similar to: AW: AW: Junghans Quad-BRI card and asterisk cvs-head

> The bristuff distribution comes with a install.sh script > (./install.sh) > which downloads, compiles the required software on your system. > > If you want to do it manually, look into download.sh to see the exact > cvs checkout options which downloads the required asterisk and libpri > versions. Yes, I know which libpri/asterisk versions bristuff downloads when using

We're using the Quad-BRI card from Junghanns.NET with corresponding drivers (bristuff 0.0.2). The driver tries to patch asterisk libpri, which fails for current version. Anyone got an idea what'S the latest version of asterisk / libtri usable with the Quad-BRI Card? Thanks, Martin

Hi folks, I just wanted to use Klaus-Peter Junghanns' great bri-stuf to work with the actual cvs head (26.05.2004). You can download my modified patched version of it under http://capi4linux.thepenguin.de/download/asterisk/ I think it works fine at the moment but I'm not sure if it's all perfect *g* ;-) Regards, Julian Pawlowski

Hi - Anyone using zaphfc cards (bri-stuff-0.0.2) on a Portugal Telecom BRI service? I am getting loads of errors and the audio is very distorted all the time. System is a Dell PIII/933 MHZ with SCSI. Here in the UK we have perfect audio with a Compaq PIII/500 MHZ SCSI system. Files are identical in both systems as below: Is there anything magic about Portuguese ISDN? The PCI bus in the

Hi, I guess I'd need to run Beronet quad and octo bri cards under bristuff to get zaptel features (echo canceling, timing source).... Am I right or could I achieve this also with chan_misdn - their native driver ? Running bristuff on Beronet cards is unsupported. Has anyone succesfully run Beronet quad BRI cards under bristuff recently ? Do they work ? Regards, Rob.

We have a QuadBRI ISDN card from Digium. We would like to make it work with Fedora Core 4 (maybe FC3), but haven't succeeded. Compilation of bristuff from the Digium homepage fails, both the stable version with asterisk 1.0.9, and the experimental version with asterisk CVS-HEAD. Has anybody here succeeded to make this work? Or could we even be so lucky that somebody made RPMs for this? Lars

BUG/SYMPTOMS: 1.Under certain circumstances, octoBRI (and most likely quadBRI) ISDN cards (Junghanns/CologneChip) severely distort certain ISDN payload. 2.Although these claims relate to the bristuff patch, the problem might not be limited to bristuff and in fact be rather asterisk/zaptel/libpri related. 3.Signal distortion is limited to the use of the CVS version of the Bristuff patch for

Hi Folks, just updated my current Dialplan available on http://capi4linux.thepenguin.de/download/asterisk/config/ It now heavily uses ODBC database (MySQL) to hold most of the data like extensions and incoming connection numbers. An example databasefile is also included. The denylist has also been updated for future and current settings of the german telecom regulator. Again I added many

Hi Siggi/Jan, >If so, there's still a load version conflict (although I've >never seen a >7960 or 7940 care about the version communicated through SCCP): > >On the phone, press "Settings", then 4 for load information. >watch out for the "App-Load-ID". On my 7940, this is >"P00305000300". Yours >is most likely a smaller number... >

hello: thanks for Tzafrir Cohen for dahdi testing. I installed dahdi-2.1-r3c svn code and asterisk1-6 for testing OpenVox B400P and junghans card. i fund that there is bug (i think) to dectect NT or TE mode. actually on the board, i set it as TE mode, but after start wcb4xxp, but it show the port is NT mode. to detect the TE mode, I modefy the code in base.c

Hi all! Was anybody able to install kapejod's zaphfc drivers together with RealTime application? I'm in big trouble because bristuff relay on STABLE version, while RealTime is included in the CVS-HEAD. I found this hint, "Installing zaphfc with CVS-Head" at http://voip-info.org/wiki-Asterisk+zaphfc+install, but it was written many months ago: may it be still useful? TIA, Alex

Hi, Bristuff works great with HFC card... your compilation problem may come from your kernel configuration... You should check this doc, at least, for the redhat config : http://www.automated.it/guidetoasterisk.htm Then, installation of Bristuff works like as charm ! Bye David Masure -----Message d'origine----- De : vdasilva [mailto:aquamoon@wol.co.za] Envoy? : mardi 28 juin 2005 09:01

Does anyone test Asterisk 1.2.X + bristuff-0.3.X and TDM card? We can't get it to work. -David -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Julian J. M. Sent: Friday, March 31, 2006 1:44 AM To: Chris Earle; Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] Re: BRI

I'm using a Cologne chip card in my Asterisk box with zapHFC drivers (bristuff-0.0.2). The system works well, but this way I'm not able to run newer version of Asterisk. Do you think it's better to use i4l support and newer version of Asterisk or keep the bristuff with older asterisk ?? Have anyone tried chan_mISDN on a 2.6 box ? How does it run ???

Hello I have asterisk running in Red Hat 9 with a cheap HFC card on i4l. I have choppy sound problems sometimes, and echo problems often. I am using a 2 port Grandstream ATA, Grandstream BT and a Grandstream GPX-2000 I read that changing to BriStuff will fix the echo problems, but have also read other users say that the only way they solved the echo/choppy sound problems was using a Fritz ISDN

All, I have been trying to get CAPI4Linux working on my machine and being frank am failing miserably! I am looking for any help available, I am real newbie (so please be gentle) and choose to run Mandrake 9.2 as it appears quite friendly (or so I thought!). I have been following the guidance found at http://www.voip-info.org/wiki-Asterisk+How+to+connect+with+CAPI for the AVM card (actually I

Maybe this is rather a hardware question, but I am posting it on this list because the probability of someone else of you having tried this is greater here than other places I can think of. I have an ISDN card that is setup in NT mode using the zaphfc driver in bristuff, and I got it working perfectly with one ISDN phone using a crossover cable and 100 ohm termination at the end of the cable.

Hi, I'm having some trouble setting up a Xorcom Bri 4 port. I have compiled asterisk and zaptel using the Bristuff bristuff-0.3.0-PRE-1y-g patches. So I'm running zaptel-1.2.17.1 and asterisk-1.2.18. The problem I'm having is that for one I get no LEDs showing if the unit is in TE and NT mode (not a issue for me but may have some impact on things) I have no errors in any logs I

Hi, I solved the Problem: the context defined in zaptel.conf: context = zapincoming was not in extensions.conf, so nothing worked. ( I assumend this context is only necessary for calls from zaptel, not to it) This may be a bug: in the verbose log I found nothing like "[chan_zap] Could not initialize ..., due to ....", this had helped alot and had saved alot of hours (-;

I have * with i4l installed and working - on a dumb eicon card. It seems in order to get DTMF out of the BRI (for business banking - etc) - I should change from i4l drivers to capi drivers. wiki help seems to be for the Fritz card only...??? I have ticked the suggested boxes in 'menuconfig', explored the capi4linux websites - etc... but am missing some magic. I've "modprobe