similar to: Problem when using asterisk + gnugk

Hello folks. We are trying to interconnect an asterisk installation with a gnugk 2.0.5 installation to become able to use some H323 hardware that needs a gatekeeper (particulary an Ericsson WebSwitch 100). We have managed asterisk to dial H323 endpoints successfully (although calls are interrupted immediately after connection with "spawn extension exited non-zero"), but we could not

Hi, i'm trying to setup Asterisk to work with GnuGK using the Openh323 channel driver. I have a Gatekeeper that gets H.323 calls from a Cisco GW. To this Gatekeeper I've registered some endpoints, Cisco ATA186, Snom 100, etc. Now i want send the numbers 083xxx into Asterisk. Easy, i'll just enter something like this into oh323.conf: gwprefix=083 And all my calls starting with 083

Hi! I'm trying to build gnugk with asterisk. Asterisk is working well with chan_h323 built with needed PWlib v.1.5.2 and open H.323 v.1.12.2. But gnugk' s installing instructions says that I need latest PWlib(1.17.1) and openh323 to get gnugk work. Now, with installed pwlib and openh323 gnugk's compiling fails and I get error 1. Do you have any working solutions with asterisk and

hi, we are using a voip h323 switch. the switch sends all caals to our Gatekeeper (gnugk). gnugk musst send all calls to asterisk and asterisk must do his choice (sip endpoint or out to PSTN) Making calls to our h323 switch works fine over asterisk. what must i configure to get inboung h323 calls from our gnugk to asterisk? any hints for me? thx -- Thomas K?pper 01063 Telecom GmbH &

Hi, I use with asterisk gnugk a gatekeeper for h323 client. I don't understand why asterisk can't have the H323-ID (callerID). In the gatekeeper's monitor I have this H323-ID but not in asterisk. Does anyone know something about it, or how can I send a caller ID to asterisk ? Rattana -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi all, I have the following setup: UAs ------------SER ------------------------ ASTERISK ---------------------GNUGK --------------- GWs SER is configured to route call requests from UAs to Asterisk. Asterisk is configured to receive the call on SIP channel and dial out to GNUGK over H323 channel. The problem I'm facing is that asterisk sends out the call request to GNUGK and times out

Hi, I also had some problems using chan_oh323 together with gnugk. * <-> gnugk <-> h323-phone When I called the phone and hang up, befor the phone was picked up, the h323-phone continued ringing. The same, when the h323- and some sip-phones were called, and the sip-phone picked up the call first. (It is annoying, when you are talking to someone at the phone and the phone on the

Hi I've a problem with a gnugkv2.0.7 I've compiled gnugk successfully I've installed PWlib-1.6.6 and openh323-1.13.5 libraries successfully When i run gnugk i have this error: error while loading shared libraries liboh323_linux_x86_r.so.1.13.5 cannot open shared object file No such file or directory I try to use command export: export

Hello, I installed Asterisk from CVS on Redhat Linux 9 and working with chan_h323 module and g729/g723 free codecs too. My network connection diagram: ---------------------------------------------- X-lite/X-Pro-->Asterisk--chan_h323-->GnuGK--->AS5300-->PSTN boldsoft*CLI> show version Asterisk CVS-v1-0-03/24/06-15:27:08 built by root@boldsoft on a i686 running Linux I can make

I'm trying to configure Chan_H323 to register with GnuGK... without success... i've failed finding sample configurations. I'd greatly appreciate anyone who can provide sample config of H323.conf and gnugk.ini I am tyring to configure Asterisk as a neighbor in GnuGK. I'm always getting this error on Asterisk. ERROR[16384]: chan_h323.c:1987 load_module: Gatekeeper registration

Greetings to All, I hope someone has already gotten this working. I spent all day today trying to get ooh323 and gnugk to run on the same box. After a lot of tweaking to get everything compiled, I got both up and running. I can make calls IAX to H323, but cannot make calls in the reverse direction. I have tried many different configs on the GK, but always come up with the same error. It appears

I am having a slight issue. I am trying to register 2 asterisk boxes with GNUGK and when I try to add the 2nd it gets denied cause of it saying its a duplicate. How do I change the configs to allow more than one asterisk box register to the same GK? brian This email was scanned by: Mcafee GroupShield ---------------- CONFIDENTIAL DISCLAMER ---------------- All information provided in this

Ok, I've managed to get inbound and outbound calling to work with chan_h323 and gnugk. A few questions: 1) if I do a reload in *, chan_h323 loses its registration with gnugk, and will no longer pass calls to it. A second reload will crash *. Is this supposed to be? 2) For a configuration in h323.conf like: [office] type=h323 prefix=9 context=outbound I get a message saying:

Hi List, I have a client that wants me to replace their existing H323 gateway. I am able to get ooh323 and h323 to work fine in a native environment, but the whole thing goes to heck when I have to cross networks. Gnugk seems to be the answer to this, but I can't seem to get it to work right. Any ideas? Thanks Danny Nicholas

hi all I'm trying to setup a dlink dph-100h phone (actually a dph-100m but with the h.323 software) with asterisk and chan_h323. AFACS, the dph-100h software can only be configured to point to a gatekeeper. I know I don't need to do this, but it's a test before I setup my Symbol Netvision phones (I don't have an access point for them now). First, this is what I have, and what

Hello there. Is there somebody with this connection working? I can't seem to make this work at all. Could someone please share some .conf files? Cheers, Vedran. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050818/71480bd9/attachment.htm

Hi to all, I've installed Asterisk 1.4.9 with h323, and gnugk as soft gatekeeper. I've tested h323 using ohphone and I can talk between them, then I've tested SIP with Twinkle softphones and function very well. Now I have to perform call from h323 to sip and viceversa. How can I do it ???? I receive h323 call from a Cisco Voice GW to my Asterisk and this call have to go to a SIP phone:

I've read in the README file of oh323 channel that , if I want to use a GK, I have to download the v.2.0.2 from the gnugk Site, but the version that is now available is th v.2.0.3. Any problems with it? thanks! mdory -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20030521/418a7d07/attachment.htm

Hello all, I have seen some people asking how to configure asterisk to work with h323 but i did not manage to do fix it yet (i am not an asterisk expert). Can someone help me configuring asterisk? It is already compiled asterisk 1.4.5 with H323 support. Everything looks fine. Then i understand i need to configure several files: -sip.conf -ooh323.conf -extensions.conf do i also need to configure

Hi all, I would like to call from SIP client to Asterisk then GnuGk, then Cisco 5300 to PSTN phone. Is this possible? I need simple config asterisk and gnugk.Can somebody help me? Ganbaa -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040629/cfe09e1e/attachment.htm