similar to: Out of G.729 Decoder Licenses!

Hi I seem to have installed the G729 codec properly but can't seem to get it to work .. in the Asterisk startup I see .. [codec_g729b.so] => (Annex B (floating point) G.729/PCM16 Codec Translator) == Detected 1 licensed G.729 transcoders WARNING[1074408160]: File translate.c, Line 218 (calc_cost): Translator 'g729tolinb' does not produce sample frames. == Registered translator

how to make g.729 preferred, but failover to gsm I've purchased a few g.729 licences, and would like to set up iax.conf such that g.729 is used if they are available, but then it fails over to gsm. I'm not sure how to specify such a preference. I'll let the server transcode from ulaw (from the sip phones) to g.729. Got plenty of CPU for the number of phones we run off that

I am having some problems with g729 with SIP and ZAP channels. 1) I have two g729 licences. Very frequetnly (I don?t know what triggers the error) I get the following warnings and error when I try to place a call via SIP to my X100P. The only way to get out of this is through a restart of *. When the error ocurrs there are no other calls in place. Any ideas? Error Opening channel:2 not

Hi all, I am currently running asterisk (CVS HEAD) on a p4 machine with rh7.3 and using nufone's h323 channel driver. I was using the old voiceage g729 and have replaced it with the digiums g729. I used to have the message "Measured length exceeds frame length" but since I changed the g729 codec I have not encountered this problem. However, another peculiar problem has cropped

Hello, I've recently installed Asterisk@home, i'm following step by step the "new user guide" but I cannot get my X-Lite SIP phone see my asterisk@home proxy... I've installed in a viertual machine (vmware) and there's some problems with the Zaptel service and I think that this is why I cannot connect. Thanks in advance. Fabrizzio Valencia -------------- next part

hi , when i am compiling Intel G729 codec with Patch, i got this error. but i followed all the instraction and successfully patch those file. i saw some has the same error before in this forum and they solved it. but i cant find the patch file they gave. can some one help me to fix this error? thanks atik In file included from ./vm/include/vm_types.h:17, from

I have a TDM400P with one FXS and one FXO.. how many liscence(2) I will have to buy? Thanks

Hi, ALL: I install IPP(l_ipp_ia32_itanium_p_4_1_2.tar) and download the speech codeing (l_ipp-sample-speech-coding_p_4.1.008.tgz) then patch it (g729-041103.diff). My CPU is Centaur VIA Nehemiah with 998.715 MHz processor not INTEL CPU. I choose PIII as its CPU type when I modify Makefile under "G729-float". # For PIII OPTIMIZE= -O6 -mcpu=pentium3 -march=pentium3 -ffast-math

Hello, Would you please suggest me, where can I buy g723.1 liscence in cheap. I might need a liscence for 10-50 channels. Thanks,

Hi all, I am currently running asterisk (CVS HEAD) on a p4 machine with rh7.3 and using nufone's h323 channel driver. I was using the old voiceage g729 and have replaced it with the digiums g729. I used to have the message "Measured length exceeds frame length" but since I changed the g729 codec I have not encountered this problem. However, another peculiar problem has cropped

Hi all, I am currently running asterisk (CVS HEAD) on a p4 machine with rh7.3 and using nufone's h323 channel driver. I was using the old voiceage g729 and have replaced it with the digiums g729. I used to have the message "Measured length exceeds frame length" but since I changed the g729 codec I have not encountered this problem. However, another peculiar problem has cropped

pbx18*CLI> module load codec_g729-ast14-gcc4-glibc-pentium3.so Unable to load module codec_g729-ast14-gcc4-glibc-pentium3.so Command 'module load codec_g729-ast14-gcc4-glibc-pentium3.so ' failed. [Dec 22 15:52:45] WARNING[4491]: loader.c:757 inspect_module: Module 'codec_g729-ast14-gcc4-glibc-pentium3.so' does not provide a license key. [Dec 22 15:52:45] WARNING[4491]:

I expropriated the right to rip Daniel's disclamer for use in my email too.. DISCLAIMER: You might have to pay royalty fees to the G.729 patent holders for using their algorithm. For easier testing I prepared codec_g729.so binaries and associated libraries and put them on the web: http://kvin.lv/pub/Linux/Asterisk/ arkadi.

Anyone who is smart enough to be on this list is smart enough to get some proper virus protection. However it may be the case that some cannot afford commercial liscenses and/or are not aware of the free virus checkers that are available. Since this *is* a list issue, I don't feel that it is off topic to ask for folks to publish various means for such. I did notice that some were

Hi All, I have been trying to get the Solaris version of the G729 codec to work with asterisk 1.2.17 and 1.2.22. However, I come up against the very same error every time I try to install it. Has anyone out there seen this error, taken from the asterisk console straight from startup: [codec_g729a.so] => (Annex A/B (floating point) G.729 Codec (optimized for i386)) Jul 19 14:11:23

I am trying to create a %100 g729 (with no transcoding) system (using a Soekris, of course). I am running AstLinux with the native sounds, g729 is the only codec allowed, %100 SIP (g729 only allow=) - I think I am covering all of my bases. I have only "format=g729" in voicemail.conf. On an incoming call to a mailbox, everything goes well until recording the message. When the

Humm... should the list would be magic again? I have just intsalled, using the register, benchmark and downloared the correct codec to my asterisk installation, but I don't have the g729 command at my CLI... Any advice... Do I reboot? ;D

Greetings, The software G.729 codec module from Digium has been updated for all platforms. There are x86_32 and x86_64 versions optimized for specific processors available for both Asterisk 1.6 and 1.4 for the following platforms. * Linux * Solaris 10 * FreeBSD 7.0 * FreeBSD 6.1 Changes: * For Asterisk trunk / 1.6, builds have been updated for CLI API changes. * All non-Linux

Greetings, The software G.729 codec module from Digium has been updated for all platforms. There are x86_32 and x86_64 versions optimized for specific processors available for both Asterisk 1.6 and 1.4 for the following platforms. * Linux * Solaris 10 * FreeBSD 7.0 * FreeBSD 6.1 Changes: * For Asterisk trunk / 1.6, builds have been updated for CLI API changes. * All non-Linux

List, Anybody have success with Digium's G729 codec and asterisk 1.6.0? Reading http://www.russellbryant.net/blog/index.php/2008/03/05/codec_g729-v34-builds-now-available/ is seems they are build for 1.6 and trunk. But all I could find / use is 1.4 builds from http://downloads.digium.com/pub/telephony/codec_g729/ Thoughts? PB