similar to: asterisk with sipphone.com

Hi all Now I'm making IVR sequance that is customised [mainmanu]. I wish to notify invaid command like a following exten => i,1,playback('your command is ...') exten => i,2,playback(${EXTEN}) ; <---- Say 'i' oops! ;-( exten => i,3,playback(' is incorrect! please again ') # This exten lines are figure for instruction. # I know to use with gsm filename.

sorry, this problem is fixed by myself. we must need set 'canreinvite=no' each user. --- I'm try to discconect a call with SIP. when caller make a call, 'show channels' result is following. mack*CLI> show channels Channel (Context Extension Pri ) State Appl. Data SIP/mack-1bfc (default 1 ) Ringing AppDial (Outgoing

I am running Asterisk CVS-04/16/03-18:57:13, and mpg123-0.59r It all sounds great and it plays at the correct pitch and speed. However at the end of the file it simply does nothing. It does not go on the the next step in the extension.conf nor does it hang up. It just sits there. During play I have two processes running for the mp3 stream: root 6300 6299 8 22:32 ?

I have a test SIP account set up with WorldCom and I have been trying to have Asterisk register to the WorldCom server with no luck. It appears that the SIP headers are different coming from Asterisk. I have included a packet capture from a successful login with a Windows Messenger client for reference. I have also copied in the SIP packet I captured with sip debug turned on. In my sip.conf file,

Hi Isamar maybe I think disclose your code to CVS is best and fast :-) mack > > Hi folks, > > I'm trying now to play with fsk_modem.c and callerid.c > to get the Japanese callerid working and I already got to make some > steps.. > I don't know if anybody accomplished that already... but > Since two or more minds think better than one, send private messages >

for inbound calls, i can register context = from-sipphone register => 1747xxxxxxx:passwd@proxy01.sipphone.com but how do i configure to make outbound calls to them? exten => _1747XXXXXXX,1,GoTo(dial-sipphone,${EXTEN},1) .... [dial-sipphone] ; ; SIP to sipphone.com ; exten => _X.,1,Dial(SIP/${EXTEN}@??????) ^^^^^^

I have been successfully connected (incoming and outgoing) to FWD for a very long time. A few months ago, I changed from SIP-based FWD service to IAX2-based, and that went fine as well, both incoming and outgoing. At the time, I was running Asterisk 1.0.3 Stable. I rarely use the service, so other than noticing that I was always successfully registered to FWD, I didn't make or receive calls

I seem to be having a problem with transcoding and/or agreeing on a valid codec. I am running a new image pulled from CVS at 1:30 PM CST. The issue occurs when I try to make a call to a toll-free number over sipphone.com. Here's what I see in the console: NOTICE[1259545280]: File channel.c, Line 1478 (ast_set_read_format): Unable to find a path from G729A to ULAW NOTICE[1259545280]: File

We needed the client browser to be open all the time for dynamic data to load without the page refreshing. After looking at all of our options we decided on programming it ourselves using flash rather than java. We have a flash frontend thats tied to our backend mysql DB. We use it for loading web site traffic data, email opens, click-throughs, bouncebacks, stats, etc. It could also be used with

Does anyone else have DTMF issues with SIPPhone? When calling into my DID, and entering, say, 1002. Sometimes it will recognize it properly (rarely), other times it will receive something different. Such as, 1102 or 1000, etc. Has anyone else been having these issues? I'm only accepting ulaw and alaw, and my relevant sip.conf information follows: [sipphone] type=peer

Originally posted by: mailto: Hi all Now I'm making IVR sequance that is customised [mainmanu]. I wish to notify invaid command like a following exten => i,1,playback('your command is ...') exten => i,2,playback(${EXTEN}) ; <---- Say 'i' oops! ;-( exten => i,3,playback(' is incorrect! please again ') # This exten lines are figure for instruction. # I

Hello, can anyone comment on how one could use SIPphone's $89 All-in-One adapter with Asterisk? Sounds to me like it should work as both a FXO and FXS. It would be a cheap way of getting started with Asterisk and PSTN. Any comments on the SIPphone FX200? Any comments on SIPphone in general? Thank you for your help

Hello when i dial a toll free no using sipphone i get this error message. How do i solve this? Any help will be appreciated. console message: Starting simple switch on 'Zap/2-1' -- Executing SetCallerID("Zap/2-1", "17473863282") in new stack -- Executing SetCIDName("Zap/2-1", "Deepak JV") in new stack -- Executing

Has anyone else had problems registering with Sipphone over the last few weeks? Previously, this had worked fine. I contacted Sipphone technical support, but they're not much help. register => 17471234567:password@northamerica.sipphone.com/123

I'll admit it. I'm a asterisk newbie (but no stranger to telephony). The setup is simple: two Grandstream BudgeTel 100 phones (SIPPhone specials) on a private segment calling to a Linux box acting as the segment's firewall with a leg on our public network. The phones are setup as SIP/phone1 (x1000) and SIP/phone2 (x1001), respectively (thanks to the Asterisk HOWTO). Getting IAX

When attempting to call one of the example numbers, like 17474745000, I only get "488 Not Acceptable Here". It works fine when I configure the softphone (Xten X-Lite) to use sipphone's server directly. Am I missing something? Here's my relevant config sections: sip.conf: in [general]: register => 17472442457:mypassword@proxy01.sipphone.com [sipphone] type=friend

Hi, Does anyone know how to dial toll-free (800) numbers through FWD or Siphone? Using the configuration below, I can dial out to SIPphone.com users by simply dialing their number (1747XXXXXXX) and can dial out to FWD users by dialing 1383<FWD#> However, when I dial 18005551212 through SIPphone, or through FWD (depending upon which line is selected in "; 800 Toll Free Numbers"

Hello All. I started setting up my Asterisk system yesterday and everything was going well, i have registered with sipphone.com and set-up my Asterisk system to register with sipphone per the sip.conf file below. It was registered perfectly but I could not receive calls so I added in the line "insecure-very" and I then used the Washington DC access number to test and the phone

hi guys, have any of you guys managed to use msn messenger to authenticate with asterisk using its DNS name? based on my experience with other sip proxies, msn will not authenticate if it sees a different realm than the realm of the client. one workaround i did was to edit the chan_sip.c to send a pre-defined realm, and also edit the Contact: field. after this, asterisk would send a 401 to the

Hi, I am using Asterisk to set up a reminder-like system, with asterisk auto-dialing a user via SIP and playing a reminder file when the user picks the phone. I use Gizmo service for SIP and I'm able to call through it. However, when asterisk dials a number, Gizmo first answers then tries bridging 2 channels. Right after answer Asterisk starts playing the reminder. It obviously results in