Displaying 20 results from an estimated 700 matches similar to: "Voicetronix OpenLine4 immediately hangs up on every call"
2003 Dec 03
1
Asterisk with Voicetronix OpenLine4 card
hi there,
i've been able to successfully run asterisk with the Voicetronix OpenLine4
card, it can accept calls and function normally. The only problem I'm
experiencing so far is getting the card to outdial to a third party.
What I'm trying to achieve is basically call bridging, where the caller
dials in to asterisk, some IVR plays and then attempts to perform a
"transfer"
2004 May 26
2
Voicetronix OpenLine4 -- Help Needed
Hi. I need help with my brand new Voicetronix OpenLine4 board that I
installed into Asterisk.
After building the Linux device driver and inserting the module, I
modified the /usr/src/asterisk/channels/chan_vpb.c file to uncomment the
US settings and comment out the Austrailian ones.
I made the appropriate entries for routing in vpb.conf and
extensions.conf.... All appears to be well, except
2004 Aug 13
2
not hangup
Good day all
I'm using sip protocol and a openline4 card.If I dial out of the pstn
and hangup a answered call it does not disconnect the connection.It
shows there is still a call on the external phone I called but on my
side its says i'm not connected.We are using x-ten soft phones
Can someone please help me
Thanks
Altus
2004 Jan 17
1
Voicetronix OpenLine4: disable answering on a particular channel & delay before dial
2004 Aug 27
0
Voicetronix Segmentation Fault
Hi,
I am using a voicetronix OpenLine4. I downloaded a recent asterisk
CVS from voicetronix webpage but have had no luck to reduce echo on
outgoing calls and for it not to crach on incoming calls. I dont
think both problems are related though.
Here is an output of what happens when a new call comes in and my
voicetronix tries to pick it up and crashes asterisk:
> vpb/1-1: Event
2004 Apr 26
1
troubles working with Voicetronix Openswitch12
dear Hackers,
i have a voicetronix Openswitch card, and i have been finding it very
dificult to get it to work with asterisk.
i intend to connect 8 ports to the PSTN and 4 as station ports.
problem 1:
On running asterisk all i get at first i get :
event[9=>[11] station OFF hook] on vpb/1-12
even [12=>[11] loop drop on vpb/1-12
event [12=>[11] Tone detect:GRUNT
event [2=>[11] Dial
2004 May 31
2
scandsp, voicetronix and rxfx
Hi all,
Trying to get fax reception going using a voicetronix openline4 card,
however, there are two issues (as far as I can see)
(1) Currently the voicetronix world (cards, firmware, drivers, channel
prog etc.) does not do fax tone detection. I have spoken to the
voicetronix guys , understand what has to happen there and may do some
hacking if I can resolve the second issue. Meanwhile, I
2006 Mar 10
1
voicetronix and asterisk@home
Any guidance on how to get my openline4 to get recognized by asterisk@home?
I've got my vpb drivers running, but not sure how to add it as a trunk,
should it be via zap? or is there another way?
Thanks,
Chuck
2004 Jan 29
3
How to delay dialing
Hi there,
I am trying to delay sending out DTMF from Voicetronix OpenLine4 to the CO
line. The reason being is that Voicetronix sends out the DTMF too fast even
before the line is fully established with the carrier. Usually when dialing
an 8 digit number, only 7 digits are actually successfully heard by the
carrier.
Currently, my dial plan is:
exten => _9.,1,Dial(vpb/1-1/${EXTEN:1})
Daniel
2007 Feb 21
0
Using asterisk with vpb driver (OpenLine4)
Hello, list,
I am using Asterisk with an OpenLine4 card. It worked well with Asterisk
1.0. Then I upgraded the system, Asterisk 1.4 had some problem to
compile chan_vpb, but I managed to compile it manually. Still Asterisk
does not work because it refused to load chan_vpb module. I had to
revert back to install Asterisk 1.2. Then I get a error:
asterisk: hip.cpp:793:
2005 Feb 23
0
Newbie Help - Auto Fallthrough
I am a serious Asterisk newbie: just installed asterisk last week and it is
now running with our Voicetronix OpenLine4 hardware.
All is working as expected with one exception, in the following sequence
(extracted from my extensions.conf file):
[GetConfirmation]
exten => s,n,SetVar(TimeOut=0) ; if timeout and TimeOut=1 then user
already timed out once, so hangup
exten =>
2003 Dec 16
2
Help! VoiceTronix Multi FXO/FXS Problem
Hello, Hacker
I install VoiceTronix OpenSwitch 12 port PCI Telephone Card,
and setting vpb.conf, extensions.conf following
My problem is:
When i dial to fxo(channel 9-12), it is ok,
but when i continue press exten 102, the channel crach with error messages
following
exception caught: VPBAPI_DIAL_INVALID_LEVEL, file: vpbdial.cpp line:872
Do i ignore some setting for VoiceTronix OpenSwitch12
2003 Mar 20
11
Voicetronix
Has anyone gotten the voicetronix boards to work with Asterisk, what
would it take? Or does anyone know where I can get 4 ports or more fxs
PCI cards that do work with asterisk?
Brian J. Schrock
Network Engineer, RHCE, CCNA
Anistone Technologies
Phone: 614-798-9106
FAX: 614-573-7165
6926 Avery Rd.
Dublin, OH 43017
2004 Apr 22
0
Re: VoiceTronix Openline 4
Ron,
VoiceTronix worked with me last week and backported the new chan_vpb
that's in the current HEAD CVS tree to the 1.0 stable branch. So if you
are using 0.7.2 or 0.9.0 you can go to the VoiceTronix website now (note
that this is very new) and download an Asterisk package. When you
download it there is an new chan_vpb.c that needs to be put in your
asterisk source code tree. Also there
2006 Mar 08
0
Openline4 and asterisk@home
Hi all,
Can somebody help me get my OpenLine4 card running with asterisk@home?
I've got my VPB drivers configured, but can't figure out how to map
trunks and channels the typical way in the AMP config interface for
Asterisk@home.
Apparently I'm supposed to use /vpb/1 type commands, but I'm not sure
how it should work.
I'm relatively new to asterisk, I did a bunch of
2005 Jul 28
0
Asterisk@home and OpenLine4 issue
Hi fellows
I'm trying to set up an OpenLine4 card to an A@H
I made a "custom trunk" and putting a "dial string" like
this "vpb/1-1/$OUTNUM$" I configured the outbound
routing using "8|." as patern and "NXXXXXX" as dial
rule..., but I'm getting an "all circuits are busy now" when
I dial "8NXXXXXX"
Here is my vpb.conf
2004 Sep 06
1
Voicetronix OpenSwitch12
Hi all,
I used to have an OpenLine4 card, but decided against using it due to
some problems with hangup detect. Does anyone on the list actively use
Voicetronix's OpenSwitch12? What are your opinions on the card?
Cheers,
Flynn
2003 Dec 23
0
Outdialing with Voicetronix
Hi all,
Just thought I'd pass along some pointers when outdialing with Voicetronix's
OpenLine4 card.
I was having a tough time dialing out from *, it probably has something to
do with chan_vpb.c not waiting to hear the dialtone before telling the card
to dial. A quick fix was to insert a "," in the dialstring telling the card
to pause before dialing.
However when the
2004 Aug 30
1
Voiceronix and asterisk
I have installed a 6VPCI card from voicetronix's but i can't get astersik to
use it!
Now looking at the loaded modules the chan_vpb is not loaded- so I assume
that is why it is not working.
Now I modified my vpb.conf file and extensions.conf, have I missed something
Has anyone a installation guide as I am very new to this!!
I have had asterisk working with SIP extensions.
by dowloading
2004 Apr 25
0
Newbie Setting up Voicetronix OpenLine4
Is anyone using the VoiceTronic Openline4 PCI (fxo) card? I am trying to
setup Asterisk using a Digium 40B (4 port fxs) and an OpenLine4 (4 port
fxo), however I can't find any examples or post that utilize this card. I
have my stations (Sayson 390) ringing each other, but haven't had any
success ringing out. I have the OpenLine4 loaded and all of the new
drivers working good, just