similar to: T100P -- data?

I'm RTFM'ing, but I can't figure out how the dhcpd.conf file specifies the boot server, and how it differentiates between whether it's FTP or TFTP. I've tried option 66/next-server, and option 150, to no avail. And the docs just don't -- leastwise, in the way I'm reading them -- make sense. I've checked the admin guide, I've checked the wiki... no dice.

Hey, all. I quoted a customer about $100 for some cheap SIP phones. I was planning on using the BT-102's, but he called said they look like "Princess phones," and I have to admit that he has a point. Some of the other inexpensive phones look decent, but (for example) the SPA-841's wiki entry says the remote end gets a lot of static. Since it'll be being used from a noisy

Hey gang, I was successful in recompiling my 2.4.20 kernel to support HDLC. I was successful in hooking up our T1 line into the zap card. I was successful in being able to ping equipment on the other end of the T1. I was unsuccessful in pinging the outside world from the other end of the T1. I've attached a cheezy image of the network. Here is the routing table: [root@asterisk root]# route

Hi, all. I've got a fax extension in my extensions.conf, but spandsp never sends my faxes there. Both applications -- txfax and rxfax -- are registered by Asterisk, so they compiled and installed correctly. I've got a Sangoma A104 card, and (as some people had suggested) have loaded ztdummy. Everything seems fine, except that it never gets recognized as a fax. I've even turned off

Hi, all. Got my Uniden UIP200 today (ordered from thetwistergroup.com), and was very excited to set it up... until I came to the realization that there were no docs with it whatsoever. There was, however, a sheet of paper with the stock warnings (don't use the phone in the tub, etc.), AND a URL -- for documentation. Score! Well, no. The URL it gave me, bcs.uniden.com, does indeed have

Hi, all. I want to have a button on my receptionist's 601 that, when pressed, will forward her current call to a given extension. Is there any way to do that? I've tried to RTFM, but I'm coming up empty. Thanks, -Ken D'Ambrosio

Hi, Just rejoined the list after many happy years of using samba in a production enviroment. I'm having problems getting my head around samba 3.0, or specifically, the UID/GID/SID mapping. I've been RTFM'ing but am still uncertain about the best way to go... I have a Win 2003 controlled ADS domain with five thousand users and just over a thousand groups. Users and groups (users and

[Please excuse if this is a repeat; I initially tried to send it from a different account, and it's been held up for a couple of days awaiting moderation.] 1) What's the absolute minimum required (hardware-wise) in order to get one in-bound POTS line into Asterisk, and then have IP phones "inside?" [In other words, I obviously need a NIC -- but what would be the

For some reason, I cannot get samba (or Win98, depending on how you look at it...) to allow a win98 client to print. I search the list archives, but I didn't find anything similar. So here goes. Symptoms: - Win98 client can access fileshares OK. The printers show up OK as well in network neighbourhood. - On Linux, printing (lprng) works OK. - In win98, e.g. dir >

> Post your extensions.conf and what's on the CLI (asterisk -r) As requested: # cat /etc/asterisk/extensions.conf [incoming] exten => s,1,Answer() exten => s,n,NoOp(CallerID is ${CALLERID}) exten => s,n,NoOp(DID is ${DNID}) exten => s,n,Background(enter-ext-of-person) exten => 1625,1,Playback(digits/1) exten => 1625,n,Goto(digits/1) exten => i,1,NoOp(CallerID is

Okay, I'm terribly confused. If I build and run Asterisk with the 1.0.0 sources that I downloaded from Digium, my Polycom 300 works just fine. If I build with either various CVS builds, or the 1.0.6 sources from Digium, I get "No compatible codecs!". WTF? I'm using -the exact same- config files for both; I've tried enabling/disabling ULAW, ALAW and G279 on the

Hi, all. I just upgraded my sip.cfg for my Polycoms, and that damn warble on registration(? -- maybe it's on acquiring an IP?) has started again. I still have the old sip.cfg, but can't figure out which option it is. Any help? Thanks! -Ken D'Ambrosio -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

Hey, all -- I'm looking to do some LDAP/Samba 3.x integration. I've found a bunch of docs, but a lot of them either are outdated, incomplete, or reference materials I haven't been able to find. Is there a one-stop-shopping document I should be looking at? Thanks! Ken D'Ambrosio

Hi, all. I'm trying to create a PDF queue... or, rather, I already have a homebrew solution I hacked together with an lprng filter, and it doesn't work too well. The solution at www.linuxgazette.com/issue72/bright.html, which uses the smb.conf and "print command" paramaters, appears to be much more elegant, but has one major shortfall: I don't see any way to get the

On 2015-10-20 05:33, Martin Kletzander wrote: > On Mon, Oct 19, 2015 at 03:57:39PM -0400, Ken D'Ambrosio wrote: >> Hi, all. Ubuntu host, attempting to get virsh working with >> VirtualBox... and failing. Here's what happens: >> >> root@foobox:~# virsh -c vbox:///session list >> error: failed to connect to the hypervisor >> error: internal error:

I've got a Samba box (2.2.5a) as a member of a Samba domain. Both the PDC and client are running 2.4.18 with XFS and ACLs compiled in. Problem: on the client, I can -NOT- modify the ACLs for files from Windows. (Note that I can modify the stock Unix permissions, but not the extended users/permissions that ACL support offers.) If I try, they just vanish when I click "OK".

Hello again, test setup as in previous messages. With fts = lucene, I enabled the adapted decode2text.sh (at least I tried...) as suggested in the comment section. On dovecot-start /var/run/dovecot/decode2text socket is created with sufficiant permissions (rw for anybody), but decode2text.sh is not started (it's rx for anybody). When creating lucene indexes, I cannot see it executed either

On Feb 29, 2008, at 6:10 AM, Daniel Ruoso wrote: > Then I got the idea of generating an API description file from the > public header files of the library Sounds neat. In the past I've done this with objdump for the public symbols in a library. In theory you don't care about types no findable by the api. A nice tool would allow one to stamp the interface as release time,

I've to project and build a fresh new box with * on. Basically, i'll have this situation: The office is connected to the phone carrier with a PRI. I need to let users continue to use their analog phones in a office, and an IP-phone based solution on the remote office, that will call using outside using the PRI on the first one. PRI---> Asterisk ---> Analog phones |

In putting together the SoundPack code, I am looking at the various language/locale specific code, and wondering how it all really stands... So, share with me, non-English speakers, what is your experience and impression? I heard a few comments during AstriDevCon, that some of the languages are not quite right; some said their language was understandable, but... Would anyone be willing to share