Displaying 20 results from an estimated 9000 matches similar to: "Grouping SIP channels (Sipura 3000)"
2005 May 30
2
Sipura 3000 dialing "noise"
Hi all,
We have several sipura 3000's working well for outbound calls, however
the issue we have is that when calls are sent to the Sipura with
Dial(SIP/${EXTEN:0}@sipura1) the Sipura does a SIP answer immediately
and then proceeds with the call "in band" therefore sending dialing
sounds back to the caller. Other SIP gateways we have notably the
Vegastream and others do not do a SIP
2005 Aug 12
2
Remotely rebooting Sipura SPA-3000 from command line
Hi all,
Anyone able to remotely reboot their password protected Sipura
SPA-3000 from command line. I am trying:
Sipura SPA-3000 from command line:
# wget http://admin:mypassword@192.168.1.55/admin/reboot
The strange thing is it works fine when I go to
http://admin:mypassword@192.168.1.55/admin/reboot with my web
browser...
Thanks....
2005 Feb 04
2
AU caller ID with Sipura SPA-3000
Hi All,
I am using a Sipura SPA-3000 as an FXO gateway to bring calls in and
out of Asterisk. I am using "PSTN Ring Thru Line 1" (on the "PSTN
Line" tab) so Asterisk answers the call rather than the SPA-3000. It
is all working perfectly except I can't get the SPA-3000 to pass
caller ID to Asterisk. It passes "Display Name", "User ID" and any
"PSTN
2005 Jun 16
2
Multiple Sipura 3000
If I have multiple Sipura 3000 device how can I dial out properly? I
can receive call without any problem and that's working really well.
Caller ID is shown and when someone call he get's the welcome message
the same way I have it configure with the X100P card. I don't seem to
have any echo problem with the Sipura 3000 (but I do with X100P cards)
My main concern is for
2005 May 31
1
Sipura 3000 - fax passthrough?
I have installed two Sipura 3000's on my office pbx as a test, they work
well an have some great features including fax detect, but I was hoping to
allow incoming faxes on the FXO port to be detected and passed through to
the FXS port. Am I mistaken or does this work, and how?
Chris Mason
Anguilla
2005 Jun 19
1
*67 with Sipura 3000
How can I dial *67 on a Sipura 3000 if I dial from a SIP phone
connected on an asterisk server. I always get a message saying that
authentication failed for INVITE for sip221@192.168.1.6. If I dial a
number without doing *67 it's working fine...
sip 221 being the extension of my Cisco phone and 192.168.1.6 being
the IP of my asterisk server...
I have my outgoing context configure
2006 Feb 28
2
Sipura SPA-3000 and PSTN dtmf
Greetings,
What is the recommended settings for using SPA-3000's FXO port for
dialing out to PSTN in regard of the DTMF?
The voip lan contains SPA-2100 and SPA-3000, with all fxs/fxo ports
registered to the Asterisk box with unique username/passwords.
The inbound PSTN DTMF works excellently, e.g. people calling from PSTN
into the * box are able to pick IVR items with DTMF reliably.
The
2005 Mar 13
2
Sipura 841 issues
Hi
Just 2 issues I have with SPA841.
1. I autodial extension 600 then inside an AGI wait for more digits.
The digits are transmitted correctly to * but they do not show up on the
SPA841 display, only the 600. How do I set the 841 is show the digits
after the 600#
2. Is the SPA841 pixel display backlit?
Master
2006 Jan 23
3
SPA-3000 - the party's over :-(
The party's over folks, the new official cisco/linksys/sipura policy is to
no longer sell SPA-3000's to end users.
Buy them while you still can :-(
-Dan
2004 Oct 01
5
OT: Opensource "Sipura Profile Compiler" for SPA2K, 3K
Hello list,
I have several SPA-2000's and 3000's scattered about the Internet (all
behind NATs). Because I do not qualify as an ITSP, Sipura will not
license their "Sipura Profile Compiler" so that I can have the units
remote upgrade, remote re-configure, etc (via TFTP or HTTP). This is
extremely annoying.
Right now if I have to make a config change to any of these
2005 Mar 27
6
Sipura 2000 x dual g729 channels x other choices?
I found a thread [1] last month about the poor/crappy g729 quality on
Sipura units. Anyone noticed an improvement or the quality is still poor?
If the Sipura firmware/g729 offers no quality yet, who else is offering
a dual channel g729 ATA? I heard about Uniden, but I have no "reports"
about their ATA...
[1] Sipura g729 call quality to PSTN
2004 Sep 30
3
Sipura-3000 - silent dial out on FXO port
I am trying to configure the FXO port on a Sipura-3000 for use with Asterisk.
When I connect to the Sipura to dial out on the PSTN line connected to
the Sipura's FXO port, it gives me the dialtone of the PSTN line and
then I can hear the DTMF for the number I dialled beforehand.
It does work but the customer perceives this delayed second DTMF
feedback as "unprofessional" and the
2005 Mar 22
4
OT: does Sipura SPA 3000 support UK caller id?
Hi,
the topic says it all really.
Does the Sipura 3000 detect and report UK clid correctly?
thanks
Mike
2004 Oct 01
2
Sipura 3000 FXO
Does anyone have a Sipura 3k running, and using the FXO? I've got things
working right, but if I try to toss a *67 in the dialplan, it seems the
sipura is throwing a 403 forbidden back. For example:
exten => _91NXXNXXXXXX,3,Dial,SIP/sipura1pstn1/${EXTEN:1} works fine
exten => _91NXXNXXXXXX,3,Dial,SIP/sipura1pstn1/*67${EXTEN:1} does not
(even if I toss a couple Ws in)
I can't
2006 Jan 18
4
sipura ata 3000 UK (BT) CAllerid
Hi
I wonder whether anyone got the Sipura ata 3000 to decode British
Telecoms callerid and pass it to asterisk?
The userguide seems to suggest that this is not possible, is that right?
Conrad
2005 Jan 18
4
sipura 3000 mwi stutter problem
May be I have fiddled too much with my sipura settings but I can't get it to
give the stutter tone when there is a new voice mail waiting on the asterisk
box. I can either get a stutter tone all the time or not at all. Anyone
got this working.
Thanks
Chris
2006 Mar 02
3
Sipura SPA-3000 vs Linksys SPA3000
Hallo!
I had ordered a Sipura SPA-3000 in the UK, but the supplier turned out
to be unreliable and never shipped.
Yesterday I went looking for alternative suppliers and found the Linksys
SPA3000 device. It's a different box, but the specs look very similar.
Is this the same device? Has anyone used this Linksys SPA3000
successfully with Asterisk?
Thanks,
Frank
2005 May 24
0
Sipura SPA-3000 call progress, and interdigit delays
Hello,
I've been experimenting with Asterisk 1.0.6 and a Sipura SPA-3000, and
I've run into a couple of questions I haven't yet found clear answers to:
It appears that the SPA-3000 has no call progress on it's FXO
interface? Asterisk considers a dial() as answered when the SPA-3000 has
dialed the number on the PSTN line, not when someone has answered a phone
on the
2006 Mar 18
3
Sipura 3000 DMTF
I have three Sipura 3000 FXO untis for incoming PSTN lines on a small
pbx. There is an IVR to select the extension. The DTMF tones are not
being sensed so the IVR does not work and incoming calls are not being
answered. I have listed my sip.conf entries.
Is there any solution to this?
;Sipura units
[101]
type=friend
host=dynamic
context=default
secret=mysecret
mailbox=101
dtmfmode=inband
2005 Jun 06
1
Service Unavailble, Sipura 3000, CheckGroup, what the heck??
Folks!
I discovered some serious problem with several Sipuras 3000 but I don't know if the problem is with them or Asterisk. Basically, if I call a Sipura PSTN line, when there is a call already in progress, generally I get a 503 Sevice Unavailable, but if I try hard enough, I am able to get through and connect to dialed number. The other call gets disconnected but the originator of the