similar to: ISDN BRI Problem

-------- Original Message -------- Subject: Answer App hanging in I4L Date: Tue, 25 May 2004 13:49:50 +0530 From: Murali Krishnan <murali@bksys.co.in> Reply-To: ismk@myrealbox.com Organization: bk SYSTEMS (P) LTD., To: asterisk-users@lists.digium.com Hi, Anyone using ISDN4Linux (Eicon Diva Hisax ) card. If yes, please help me out. After configuring extension.conf and modem.conf I could

Hi, Anyone using ISDN4Linux (Eicon Diva Hisax ) card. If yes, please help me out. After configuring extension.conf and modem.conf I could make outward calls correctly from gnophone and kphone. Still the inward call to the configured MSN is correctly reaching Asterisk and also to the configured Context. But the issue is, it was hanging on 'Answer' application and throwing out

Hi all. I have 2 ip phones (Grandstream Budgetone): -budgetone1 -budgetone2 All two are connected to an Asterisk server. When I make a call from budgetone1 to budgetone2, I can speak with budgetone2 whith no problem. But when budgetone2 hangs up, budgetone1 does not play any tone (like busy tone). Budgetone1 seems to be still in conversation, but what conversation! Has anyone had a problem

*This message was transferred with a trial version of CommuniGate(tm) Pro* In setting up Asterisk, I'm looking to dump my current phone system (Nortel Venture). I presently have three POTS lines. I would use a VOIP provider, but now are presently available in the Toronto, ON, CANADA area that support user owned hardware/software. I need a 416/647 area code number. In looking at FXO cards

Hi all I've only been working with Asterisk for a matter of days but have already grown into a big fan =) Much as I've managed to get internal calling working fine, I have a configuration running on an old PII-233 on RH9 with a (although not badged as is a) Dynalink IS64PH/Winbond W6692 PCI Card as /dev/ttyI0. The card works fine in minitel and dials out without a problem.. However try

Hi, I am using Asterisk on a DSS1 ISDN-BRI with ISDN4Linux (and a Fritz Card PnP). The ISDN-BRI is in PTP-Mode (Point to Point "german: Anlagenanschluss") which is enabled within I4L with "hisaxctrl fcpcipnp0 7 1". Everything works fine except that I can not see the called number/MSN of incoming calls within Asterisk and because of this I can not route incoming calls

Hi all, my name is Hirofumi Tsujimura. We are porting and testing a PV-on-HVM in the IPF. This is a first time to send mail. I probably found the problem when I tested the VNIF. My operation for the test is following. 1. create a domain VTx and attach the VNIF in it. 2. create a domain U. 3. send a packet to the domain VTx from the domain U with ping command. Then, the domain VTx

Hello all, This afternoon I had a BRI line installed by Telstra (our telco in Australia). I'm using an Eicon Diva 2.02 PCI ISDN card with the isdn4linux driver. Incoming and outgoing calls with Asterisk work fine (and with no echo - my main reason for getting ISDN). However, I can't seem to get outgoing DTMF working (incoming works fine). I made a call from my desk phone (Cisco 7940G)

Well, it has been a long time since I used my NetJet S cards with asterisk (moved to the quad PRI card) but I am trying to get this working again for home use. Basically, what I am using is this: Linux 2.6.8.1: config lines: # ISDN subsystem CONFIG_ISDN=y # Old ISDN4Linux CONFIG_ISDN_I4L=y # CONFIG_ISDN_PPP is not set CONFIG_ISDN_AUDIO=y # CONFIG_ISDN_TTY_FAX is not set CONFIG_ISDN_DRV_HISAX=y

Hello, I just got my isdn-card working together with i4l and asterisk. Everything seems to be working fine: I can accept calls coming from the outside and I can dial out. Even setting the msn works like charm but my problem is that I cannot hear a word. There's complete silence in both directions. Any idea what could be the cause? Thanks for your help, Gunther Lspci: 0000:01:07.0 Network

I posted a message a little while ago but got no response (that I can recall), I've also seen other people mention this issue. Basically, when you have music on hold, it doesn't play the music on hold, the debug info shows it is starting and then stops straight away.. # My extensions.conf ... exten => s,1,Answer exten => s,2,DigitTimeout,5 exten => s,3,ResponseTimeout,10 exten

Hi to everyone! I am new to this list and i want to greet you all! I am trying to install Asterisk on a Fedora Core 3 Distribution with a Digi Datafire Micro V ISDN Card. I know that I have to use the ISDN4Linux so in modem.conf I set the I4l driver ,the msn and device. Modem.conf [interfaces] context=remote ;driver=aopen ; modem by AOpen driver=i4l ; isdn4linux - an

Hey All, I'm still (since April) having problems getting RxFax to work over an ISDN4Linux channel. Just wondering if anyone has had any luck getting it to work? I have done a CVS update today (about half hour ago) and made sure I have the latest version of spandsp according to Steve's website (spandsp-0.0.1k). When I was compiling asterisk, I got the following warnings:

From: Ben Skeggs <bskeggs at redhat.com> We've previously had identical naming between vertex and texture formats, so it mostly made sense to define these together. However, upcoming patches are going to transition the driver over to using updated texture header definitions using NVIDIA's naming, and this will no longer be the case. Signed-off-by: Ben Skeggs <bskeggs at

Dear all, I am quite new in this virtualization area. I am want to do some experiment with live migration using xen. However, I got problem since my server didn''t support VTx. I am using Ubuntu desktop 12.04 64 bit with Xen 4.1 Amd64. But when I reload the machine it wont start, since the XEN website its doesn''t matter using Paravirtualization without VTx support I dont know

Hello! Im pretty new of asterisk world: my goal would be using iaxcomm to call ppl over POTN. Yesterday i configured asterisk to be able to hear a song (with Playback() command) with iaxcomm, and it was wonderful. Now, today i tried to configure asterisk to use my ISDN4Linux supported card (a plain HFC card) with asterisk. i configured modem.conf this way, after reading

I'm trying to get a basic Asterisk configuration together for ISDN incoming / outgoing calls. I have two Cisco 7905g phones working (at least talking to each other) and have purchased a NETjet-S PCI ISDN card for routing calls to / from ISDN. The state I've managed to get it to is:- -- Executing Ringing("SIP/PHONE2-d557", "") in new stack -- Executing

Hello everybody, I have a strange comportment with oh323 and asterisk, I'start testing asterisk but with this I can't understant plesae help me ! Thanks Eltorio ---------------------------------------------------------- 1/PB: I can't dial from a H323 extensions (registered on a GNU GK) to a Modem[i4l] line ---------------------------------------------------------- Nothing happens

Currently we have problems with our asterisk server connect with an Eicon Diva 4BRI Card to a PBX. Asterisk is running in version 1.0.0 on RedHat Enterprise Linux 3AS with kernel 2.4.21-4.EL. The Diva server is running in version 7.5 Can someone help us in reolving the errors with incoming calls? When we try to call to an extension we get these messages in the CLI: -- creating pipe for

Hi all, Here another guy working with ztdummy and having problems with music. MP3Player does not work for me both from a telephone entering through a passive ISDN-adapter as well as a SIP-client in the LAN. Ztdummy works with conferences. Here are my messages. I have seen several discussion threads in the mail-archive regarding this subject, but could not find an answer. Is this something I