similar to: Cisco AS5XXX to asterisk debugging.

Hi guys. We have currently Asterisk CVS-v1-0-08/15/05-15:53:48 connected in SIP with a Cisco AS5300 (IOS 12.3). One PRI is connected to the Cisco gateway. The problem we have is that on incoming PSTN calls to the AS5300, relayed in SIP to Asterisk, the callerID name is not being transmitted. We received the callerID number but no name. I know we are receiving the name from the PRI in

Hi Please help! I have one X101P and TDM400P in my asterisk Box When i make a call from * to PSTN, everything goes Ok, When the PSTN hangups or * hangups, the busy tone is detected and * disconnects the channel without problems. The problem occurs when the call comes from PSTN. When * hangups, the other end (at pstn) does not hangup, it only presents silence. Please tell me how to solve this

Hello I've been using VoIP over a not so reliable net: I usually get a 5% to 10% packet loss and a very high jitter. I tried several codecs and parameters, and the only thing left to test is PLC (Packet Loss Cancellement). Have the astesrisk and digium people implemented PLC?, Are they implmementing it now? and, if not, Where can i find an implementation? Thanks in advance -- Jorge

Hi folks, where can I find the R2 beta code for Asterisk? Best, PauloHM -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20030806/9c7a0660/attachment.htm

Hi I' ve just installed TE410P and asterisk-0.7.2 from tar.gz on fedora core 1. When i start asterisk it shows me this: /usr/lib/asterisk/modules/chan_zap.so: undefined symbol: ast_pickup_call Apr 19 16:52:32 WARNING[-1085304704]: loader.c:358 load_modules: Loading module chan_zap.so failed! Where do i look, how can i debug? Thanks in advance Jorge Verastegui G RedCetus S.R.L

Hi i have buy two license of G729 codec, but after run Registration program i notice this error Registration unsuccessful... Error code: 110 ERROR! Your Internet connection is probably behind a proxy and the Registration program can't communicate with our server, however it has created the file: /var/lib/va-infoclient which contains your machine signature and

Hi I'm buying a new box and it brings the new PCI-e standard and not the old PCI slots. I would like to know if the Digium Wildcard TDM400P and <http://www.digium.com/index.php?menu=wildcard_tdm400p2>Wildcard TE405P will work with this PCI Express. <http://www.digium.com/index.php?menu=wildcard_te405p> Has anybody worked with PCI-e yet? As far as i understand, the Wildcard

Hello, So I'm seeing a rejected peer with 3.12.6. This is with a replica 3 volume. It actually began as the same problem with a different peer. I noticed with (call it) gluster-2, when I couldn't make a new volume. I compared /var/lib/glusterd between them, and found that somehow the options in one of the vols differed. (I suspect this was due to attempting to create the volume via the

Hi, I've connected a TE110P from digium with a 2 E1 to a Siemens PBX using asterisk from ubuntu linux. Everything is working as expected. This box is being used as a H323 gateway to the pstn. There are few complains but it is working pretty well overall. There is one thing that is bothering me. Asterisk says: May 22 05:03:39 WARNING[9360]: PRI: !! No channel map, no channel, and no ds1?

Does anyone have any idea what to try next? Here are the steps I have taken and the problem: (I wanted to post my question on the first line before I explained the problem and what I have tried) ---------- Node 0 has the file system mounted just fine and works great. When trying to mount on Node 1: `mount.ocfs2 /dev/mapper/data /cluster/ data` I get this error after about 30 seconds:

On Tue, Mar 6, 2018 at 6:00 AM, Jamie Lawrence <jlawrence at squaretrade.com> wrote: > Hello, > > So I'm seeing a rejected peer with 3.12.6. This is with a replica 3 volume. > > It actually began as the same problem with a different peer. I noticed > with (call it) gluster-2, when I couldn't make a new volume. I compared > /var/lib/glusterd between them, and

hi fellas, same old same in log of the probing peer I see: ... 2017-08-29 13:36:16.882196] I [MSGID: 106493] [glusterd-handler.c:3020:__glusterd_handle_probe_query] 0-glusterd: Responded to priv.xx.xx.priv.xx.xx.x, op_ret: 0, op_errno: 0, ret: 0 [2017-08-29 13:36:16.904961] I [MSGID: 106490] [glusterd-handler.c:2606:__glusterd_handle_incoming_friend_req] 0-glusterd: Received probe from uuid:

Hi all. A quick question about the checksum error detection routines in ZFS. Surely ZFS can decide about checksum errors in a redundant environment but what about an non-redundant one? We connected a single RAID5 array to a v440 as a NFS server and while doing backups and the like we see the "zpool status -v" checksum error counters increment once in a while. Nevertheless the

http://bugzilla.mindrot.org/show_bug.cgi?id=614 Summary: bug in krb4 support for OpenSSH on IRIX 64-bit ABI Product: Portable OpenSSH Version: 3.6.1p2 Platform: MIPS URL: http://lib.natur.cuni.cz/komanek/webland/html/unix/opens sh_patches.html OS/Version: IRIX Status: NEW Severity: normal

Logs from newly added node helped me in RCA of the issue. Info file on node 10.5.6.17 consist of an additional property "tier-enabled" which is not present in info file from other 3 nodes, hence when gluster peer probe call is made, in order to maintain consistency across the cluster cksum is compared. In this case as both files are different leading to different cksum, causing state in

Could you please send me "info" file which is placed in "/var/lib/glusterd/vols/<vol-name>" directory from all the nodes along with glusterd.logs and command-history. Thanks Gaurav On Tue, Aug 29, 2017 at 7:13 PM, lejeczek <peljasz at yahoo.co.uk> wrote: > hi fellas, > same old same > in log of the probing peer I see: > ... > 2017-08-29

I have not done the upgrade yet. Since this is a production cluster I need to make sure it stays up or schedule some downtime if it doesn't doesn't. Thanks. On Tue, Dec 19, 2017 at 10:11 AM, Atin Mukherjee <amukherj at redhat.com> wrote: > > > On Tue, Dec 19, 2017 at 1:10 AM, Ziemowit Pierzycki <ziemowit at pierzycki.com> > wrote: >> >> Hi, >>

Hi, Recently I'm noticing an interesting issue. My CentOS servers are trying to send logs to a logging server via 514/udp, however I'm not receiving anything. I did the following on CentOS *tcpdump -vvv -nn udp -i esn160 port 514* In another session on the same server: *nc syslog-server -u 514* tcpdump started to show me messages like: *[bad udp cksum 0x3ce9 -> 0xb0f5!] SYSLOG,

> On Fri, Oct 2, 2015 at 4:07 AM, Gene Cumm <gene.cumm at gmail.com> wrote: >> >> I have a patch that I think may help your situation of syslinux.efi >> being unable to load ldlinux.e64/ldlinux.e32 (though I don't know if >> any of you are using an EFI ia32 platform). >> >> The basics are that we try to enable UseDefaultAddress as it helps >>