my server. The connection comes through OK I can see all the tracking info in the console OK but I get 0 audio in either direction.

Hi all, I have developed a full featured Windows IAX phone based on LIBIAX library . It is now in a prerelease version (0.9.0) and you can download it for free from my web page: http://www.laser.com/dante or http://www.geocities.com/tdanro Some of the features are: - registering with Asterisk PBX; - can use any audio device as ring device (including PC speaker), independent of the play device;

I'm attempting to get two Asterisk 0.4.0 PBXes to communicate with one another using IAX/IAX2 trunks. I've managed to get a semi-functional NAT Firewall working as a PBX (with Asterisk running directly on the firewall itself), but there are issues with bind()ing to various interfaces which is causing outbound SIP issues. To get around these issues, the idea is to do something like

I have successfully configured two servers and I am now trying to connect via iax. When I attempt to call from one ext, 2006(server viop1) to extension 3006 (server voip2) I receive a timeout or "call failed 403 forbidden. The information I am receiving from the console is below. Apr 26 10:53:32 WARNING[311313]: channel.c:1745 ast_request: No channel type registered for 'IAX'

All, I have spent the last couple of days looking through the mail archives and the documentation on the Wiki, but have not been able to find a solution to the problem. The version of code I am running is from CVS as of 6/30/04. What happens is that when I make an IAX call to another IAX client the caller receives a really bad echo. All of the documentation I found around using

How do I do this 1) ZAP-> * -> IAX(1) ------> IAX(2) -----> DG104S ------> Handset 2) No Answer on Handset 3) Back to IAX(1) 4) IAX(1) tries a cell phone 5) Still no Answer 6) Local * Voicemail. I have 1 working, and I had 4 working when there was only one box, i.e. when the handset did not answer the DG, asterisk went to the next step. Now that I have step 1 going to another

Hi All, I am looking for a provider/s of inbound DID - IAX numbers, for UK, USA, and Australia. Preferably free or low cost :-) Can anyone make a good reference? Many thanks Chris PS: I appreciate this is perhaps a little OT, please feel free to reply off list. -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi All! I have two [*]s, and both work OK as a simple local PBX. Now, I try to link them using IAX. Let's call those babies a1 and a2. From a1, I want to dial a phone connected to a2. Both boxes have a fixed IP address, and use standard port 5036, say a1.mystrx.com and a2.mystrx.com. Where I (obviously) get confused, is when it comes to inbound, outbound, registration, etc. Taking a hint

Good morning, I am trying to use the Windows iax client. My iax.conf looks like this: [general] port=5036 bindaddr=10.1.3.111 bandwidth=high allow=gsm ; Always allow GSM, it's cool :) tos=lowdelay [pos| type=friend context=default auth=plaintext secret=pos deny=0.0.0.0/0.0.0.0 permit=10.1.3.0/255.255.255.0 host=dynamic defaultip=10.1.3.2 In the registrations dialog

hi, I use IAX softphone with asterisk and I notice that a call between two IAX softphones end after 1 min. Then I can't hear anything but the call still in progress. I have this log in asterisk IAX debug: Rx-Frame Retry[No] -- OSeqno: 002 ISeqno: 002 Type: IAX Subclass: ACK Timestamp: 00016ms SCall: 21589 DCall: 00001 [192.168.1.22:4569] Tx-Frame Retry[000] --