similar to: Trouble-shooting SIP/2.0 482 Loop Detected

Hi, I have researched more into the problem of my Asterisk set-up not answering calls. The following error was shown on the CLI, can anyone explain what the problem causing Asterisk to not answer the SIP calls be? Information: I have an Asterisk box on a home LAN, behind a D-Link router/firewall connected to a cable modem. The 82.x.x.x is the IP for my cable modem. 192.168.0.101 is my

You must create a output filter. Edit /etc/printcap and add your client printer like this: ... PC-PRINTER:\ :sd=/var/spool/lpd/PP01:\ :mx#0:\ :lp=/dev/null:\ :if=/var/spool/lpd/Filter/PP01:\ :sh: ... Adjust the printcap parameters as needed (spool directory, directory to find the filter script). Make sure the lpd can access the directory. Consult your manual. Now create the filter

On Wed, 1 Dec 2004 12:37:13 -0800 (PST), Ben Kirkpatrick wrote: > Do you find it difficult to manage four LD providers? > Can you show me part of your LD Macro and how it's used? > > I'm toying with two LD providers now, but don't have failover setup. >Just using each one for what they are best at (least cost). > >Thanks, >--Ben Kirkpatrick > > Not

I just created a new smbpasswd file, all users with unset passwords. Problem is, users can't set their passwords, only I can as root. Password is not set / blank, but they still get: >test> smbpasswd >Old SMB password: <enter> >New SMB password: Samba >Retype new SMB password: Samba >machine 127.0.0.1 rejected the password change: Error was : RAP86: The >specified

I'm trying to compile Samba 1.9.18p8 for Dec Unix OSF/1 4.0b >Using CFLAGS = -O -DSMBLOGFILE="/usr/local/samba/var/log.smb" -DNMBLOGFILE="/usr/local/samba/var/log.nmb" -DCONFIGFILE="/usr/local/samb >a/lib/smb.conf" -DLMHOSTSFILE="/usr/local/samba/lib/lmhosts" -DWEB_ROOT="/usr/local/samba" -DLOCKDIR="/usr/local/samba/var/locks"

We've got users logged into Win95 with one username, and they need to log into samba using a different username.... of course if they try to map to their home directory, samba will use the current username, which doesn't match, and therefore, password invalid. How can I specify username in the mapping? \\server\homedir <then somehow a username> I know there's a way in Totalnet

I have samba setup for our department and it's working fine, with mounting drives and using printers... now I want to be able to do the same thing for all faculty with roadrunner access from home. I've put the ip xxx.xxx. of the local road runner in the smb.conf file for hosts to allow, and the machine knows about the server by adding it to c:\windows\lmhosts.sam I log in as the user on

I've setup samba and can connect to a share with a password, but when I try to print, it prompts for a password... my unix password doesn't work. Any ideas? (BTW- this is running on DEC unix OSF/1 4.0b Here's my smb.conf: >#======================= Global Settings ===================================== >[global] > ># workgroup = NT-Domain-Name or Workgroup-Name >

Hi all. Just as a quote note, can I thank everyone on this list. I find my self finding pretty much every answer I am looking for on here. And a big thanks to all thoughs helping us out. Mass Respect :) Ok, I'm using a SIP provider (SipGate UK) to do my international dialing etc, working great from extension 8 on phones. However some more friends/contacts have started using SipGate also, and

Hi, A few days ago, we did a SAMBA 4 installation, intended to work as a DC. We followed the "Samba AD DC Howto". We runed samba-tool, with parameters: " domain provision --use-rfc2307 --interactive". We put as REALM "COMPANY" and as domain "COMPANY.LOCAL". Other options we used the suggested defaults. If we query DNS with the following query it success:

To help users diagnose boot errors, especially with external devices such as USB flash memory mass-storage, I've created this diagnostic MBR. It succinctly reports the values received from the BIOS, locates and reads the active partition boot sector, reports the magic bytes and and read-sector error code. Holding down a shift key during boot will force CHS mode even if LBA is detected.

Changes: * Fix [C]HS indicator over-write (was showing '5' not 'C') * Use 0xDEAD as magic-bytes filler to make it clear when read_sector didn't replace it * Improvements to commentary and description. TJ (1): Add Diagnostic MBR for trouble-shooting mbr/Makefile | 6 +- mbr/mbr-diag.S | 372 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2 files

Changes: * If Ctrl key is pressed force load from first hard disk (0x80) To help users diagnose boot errors, especially with external devices such as USB flash memory mass-storage, I've created this diagnostic MBR. It succinctly reports the values received from the BIOS, locates and reads the active partition boot sector, reports the magic bytes and and read-sector error code. Holding

Hi all, I noticed that my ssh logins to a particular server were taking up to 5 seconds to finally login. My tcpdump -vv weren't producing much output (not good) and my pings to and from that host were normal and almost identical to other hosts on my subnet that had no ssh login delay issues. Log files also showed nothing alarming. My hosts file was missing this at the very end of

First - Wine is great. I love it totally. To login into a company website I have to use IE6 - Firefox is not handling the Web Site due to some reglementations. IE6 runs fine and there are NO problems. Only after exit, the Wineserver keeps running and takes away a lot CPU Power. I can stop it manually (System Monitor -> Process. Right Click and I can stop it (and it relieves the Power from the

Why do attacks from the Internet get shown in the Asterisk logs with myAsteriskServerIP instead of the attacker's IP?! Really useful for blocking them, that is... Example: [Mar 6 00:00:00] NOTICE[1926] chan_sip.c: Failed to authenticate user 5550000<sip:5550000 at myAsteriskServerIP>;tag=ab8537ae (I replaced our IP address with myAsteriskServerIP. The attacks are not coming from

--- mbr/Makefile | 6 +- mbr/mbr-diag.S | 371 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 376 insertions(+), 1 deletions(-) create mode 100644 mbr/mbr-diag.S diff --git a/mbr/Makefile b/mbr/Makefile index 0bdf7e3..b9d743d 100644 --- a/mbr/Makefile +++ b/mbr/Makefile @@ -17,7 +17,7 @@ topdir = .. include $(topdir)/MCONFIG.embedded -all: mbr.bin gptmbr.bin

On 10/05/2019 14:44, Michal Privoznik wrote: > On 5/10/19 3:26 PM, lejeczek wrote: >> hi guys >> >> I have a qemu guest and openvswitch bridge and the guest fails to start: >> >> $ virsh start work8 >> error: Failed to start domain work8-vm-win2016 >> error: Cannot get interface MTU on 'ovsbr0': No such device > > Well, this means that

--- mbr/Makefile | 6 +- mbr/mbr-diag.S | 377 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 382 insertions(+), 1 deletions(-) create mode 100644 mbr/mbr-diag.S diff --git a/mbr/Makefile b/mbr/Makefile index 0bdf7e3..b9d743d 100644 --- a/mbr/Makefile +++ b/mbr/Makefile @@ -17,7 +17,7 @@ topdir = .. include $(topdir)/MCONFIG.embedded -all: mbr.bin gptmbr.bin

Hello, I've been looking at the DialPlans by some poeple using Asterisk with SipGate, but the new Asterisk@home 1.0 allows you to create Outbound routes etc, does using the web admin give the same effects? When I add a SIP Trunk with my Sipgate settings and use a pattern of "8|." to place all calls with a 8 prefix tot he sipgate account the softphones dial the number, the Asterisk