similar to: One-way audio in incoming calls with Asterisk + OpenGK + Innovaphone IP3000

Hello everybody, I?ve been trying to solve a problem for several weeks now but it really beats me. There are several hard phones connected to an Innovaphone 3000 VoIP gateway. On the other side I have a SIP softphone connected to Asterisk. The problem I have is that on incoming calls (hardphones to softphone) I only have outgoing audio (from soft to hardphone); everything is OK when I call the

* compiled from cvs, i am trying call ip phones in callmanager 3.2 10.17.0.2 is my callmanager i noticed from network dumps that instead of sending rtp to the ip phone, * sends it to 10.17.0.2! thereby causing no audio from * to ip phone. audio from ip phone to * is ok. only callmanager calls fail. netmeeting works ok... here is the debug, thanks for any info ~kelvin H323 debug enabled --

Hello, when using BLF with Asterisk 1.6, I notice that the Caller-ID information is not displayed on the monitoring key of my Innovaphone IP200A. If the IP-phone of my colleague rings, I should see on my partner key the number of the caller. This is information that is being send in the xml-body of the NOTIFY-message. I do not see this information in the xml-body of a NOTICE-message from

Hello, I think I have the same problem as Martin Bene mentioned in http://lists.digium.com/pipermail/asterisk-users/2004-January/034521.html Since I found no further information about this I'd like to ask wether you know what the reason for this problem is and how one can get around this. * is registered to the innovaphone gatekeeper. Trunk connection is done with an AVM-B1 and chan_capi.

Hi all, I have VOIP network built with MGCP endpoints.The manufacturer of endpoints is ASKEY. I downloaded latest Asterisk software and found it very useful for me. I configured it and it seems taht everything works OK when I am testing it with one or two endpoints. After that I tried to move Asterisk to working network and replace existing call manager. It starts working and calls are

Hi all: I've got some core dumps when I use chan_h323. I dial an extension using h323, routed thru an E100P (like a H323-ISDN_PRI gateway). Sometimes * hangs, sometimes not. The client used for test es SjPhone (http://www.sjlabs.com/). This is the data for one core dump: (gdb) bt #0 ast_rtp_get_us (rtp=0x0, us=0x5074759c) at rtp.c:790 #1 0x41f8879c in create_connection

Hi, My configuration is SipPhone<-->*1<--->*2. My asterisk version is 1.4beta3. I installed pwlib,openh323,chan_h323. When i call from SipPhone--(SIP)-->asterisk1---(H323)-->asterisk2, there is no audio. Using 'rtp debug', I can see that rtp packets are being received. Rtp packets are being exchanged. I also tested chan_ooh323, but to fail. Can anyone recommand best

Hi all, I am using chan_h323 from Asterisk CVS to interconnect with GNUGK v2.2.2. Then I made call from a H323 EP, thru GNUGK, to SIP EP on Asterisk. However, I only heard ringing when the call was answered on SIP side. Below is the debug from chan_h323. Any help is welcome. Thanks. *CLI> == New H.323 Connection created. -- Setting up Call -- Call token:

Current setup: Polycom IP3000 <-> gnugk <-> asterisk <-> Cisco 7940 Asterisk and gnugk are on 10.20.98.6 IP3000 is H.323, using G.711 (10.20.98.2) 7940 is SIP, using g711ulaw (10.20.98.3) I've been asterisk for a while now, only using SIP devices. I'm happy with that side of things, but I've not used H.323 before this week, in trying to get the IP3000 to work. *

Hi, I'm trying to get h323 communication working between asterisk (0.7.1) and Innovaphone Gatekeeper + innovaphone phones. chan_323 installed OK with currently recommended pwlib_1.5.2 and openh323_1.12.2. Registration asterisk with the gatekeeper works OK, externsion for my test(sip) phone gets registered with gatekeeper. when establishing a call between a h323 phone and asterisk I run into

Hi All. I'm using RedHat 9 I configured the chan_h323 and asterisk from CVS. This is the scenario SJ_lab_phone(sip) ---------------> Asterisk -------------> H323 GK --------------> PSTN I have tried all codec's and always the same result, the called phone will ring without dropping for how ever I allow it to but as soon as it is answered it immediately gets disconnected.

Hi all, I'm setting up an IVR using Asterisk. Is there a way to have two streams played to the caller at the same time: for instance, one constant flow of background music, and the IVR contents at the same time? I've looked for solutions using (E)AGI and other things but nothing seems to work. Googling around and reading the list has not been helpful either... Thanks for your help,

Hi - We have a couple of large spaces that we'd like to cover with dedicated conference units like the Polycom Soundstation IP3000. We're concerned about adequately covering the spaces, though, one of which is very long and narrow. I wanted to get external add-on microphones for the IP3000, but I've found that unlike some of their other conference products, it does not have this

Hi all, I've been pulling my hair out for two days over this problem... I did *a lot* of Googling around, I searched the list archives to no avail - no one has the same problem! I have two Avaya 4610sw phones. I installed the latest SIP firmware using the TFTP server. So far everything looks good. Each time the phone boots, it retrieves the 46xxsettings.txt from the TFTP server. My problem

Hello all, Please forgive me if this sounds a little (or a lot) ignorant as I am very new to asterisk. Right now I have two pc's connected back to back through an E100 card running asterisk. I have openh323 running as well and I am able to route calls through the E1 line. Next up I would like to be able to register asterisk with a gatekeeper. On another computer is running openGK. Using

Hello, I have a strange h323 issue. After executing command "Dial("SIP/333-0d1dfe00", "H323/361737052390920 at ccg|5|tT")" at Oct 18 22:32:23. Meanwile I have sniffing traffic on port 1720. The call was established just at Oct 18 22:33:03 (New H.323 Connection created.) and also packet sniffer grabs the h323 invites at this time also. So my question is what

Okay, it's 15 minutes late, but it's out, thanks very much to all the people who worked so hard this weekend to make this possible! Mark p.s. there was no 0.6.0 release.

I have asterisk connected to E1 interface with Digium TE110P. I have Cisco ATA 186 and fax pass thru well. I have tried to establish modem connection (from computer connected to ATA => SIP => * => E1 => Telco => pstn => another modem) and I do connect (at 14,400) but connection end after a minute. How to establish successfully modem connection? Has anybody tried innovaphone IP21

>Date: Sat, 11 Oct 2003 22:07:49 -0700 >To: asterisk-users@lists.digium.com >From: John Todd <jtodd@loligo.com> >Subject: RE: [Asterisk-Users] SIP / IAX over satellite > >[post re-ordered chronologically] > >>-----Original Message----- >>From: asterisk-users-admin@lists.digium.com >>[mailto:asterisk-users-admin@lists.digium.com] On Behalf Of Tilghman

Hi all, I have thoroughly read the available documentation and I can't seem to find a workaround for my setup... I'm trying to create a phone conference line that users would call using a unique phone number (no matter if they are moderators or just plain users). I use Asterisk 1.2.6 The available conferences are defined as follows: conf => 1000,user pin1, moderator pin1 conf =>