similar to: Support for Snom 200 Extension Monitoring

Hi all, I've programmed on a SNOM function key the destination "**77" which in my extension plan reprograms/toggles an asterisk DB variable which I use in the extension plan for some call routing decisions. I would like the SNOM extension light to permanently reflect the current toggle status of my application logic/asterisk DB variable. Is something like that possible to do in

Hi, I'm trying to set up my SNOM 200 with extensions, with different ringtones - but it doesn't seem to work. I've defined two extensions for it in Asterisk and in the SNOM 200 configuration. In the SNOM home>settings>SIP>Lines config page, I have set the ringer for the first extension to "ringer1", and "ringer6" for the second. In

An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20031214/949c1368/attachment.htm -------------- next part -------------- Hello I have configured IP 7905G and SNOM 200 for Asterisk. Now problem is that I can call from IP 7905G to SNOM 200 but not the other way round. Instead I get "FORBIDDEN" Message on SNOM 200 LCD when ever I try

An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20031215/9327b656/attachment.htm -------------- next part -------------- Hello I have configured IP 7905G and SNOM 200 for Asterisk. Now problem is that I can call from IP 7905G to SNOM 200 but not the other way round. Instead I get "FORBIDDEN" Message on SNOM 200 LCD when ever I try

Hi, does the hint extension work together with the Snom phones in stable? I don't get an error in the dialplan, but it does not work either. On SIP/26 I want to monitor SIP/22. This is what I do right now: extension.conf [incoming] exten => 955,hint,SIP/22 exten => 955,1,Dial(SIP/22) sip.conf [26] ... subscribecontext=incoming ... Running Asterisk 1.0.2-BRIstuffed-0.2.0-RC2b TIA

Hello All, I'm trying to get my SNOM 200 to work using the GSM codec. The problem is it wont' pass dtmf digits. I have it dtmf outband on, inband off. In my sip.conf I have dtmfmode=rfc2833. Whenever I press a digit on the snom phone I get "invalid gsm data" so I think it's a configuration problem in the snom, anyone have a working configuration using gsm? Thanks -Matt

Ok, not exactly an Asterisk problem, but... I picked up some SNOM 200 phones because SNOM's have been recommended for use with Asterisk and they have line buttons that can subscribe to presence. However, they don't appear to power up when connected to my Negear FS108P, which is an 802.3af Power-over-ethernet capable hub. I am pretty sure these are the SNOM 200b, in that the ethernet

An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20031221/41e5bcd1/attachment.htm -------------- next part -------------- Hello All, Whenever I try calling SNOM 200, I am getting "Everyone is Busy at this time" message though line is free. I tried with firmware image of 2.02t and 2.03b (this I received from SNOM customer support) but

With a recent update to Asterisk CVS, and versions 2.02r and t of the Snom 200 firmware, I'm getting the Snom phones stuck reporting "Busy.": -- Got SIP response 486 "Busy Here" back from 10.12.34.248 -- SIP/3064-b07d is busy They're on-hook, not doing anything. They are registered fine. I can pick them up and call out over Zap or IAX fine. I just

I decided to give the whole family IP phones for christmas, all hooked into my asterisk server, so all the nephews can have their own lines. However, one of the phones I got was the SNOM 200. That's worked fine for me on my own network, but I'm having bad luck getting it to work behind NAT talking to Asterisk. It talks to my termination/origination provider, which seems to ruthlessly

Please forgive me if this is a silly question. I've been following this thread in the hope that I could put my * server and snom 200 into full-time service very soon. I need to find out how to have the lines configured so that it does not return a busy reply when only one call instances is engaged. Am I supposed to create multiple extensions on my asterisk dialplan to reflect the 5 call

I'm using the SNOM 200 latest SIP beta (so that I can have the GSM codec, etc). Everything seems to be working fine, but the music on hold doesn't play when I use the HOLD button on the snom. Any suggestions? Thanks, --Ernest

Hi, I am trying to use the support for monitoring extension states of a snom 220. In the extensions.conf file I added: exten => 770,hint,SIP/770 It means that when the snom phone boots, it will register it-self to asterisk as a monitoring phone for 770: Asterisk knows that the SIP/770 is monitored. I am using the 3.56q-beta firmware. It is in the DESTINATION option as it said on the tiki

Hi, I've looked through the archives and seen references to placing calls on hold on a snom 200 (any version of the firmware but we have the latest: 2.05e.) Basically, we can't place calls on hold on the snom 200! The manual talks about the Flash button (which is really the "R" button, as far as I can tell.) Pressing the R button will immediately disconnect the incoming call.

Christian, Just a quick heads up warning that something seems to be amiss on the Snom 200 running v2.03h code. The Message Waiting Indicator is blinking (due to a voicemail left in Asterisk) as its suppose to. Some time later the LED stops blinking (as though no voicemail); then later it starts blinking again. I left a voicemail to x3008 (button 2) this morning at 8:48am, and purposefully have

I would like to use one of my Snom 200's 5 programmable keys to park calls. I am using image SIP 2.04g. I have tried a variety of combinations and have come to the conclusion that: 1) On the Key Mappings administration page, I must select the "Transfer" under the "Break Keys" option box to be able to successfully transfer calls using the "Transfer" button. 2)

Question for other snom 200 users: 1. We have horrible sound quality regardless of the codec we use in the phone or specify in *. Has anyone else run into this early on and found a software fix? 2. Speakerphone will not work for playing VM messages, it chops the message into unintelligible fragments of audio. Any ideas? 3. Initially we have horrible introduction of background noise into the

Snom 200 has be set up with extended key pad. The product literature also mention multiple sip registration. How many registration can it handle? It does not seem to appear in the user manual. David Kwok

hi listmembers, please test my new patch to chan_sip.c which is to make call pickup on the snom phones (and maybe other phones that support 'INVITE/Replaces') work and make comments in the bugtracker http://bugs.digium.com/view.php?id=3644 so it can make its way into the cvs. this patch sipsubscribe-20050715.rev779.txt enables: * monitoring of other lines (using the 'hint'

Hi list, how does one get a SNOM 200 MWI to work with * ?? When I press the MWI button it doesn't connect with voice mail on my * box. thanks