similar to: Udev setup question for zaptel

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Greets all sorry for the posting but this one has me confused. I compiled Zaptel and am experiencing something strange. I followed the instructions on README.udevs to the tee, set permissions, etc. and I'm confused as to what gives. Zaptel compiled without a problem but no device was made.... [beta@staging ]# uname -a Linux xxx.xxx

> -----Original Message----- > From: Tzafrir Cohen [mailto:tzafrir.cohen@xorcom.com] > Sent: Wednesday, October 25, 2006 10:18 AM > To: asterisk-users@lists.digium.com > Subject: Re: [asterisk-users] Re: Meetme... No channel type registered > for'zap' > > > On Wed, Oct 25, 2006 at 10:06:02AM -0600, Douglas Garstang wrote: > > > -----Original

When I try to start up zaptel, whilst running ztcfg, I get the following error: Jan 1 10:48:18 bu ztcfg: ZT_CHANCONFIG failed on channel 2: No such device or address (6) My /etc/zaptel.conf is: fxsks=1 fxoks=2 loadzone = au defaultzone=au Channel 1 is a X101P card connected to the PSTN and channel 2 is a S100U box driving an analogue phone. The zaptel kernel module gets loaded OK as does the

I've been testing * on FC3. I have everything compiled and installed. However, when I do 'modprobe wcfxo' (I have an X100P clone), I get the following in /var/log/messages: Nov 24 10:23:40 jfd wait_for_sysfs[3366]: either wait_for_sysfs (udev 039) needs an update to handle the device '/class/zaptel/zaptimer' properly (no device symlink) or the sysfs-support of your

Hello everybody, After going through multiple posts on Internet and trying different things I can't seems get zaptel wcfxo loaded on the server correctly. I run dual P3 500 Mhz box. After reading README.udev I put a file 60-zaptel.rules /etc/udev/rules.d # Section for zaptel device KERNEL="zapctl", NAME="zap/ctl" KERNEL="zaptimer",

Just as an FYI.... I have a configuration suppestion to pass along... If you have: Fedora Core 3 Asterisk 1.0.x Digium Wildcard T100P PCI Card -------------------------------- In order to get the card to work you MUST edit /etc/udev/rules.d/50-udev.rules Goto the end of the file and add....... KERNEL="zapctl", NAME="zap/ctl" KERNEL="zaptimer",

Of course I am not a kernel expert, so .. please be patient. I am investigating on my zaptel/zapata problem. As the main error message asterisk quits on mentions <'/dev/zap/channel': No such file or directory> I went peeking over there. [Asterisk Verbose Error Mar 13 20:43:35 WARNING[5779]: chan_zap.c:763 zt_open: Unable to open '/ dev/zap/channel': No such file or

I have decided to move on from Asterisk@Home and start compiling asterisk myself now. I got a dedicated box and put my X100P in it. I installed the server version of CentOS 4.2 (2.6.9-22.EL kernel) barebones. The box is a dell GX270 workstation with 1GB of RAM. I got a fresh copy of O'Reilly's Asterisk the future of technology and begun. I downloaded the zaptel-1.2.4.tar.gz, libpri-1.0.9,

I have had a TDM400 with 2 FXO and 2 FXS working for ages (>12 months). It has stopped working. All four green lights are still lit. I have rebuilt zaptel and asterisk and restarted but the problem persists. /sbin/ztcfg -vvvv Zaptel Configuration ====================== Channel map: Channel 01: FXO Kewlstart (Default) (Slaves: 01) Channel 02: FXO Kewlstart (Default) (Slaves: 02) Channel 03:

>rom: "Jose Hernandez" <jfhernandez_01@verizon.net> >Subject: RE: [Asterisk-Users] Unable to open master device > '/dev/zap/ctl' > >If you are using udev you will get a message during compile suggesting to >read README.udev, I did not pay attention to this message. > >Anyways.. I did not get the error after creating a udev rules file in

Hi, I had problems described in another thread so went from a start, but now have problems when loading qozap module. I get : # insmod qozap.ko ports=9 insmod: error inserting 'qozap.ko': -1 Unknown symbol in module and in /var/log/messages: module qozap unsupported by SUSE/Novell, tainting kernel. qozap: disagrees about version of symbol zt_receive qozap: Unknown symbol zt_receive

hi there I'm trying to get asterisk going on gentoo 2005.1 I'm just getting my feet wet so I thought I would just stick with the stable portage packages. Right now that's asterisk 1.0.8 I emerge asterisk with the following make.conf file: CFLAGS="-O2 -mcpu=i686" CHOST="i386-pc-linux-gnu" CXXFLAGS="${CFLAGS}" USE="-gtk -gnome -qt -kde -dvd alsa

Hi, I am sorry if this message has been reposted, but for some reason I am having problems with posting it. I configured asterisk and zaptel modules with fedora2. I want to be able to load the zaptel wcfxo and wcfxs modules. For now I will use only the Wildcard TDM400P card. I am able to load the modules but I cant configure them using ztcfg or zttool because the tools are compiled to use the

Hi, I'm using zaptel-1.2.22.1 with asterisk-1.2.10 and following steps to make zaptel working... OS is gentoo linux 2006.1 Hardware: --------- 0000:05:01.0 Communication controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface Subsystem: Unknown device 8085:0003 Flags: bus master, medium devsel, latency 32, IRQ 22 I/O ports at b400 Memory at ff900000

It's a udev configuration. Read UDEV.txt, or, read the AMP wiki http://aussievoip.com for a step-by-step. --Rob -----Original Message----- From: asterisk-users-bounces@lists.digium.com on behalf of Jachin Rupe Sent: Wed 7/09/2005 9:16 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] /dev/zap* is not showing up (gentoo, portage,asterisk 1.0.8 hi

Hi guys, I'm hoping I've made a silly mistake here, but I've been staring at the screen for the past few hours and I can't work it out. I upgraded to 1.2.16 recently, and am having problems with zaptel. The card is detected, I get a reasonable output from ztcfg -vv, and zttool shows the installed module (TDM400) with one FXS module. But when I start asterisk, I get

zaptel compiles fine (make linux26) but when I modprobe ztdummy I get the follow error. [root@localhost zaptel]# modprobe ztdummy Notice: Configuration file is /etc/zaptel.conf line 0: Unable to open master device '/dev/zap/ctl' 1 error(s) detected FATAL: Error running install command for ztdummy System info: Linux localhost.localdomain 2.6.9-5.0.5.ELsmp #1 SMP Thu May 19 19:24:44

I installed TDM400P and X100P pci cards in a system running mandrake 10.1 official, kernel 2.6.8.1-12mdksmp. I can compile zaptel, libpri, asterisk and modprobe (zaptel, wcfxs, wcfxo) without errors. Except that running ztcfg and asterisk fails. [root@asterisk asterisk]# ztcfg Notice: Configuration file is /etc/zaptel.conf line 3: Unable to open master device '/dev/zap/ctl'

Greetings All! The Asterisk Call Manager works great. But I have one question for anyone who has used it. I cannot get the system to send some DTMF tones down the channel once the call has been made. Below is the script I am using to make the call, and start recording the channel. I am starting to make a system the will use asterisk to become an automatic random quality monitoring system

Hey list, I'm having problems to get running *. I don't have any digium hardware yet. I just want to perfrom some tests using SIP. I compiled asterisk and zaptel with ztdummy enabled on Fedora Core 3. When I try to start ztdummy I get the following message: localhost# modprobe ztdummy Notice: Configuration file is /etc/zaptel.conf line0: Unable to open master device /dev/zap/ctl 1