similar to: Eliminating silence suppression(?) on IAX2 calls

I am running the most recent asterisk 1.2.13 on a Fedora 3.0. When I go into asterisk (asterisk -r), defaults to verbose 3 and I get a stream of messages: Remote Unix connection Remote Unix connection disconnected ... ... (keeps on repeating). I went to google and searched on "asterisk Remote Unix connection disconnected" but cannot find anything I can recognize. I checked my iax.conf

I've been looking around for an example of a method of reading back a caller ID value, but I haven't found anything that doesn't use Festival. I'd rather not resort to the Mr. Roboto voice if I can avoid it. Playback of the numbers one at a time is perfectly fine, so I'd like to use the default female Asterisk voice (the sound files are in place on my server). Does anyone have

hello, I have a test setup with 2 asterisk servers, each having a one snom 100 via sip using it. I`m experimenting on how trunking between them would work. I have them setup for RSA authentication which I plan to use in the future. So I`ve setup the keys and servers seem authenticate to each other. One is named phila and other hurricane. Here is what I see on phila: -- Registered

[BEGIN] 2018/8/24 16:57:41 [root@localhost puduct]# guestmount -v --rw -a /home/kvmsystem/VSOS_2G.qcow2 -m /dev/sda1 /mnt/ids/ libguestfs: trace: set_verbose true libguestfs: trace: set_verbose = 0 libguestfs: create: flags = 0, handle = 0x7f243deb9920, program = guestmount libguestfs: trace: set_verbose true libguestfs: trace: set_verbose = 0 libguestfs: trace: set_recovery_proc false libguestfs:

Got no responses to this, but the list seemed to be down for a while, so here it is again. Sorry for the extra bandwidth! John Hi, I've been messing with getting SIP working for days now, with limited success. I've got Asterisk set up on a remote server with the echo test. Please try it out to verify I've got the server working right: sip:robot at nixon.butchwax.com

Setup as follows: [private*] - Natting Router - [public*] [private*] cannot register via IAX2 correctly while [public*] is running. Status remains UNKNOWN even after minutes, calls from [public*] to [private*] are not possible. Console output of [public*]: | *CLI> iax2 show peers | Name/Username Host Mask Port Status | iaxtest/iaxtest (Unspecified) (D)

I'm trying Asterisk 10.0 (as 8.x is not passing PSTN CallerID) and Asterisk 10.0 is no better. I'm still getting: WARNING[12295]: chan_sip.c:14446 check_auth: username mismatch, have <11>, digest has <pstn-1270> NOTICE[12295]: chan_sip.c:22769 handle_request_invite: Failed to authenticate device "KMIEC Z" <sip:7804715665 at 10.0.0.110>;tag=1c1222950155 Anybody

[I'm sorry to trouble the list with this, but this is the only way I know to contact the person concerned] This message is for Stephen Karrington - it appears that you have over-agressive 'spam' filters and we can no longer email you. Please rectify this if we are to have meaningful conversation! The original message was received from Linus Surguy

I am looking to install a web interface for Asterisk to transfer calls and look who's on the phone. If anybody has a working web interface please let me know. I installed the www.asternic.com (operator) But when I bring up my web browser it says transferring data and does not bring a browser. -----Original Message----- From: asterisk-users-admin@lists.digium.com

My compliments on the release of syslinux-5.0 and happy holidays to the entire Syslinux team.? I have a longer message in me.? Lots of curiousity about the direction of the project, but that will have to wait until I finish my first 5.0 project (*not* my first Syslinux project), which just happens to touch past problems: drive enumeration. This particular effort is on a USB flash drive, with two

I saw a couple of posts about this in the archive, but none seemed specifically to address the problem I am having. If I missed something please let me know. Right now I would classify myself as "novice," and there is probably really nothing so trivial that I couldn't possibly have screwed it up. :-) I'm trying to use the AMD command to detect answering machines, and have

I was doing a laptop repair job today and needed to boot from a USB thumb drive, in order to free up the CD/DVD burner. Fortunately, the laptop to be repaired permitted one to boot from a USB thumb drive. However, there are still PCs out there that can't boot from a thumb drive (I have two), so I was wondering if it's pos to use the CHAIN module to boot from a thumb drive ? I looked at

Hi all, We keep getting these and all the calls between these two asterisk boxes get dropped. what is going on here, I have been trying to solve this problem on my own but maybe I don't have the trunk setup right. also I have posed the output of my full log of the machine with the zap interface, the other is using ztdummy. IAX.conf on machine 1: [general] port=5036 ;iaxcompat=yes

Just tried the latest release and found a minor bug. Have a UFD w/ SYSLINUX, which boots a simple .BSS image no problem. Launching exactly the same image on a ISOLINUX disc fails w/ the following error msg: Invalid image type for this media That's it for this msg. Later....Jet -- Powered by Outblaze

Hello, I run Asterisk in a 100% VOIP installation with the Polycom IP-500 phones. Every once and a while I have problems with either dropped calls between Asterisk and my provider, or invalid RTP audio streams with phones behind NAT. I have had a few Asterisk developers look into my installation and even my provider check my setup but still am having problems. They tell me that I need to

Hello, I have several customers describing something like annoying "silence suppression". So I did some tests and I can confirm. After disabling echo cancellation in zapata.conf the "silence suppression" effect is gone, but there is a little echo of course. I do not have this problem on other boxes where I am using oslec as an echo canceller. All my calls are SIP to ZAP (E1).

Does the Asterisk server support VAD (aka Silence Suppression)? I want my SIP phones (7960's) to use VAD when dialing out the x100P interface. I know the phone can do VAD , can the Asterisk server be setup to do it? and if so, where do I set the configuration? Thanks Lee Goodman -------------- next part -------------- An HTML attachment was scrubbed... URL:

Let's say that I have a call coming in to Asterisk through a TDM400P and going out through SIP to someone on the Internet. Is there any configuration option that would allow me to do silence suppression on the RTP stream generated by Asterisk on behalf of the TDM400P connected user? SIP phones allow me to do this easily, but I'd like to be able to conserve upstream bandwidth on calls that

I upgraded from 1.0.9 to 1.2.1. In 1.0.9 everything worked perfect. Now, I call in my IVR, and after navigating in menus when I get dialtone for dialing extension, Sound is choppy and I get bunch of messagess: -- Silence suppression is disabled (option_silence_suppression=0 chan->timingfd=30) -- Silence suppression is disabled (option_silence_suppression=0 chan->timingfd=30) -- Silence

Hi Friends, Currently i am using the asterisk 1.4.x version. In that i want to enable to silence suppression in the SIP calls. Please tell me the configuration changes to be done. Thanks in advance, balasam. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090106/dde500d5/attachment.htm