similar to: Cisco 12sp+ and 30VIP

I'm attempting to do a first-time Asterisk install at home, firstly for use by my self and my family, and secondly as a learning experience. I've got a new house, and the previous owners removed all but one (1) phone jack. So I figured I might as well build a PBX. Functional goals include station-to-station calling, rudimentary auto attendant/voice mail, and perhaps tieing into the

I have been looking for the firmware for the 12sp+ and 30VIP and have been unable to find it. Any help in locating would be much appreciated. Thanks ======================================================= This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error

I was able to get Asterisk working with the demo on FreeBSD 5.3 without crashing, but not the music on hold, so I just have that disabled for now, but I'm ready to get some IP hardware working. So I picked up a Cisco 12sp+ IP phone (mistake?) and am having difficulty finding any truly helpful instructions / troubleshooting to get this configured to work with asterisk. If I could just get

Hi, I?ve been following some information about the latest chan_sccp drivers for a few weeks. I installed and tried about any variant of driver that exists in the chan_sccp system. Despite a few little changes in the CLI options I am still encountering a lot of problems with the phone. When not using the phone for a while, it "disconnects" from asterisk (1.0.7) after a few hours

Hi list! I'm trying to configure the Kirk IP 600 wireless (DECT) system. The wireless phones are regular DECT phones, the Kirk IP 600 is doing the voip part by registering/gatewaying the phones to a callmanager server. The phones do not work and I think the problem is that they do not register at asterisk but I'm not sure because I don't understand a thing of the sccp/skinny

Hi, Does Asterisk have a limit to how many NAT'ed SIP clients it supports behind a single IP? I have the weirdest problem ever. I have three SIP endpoints. SNOM phones, if it matters. Their extensions are 200, 201 and 202. Apart from the username/password, the sip entries in sip.conf all have identical configuration. They're all NAT'ed behind the same IP. 200 and 202 registers

hi! i had some good news regarding the cisco 7920 and the internetworking with asterisk (and possibly SIP ?). Status: chan_sccp.so not coredumping anymore :-) Phone contantly in reboot loop [see below] :-( Reboot Loop means: ------------------ Phone auth's with AP Phone gets IP from DHCP & TFTP Server Phone loads OS7920.TXT Phone loads SEP<macaddr>.CNF.XML Phone loads

Hi All, have some decent success on the 7920 "activation" in Asterisk. Latest status: chan_skinny does NOT work with 7920 chan_sccp does WORK with 7920 (!!) however: to remove coredumping the chan_sccp just comment out the MWI (messagewaitingindicator), then it compiles fine. Then change sccp_helper.c: return "P0060302" instead of the old value. and voila: Phone is

Please forgive me my ignorance ... I've spent two days trying to find out something about the format of the default configuration file, which CCM produces. The only example I have so far is the one from the chan_sccp source. There were tons of references on entering the callmanager commands on a cisco command line - which I don't have (don't need thanks to chan_skinny + chan_sccp).

Hi, I just got some interesting information from Kirk Telecom (www.kirktelecom.com). This company has been in the business of providing DECT solutions (IP gateway, base stations, repeaters and handsets) either to be used with Cisco CallManager (SCCP protocol) or with the Innovaphone IP PBX system (H.323). Two important elements: 1. It seems they foresee a SIP version of their product in Q1

All, Can you use the global variables set in the [globals] section of the extension.conf file in other configuration files? Here is an example: I have a file called globalvars.conf that I include in the [globals] section in extension.conf. I would like either (a) that the global variables being defined in this section can be used from voicemail.conf or (b) that I can include the

Does anyone have the 7970 work with sccp? I have used the example configurations from the wiki. I can see that the phone is failing to retrieve the CTLSEP<MAC>.tlv file and then is able to retrieve the SEP<MAC>.cnf.xml file. The phone is hanging with the message "updating ctl". Thanks, John SEP<MAC>.cnf.xml: <device> <devicePool>

Hi there We have a Cisco VOIP environment here, with hard and softphones. I have a softphone account/etc, but I'm a Linux user and (as far as I'm aware) there is no Cisco softphone for Linux. However I can run Asterisk. So I was wondering if there is a way to "convert" a SIP phone transaction into a SKINNY transaction so that the Cisco environment thinks it is a Cisco

Hi Siggi, > > 7960 and then "Call Ended" on the Display (curious about that !!!). > > That seems to be normal for the 7920. I've sniffed the registration > procedure with Cisco's newest 3.3(3) CallManager (+patches), and it's > doing the same thing. Maybe that's some odd way of testing if the > CallManager ("CCM") really works... >

Hi, Does anyone know how to make this thing (7940) work with asterisk (chan_sccp module) ? I've set the configuration according to the wiki and now the phone just keep asking for CTLSEP<xxx>.tlv from my tftp server. In the cisco's web interface, I found this in the device logs : 0x8106, 0x0, 0x12300800 0x8106, 0x0, 0x12300800 0x8106, 0x0, 0x12300800 0x8106, 0x0, 0x12300800 ...

Hi there! Has anyone succesfully used a Cisco 12 SP+ with *? If so, how did you do? I'v not even tried, but before trying I thought I could bug you somewhat. =) //Filip

Hi Angel and many thanks for your answer The application still sending & receiving data .- strace over the application: write(1, "\33[1;1H\237#SF \234", 44) = 44 <--it was sent from the application to the terminal, but ssh didn't received this string read(0, "\10", 1024) = 1 <- the client remained sending data and it

Hey all, I have set up my cisco 30vip using chan_skinny because chan_sccp wont register. The problem I am having is, everytime a call is sent to the phone Skinny/200@jason it rings once, then asterisk segfaults. heres the output -- Executing Answer("SIP/4437821638-7588", "") in new stack -- Executing Dial("SIP/4437821638-7588",

Hi all, I've been playing around with a cisco 7940 phone. It seems to like talking to Asterisk with the chan_sccp plugin. The only problem is that it tries to call out to a SEPXXXXXXXXX.cnf.xml file to verify it's configuration. I've found docs for SEP*.cnf files, but not .xml ones. Does anyone have a .xml file for a 7940 (Skinny?) phone that I can start with? ...Jeff

http://chan-sccp.berlios.de/ 20050713 ftp://ftp.berlios.de/pub/chan-sccp/chan_sccp-20050713.tar.bz2 I didn't have a spare 7960 to use this week, so maybe some line issue is still present. - fixed a memory leak on database updates (dnd, cfwd*) - fixed old memory leak on unload (now unload chan_sccp.so and load chan_sccp.so work. It does reload the config when asterisk is running) - socket