similar to: Which is the best signalling for FXS

Hi list First of all could you please explain loop-start and ground-start for me? What are they used for? Next, I have the following configurations: dahdi-channels.conf : context=pstn-channels signalling=fxs_ks channel=>130 context=phone-channels signalling=fxo_ks channel=>127 chan_dahdi.conf : [channels] cidsignalling=dtmf cidstart=dtmf signalling=fxo_ls pulsedial=no

Me again... I have service with a company that does not allow for a BYOD plan. They will not give out credential or server info either. Is it possible to run the FXS port of the ATA to an FXO port in *? The service I have is throug Broadvox Direct using the Mediatrix 2102. I have tried this using loop start and kewl start. The * box sees the incoming ring, picks up and starts my dial plan. But

Sorry, that name is a misnomer. However, I was excited to find that Ruby has a built in Observable module and I''m pretty bored, so I apologize in advance.... require ''observer'' # one who is observed class Celebrity include Observable attr_accessor :name attr_reader :is def is=(val) @is = val changed notify_observers(self) end end # one who

I have a bit of a weird problem that I'm having great trouble debugging. I have a TDM400P PCI card with two FXO and two FXS modules. Both FXO modules are connected to BT lines here in the UK. Both BT lines have V23 Caller-ID, which works fine with Asterisk. Both asterisk and zaptel are fresh from CVS. Both FXO modules (channels 3 and 4) are in "group 1" for outgoing calls. My

Greetings ... Sorry for cross posting, but I have seen this problem on both lists ... Okay, I am not sure if this is a problem only on RedHat using the rpm, because I tried only with rpm installations ... Install Samba3 from rom on RedHat 9. Configure and join domain, kewl. Test winbind with wbinfo -u and -g, also kewl, but no answer from getent passwd ... put in winbind in

Hi, I've installed a TDM400 card in an aging Dell Optiplex GXa (see my post a few weeks ago). The machine powers the card okay, it shows up in an 'lspci', and asterisk runs fine with it. I've tried both 1.0.4 and 1.0.5. The box in question is running a 2.4 kernel. However... I'm having trouble getting the card to work with a variaty of handsets attached to the FXS ports.

Ouch, part reset, quickly restoring reality (0) Power alarm on module 1, resetting! I have looked though a lot of email on this issue, and no one seems to have the answer. How many people are seeing this on a TDM400 card? Does anyone have a "REAL" answer to it. Yes, I do have the power connected to it! Regards Garry Taylor

Hi, had the quota info added to the AD in an unused field, and it seems to work ... >> On 25 Sep 2017, at 21.51, Garry Glendown <garry at glendown.de> wrote: >> >> >> >> On 25.09.2017 20:28, Sami Ketola wrote: >>>> On 25 Sep 2017, at 21.19, Garry Glendown <garry at glendown.de> wrote: >>>> >>>> doveadm(root): Error:

On 25.09.2017 20:28, Sami Ketola wrote: >> On 25 Sep 2017, at 21.19, Garry Glendown <garry at glendown.de> wrote: >> >> doveadm(root): Error: chdir(/root/) failed: Permission denied >> (euid=479(dovecot) egid=478(dovecot) missing +x perm: /root, dir owned >> by 0:0 mode=0700) >> doveadm(root): Error: chdir(/root) failed: Permission denied >> >>

is it possible to achive the following scenario? faxmachine--tdm40bFXS--SIPnetwork--Gateway--faxmachine i have found a lot of documents about asterisk receiving a fax and saving it to a file. But i want to receive the fax via SIP and send it to my faxmachine. I also want to send a fax from my faxmachine through the digium card, so asterisk should send the fax via SIP to the gateway, which also

Hi.. I've looked through all the documentation and searched numerous websites and I can't find any viable current way to cluster ssh-agents. The functionality gap I see is to allow a situation where 2 ssh-agents are running on 2 different trusted machines. If one of those machines goes down passwordless logins should be allowed to continue through the backup ssh-agent. And when the

On Tue, Mar 10, 2020 at 09:08:56PM +0000, John Garry wrote: > On 10/03/2020 18:32, Christoph Hellwig wrote: > > On Wed, Mar 11, 2020 at 12:25:28AM +0800, John Garry wrote: > > > From: Hannes Reinecke <hare at suse.com> > > > > > > Allocate a separate 'reserved_cmd_q' for sending reserved commands. > > > > Why? Reserved command

On Tue, Mar 10, 2020 at 09:08:56PM +0000, John Garry wrote: > On 10/03/2020 18:32, Christoph Hellwig wrote: > > On Wed, Mar 11, 2020 at 12:25:28AM +0800, John Garry wrote: > > > From: Hannes Reinecke <hare at suse.com> > > > > > > Allocate a separate 'reserved_cmd_q' for sending reserved commands. > > > > Why? Reserved command

Hi, after fighting Dovecot almost every step of the way, I have finally gotten most of the functions configured on a customer box (used Cyrus on a previous install, but it was dropped from SLES 12 ...) The mail server setup uses LDAP for user authentication, has a central maildir tree (.../dovecot/maildir/<USER>/...) that is used for all users' mail, sieve is also running well. The

Hi. In order for restoration to work fine, I have to create a folder using the interface (e.g RounCube) which also creates the required structures. Then I copied the emailfile e.g xyz:s to /myrestoredemail/cur/ How do i properly create a folder with its structures(index,etc) without using the RoundCube web inteface ? Thanks CoolAtt

Hi All, I'm not sure if this is a problem specific to samba, or to cups, or to something else. I have a samba 3.0.7 server acting as a PDC, and print server for my wonderfully overcomplicated home network setup. The problem is when I send a PDF to the cups server to be printed, it only prints the first page then the cups mgmt interface will say that the job is completed. If it's a

Hi List, I am not familiar with the commands of IPtables so I want use tools on top of it. What do you suggest. Can I make test of it inside CentOS on top of VMWare server with only one LAN inteface? I try to use Pfsense, I believe it has easy to understand GUI but it fails to install on my desktop machine to test, maybe due to hardware comaptibility. Kernel panic during boot even after disabling

Hi * after trying everything I could think of and find on the web, I'm totally stumped ... maybe someone give me some hints on what I'm doing wrong, or where to look ... I have an ancient customer box with sendmail & cyrus imap, with imap using an LDAP database of users (no locally configured users), all of which is working fine. This machine needs to be replaced by a new

Hi, R users, I'm using while() in R to set a condition. My condition is: i<523 or i>535. How should I write this in R? I try "while (i<523 or i>535)" and it does not work. Thanks. Garry On Tue, Nov 10, 2009 at 11:26 AM, Hongwei Dong <pdxdong@gmail.com> wrote: > Exactly! Thanks, Duncan. > > Let me re-phrase me question like this: > > 1) X_i values

Hello! We are using the Digium 405PP card, and getting the following messages: Jun 16 16:16:17 NOTICE[81926]: chan_zap.c:6832 pri_dchannel: PRI got event: 6 on Primary D-channel of span 1 Jun 16 16:16:17 NOTICE[81926]: chan_zap.c:6832 pri_dchannel: PRI got event: 8 on Primary D-channel of span 1 My config file is below. We are trying to set up D-Channel on channel 24, 1-23 in trunk group 1,