similar to: AS5300 and Asterisk

hi All Any body already setup asteriks call routing to Cisco AS5300 with SIP Server ? i need informations sample config for that, or can show how to route docs . thanks Dirgan --------------------------------- Meet your soulmate! Yahoo! Asia presents Meetic - where millions of singles gather -------------- next part -------------- An HTML attachment was scrubbed... URL:

All, I have access to a Cisco AS5300 w/ 4 T-1's and a Cisco 3600 with no boards. I was wondering if it would be possible some how to Have one of these Ciscos in-between our sip phones and the asterisk server so that we could use G729 Codec. Sip Phones (7960's & ATA's) via G729 -->Cisco Gateway-->Asterisk via G711. Any ideas? Has anybody done such an implementation or know

Hi everyone, I'm new to the list, so I apologize if this is a trite question. We're an ISP with a barely used PRI, and also currently use asterisk with POTS service on an audiocodes gateway. We have a notion that we want to take on a new revenue stream, with our model being as such: 1) Convert one of our PRIs into a two way voice/data bundle. 2) Plug this PRI into a piece

Greetings, I am attempting to configure an AS5300 to provide a SIP based gateway to the PSTN from Asterisk. I have been unable to identify through the docs how specifically this should be configured in Asterisk and have not been able to get things working through trial and error. I am sure I am missing something fairly obvious here but any guidance (or example cfgs) would be much appreciated.

Hello, We are working on implementing a solution for a medium service provider. They were previously using a Cisco AS5300 gateway with some PRI trunks to receive modem calls, then route them out the Internet. The Telco they were buying the trunks to discovered this configuration and restricted them due to legal conventions, and stated that in order to continue doing this, they would have to talk

http://voip-info.org/tiki-index.php?page=Asterisk+bounty+SIP+simultaneous+registry From the WIKI: Contributions Manager: Daniel Jimenez (cuban) Bounty: $50 USD Date opened: July 10, 2004 Contributors: cuban ($50) Detail Yes, Yes I know you could do all sorts of fun with the dialplan to produce a similar effect, but I still would like to be able to do this. Plus it's easy money :). I

Hi, I'm trying to detect and or log the duration a a conference (Meetme). I need it in order to do some billing for theses services. Any ideas on how to do it? I googled around but found nothing. Thanks in advance epablo -- Pablo Endres <epablo@comvoz.com> ComVoz Communications USA: +1 954 343-2085 Ext 199 Venezuela: +58 212 7713195 Ext 199 Colombia: +57 1 3256840 Ext 199

Hi Now, my Cisco AS5300 sent call to my asterisk, but two problems: When i call the phone number, i have: [Oct 28 06:01:16] NOTICE[12813]: chan_sip.c:18160 handle_request_invite: Call from '' to extension '0426000000' rejected because extension not found. [Oct 28 06:01:18] NOTICE[12813]: chan_sip.c:18160 handle_request_invite: Call from '' to extension

I wouldn't expect you to be using RFC3389 if your using A-law, can you include your IOS version and IOS config file ... I have not specified any allow's or disallow's in my * config for the codecs with my 5300, I also use Cisco 79xx phones and I use the option within the phones config file to select the preffered codec and when I change this to G.729/A-law/U-law all works perfectly

Hi all. I've ordered a TDM400P with 4 FXO, but after using my X100P I'm thinking about returning the TDM400P because of bad echo issues. If I do get the echo issues I'll look at digital options. My question: Is anyone using ISDN (BRI) in the states? I've heard ISDN4LINUX devices suffer bad echo but chan_capi works great. All the chan_capi cards I find though are for overseas

Hello, I have a Cisco AS5300 connected to Asterisk (1.6.2.9) Between 15-16 minutes, the call is disconnected without reason. Here is what is displayed in the debug: Received an SDES from 10.4.0.10:17399 -- Got SIP response 420 "Bad Extension" back from 10.4.0.10 -- Stopped music on hold on SIP/as5300-1-0000004d == Spawn extension (dialin, 065939191, 2) exited non-zero on

Hi i'm trying to connect to the PSTN in the following way sip ATA -> * -> gnugk -> Cisco AS5300 -> PSTN I'm using asterisk CVS-HEAD-06/01/05-14:33:15 running over RH EL3 Asterisk-Oh323 0.7.2 pre1 Open H323 v1.13.5 pwlib v1.6.6 and I'm having a lot of trouble, gnugk and * both have public ips and are not behind any type of firewall, the sip ATA is behind a firewall and

Is it possible to terminate calls via SIP on a Cisco AS5300? Did anyone do it? How? Do i need an special IOS version? Ive been trying to compile the OpenH323 channel for the last month, but errors still happens. Thanks in advance. -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello, I have 5 digium's g.729 codecs and succesfully register with asterisk, I have incomming call from my cisco AS5300 to Asterisk through IP. But Asterisk always use g711 ulaw instead of g.729. When I disable all other codecs other than g.729 in both cisco and asterisk, calls get dropped once connected. The codec list show on my cisco AS5300 for g.729 are: g729r8 g729br8 I suspect that

Anyway to make hitting `0` during a voice mail dial an extension? The bosses used to have that feature and love it. Their VM prompt would say: "Hello, My name is blah blah. I am currently unavailable. If you would like to speak to an operator press 0 now, otherwise leave me a message". Extension 0 exists, but dialing it during a VM prompt does nothing. Thanks, -- Daniel Jimenez

Could anyone who has successfully configured Asterisk to use g729 to conference 10-20 people please post their configs. I purchased and successfully installed 2 g729 licenses and but when I dial into my conference number on the Asterisk box from a SPA-2000 set to allow all codecs, it always appears to connect using ULAW. My iax.conf file includes the following under the general section

Hi all, I realize this is OT. I just got a Cisco AS5300, and I need to configure it like such: Asterisk -----(H323/SIP)------> Cisco ----- (E1/PRI)------->Telco So calls originate from the Asterisk side (registered users on SIP or just ZAP phones), and they go out H323 or SIP to Cisco, where they go out PRI. I have the Asterisk side sorted :) (either H323 or SIP), I need help in the

Guys. I need some advice on some h323 issues. I need to test connectivity from Asterisk to a Cisco AS5300 that has PSTN lines and to cisco 3600 voip routers. H323 needs to be used here but I was wondering if anybody has linked Asterisk to these Cisco routers before? Thank you for any pointers.

Hi i test a new equipment on my backbone: a Cisco AS5300 with voice dsp ressource connected at a E1 Voice Link. I want that all call incoming on the cisco 5300 are sent to Asterisk and all Asterisk outgoing call are sent to Cisco AS5300. Actually, i configure the AS5300: isdn switch-type primary-net5 ! voice service voip sip ! voice class codec 400 codec preference 1 g711alaw codec

Hello all, When I generate an out-going call from *, the DTMF detection is not working ? ASTERISK --> GW AS5300 --> PSTN But the DTMF is working correctly when it's an incoming call. PSTN - -> GW AS5300 - -> ASTERISK Well, I tried with the 3 dtmfmode of asterisk inband, rfc2833 and info, no way !!! Is it normal that asterisk try to setup the outgoing-call using ULAW ? if I