similar to: No luck using asterisk as proxy...

Hi Tony, Try adding "fromuser=xxxxx", maybe "username=xxxx" isn't enough... Just a guess, it already solved a few problems for me. -Manuel -----Messaggio originale----- Da: Tony Hoyle [mailto:tmh@nodomain.org] Inviato: martedì, 18. maggio 2004 13:03 A: asterisk-users@lists.digium.com Oggetto: [Asterisk-Users] Configure asterisk for outgoing.. need authuser parameter?

Hi, I have access to two providers. On one of them the authuser is the same as the username, so outgoing works. On the other one I can only get incoming - what ever combination I try for outgoing I get an error. The register command has the ability to specify both usernames (which is why incoming works) but outgoing doesn't seem to, and without that I'm stuck. They are defined as:

I have been a reseller & subscriber of pipecall since they started, however I am really struggling to get pipecall to work for outbound or inbound calls. I get errors that the registration has timed out. I have tried many variations of the register command register => 0845xxxxxxx@sipproxy.pipecall.com/1000 register => sipxxxxxxxxx:xxxxxxxxxx@sipproxy.pipecall.com/1000

I'm using Asterisk to registry several DDI's to a sip proxy (pipecall.com). Everything works fine apart from several times a day my firewall (zywall70) reports a UDP port scan attack from the pipecall sip proxy. I can't seem to work out why this should be. All I could think was that the sip registry was expiring and causing some strange probing from the proxy, is it possible to alter

Has anyone out there used the PipeMedia/PipeCall PSTN gateway? Anything good/bad to say about it? I'm considering using them for a new customer. They seem to have good rates, good provisioning tools and (better still) give commission on usage to dealers. -- David Gurr Congruity Ltd. Fax: 0871 661 1756 Hemel Hempstead UK

Package: logcheck-database Version: 1.2.68 Severity: normal I'm using ldap to authenticate users. And thus pam_unix is sufficient, but allowed to fail. It has now started to spam the logs with lots of Jan 2 09:22:57 sisko sshd[28511]: pam_unix(sshd:auth): authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=host92-22-static.38-79-b.business.telecomitalia.it user=root And on

There was some discussion on this list recently about the voiptalk silver service. I've just had an e-mail from them saying that the price has been reduced to 2.99 per month. However, they still only provide an 0870 number whereas pipecall provide a local call rate 0845 number in the fee. Chris

Any recommendations for a VoIP provider in the UK? I have a few guys in a field office in the UK with SIP phones and a VPN tunnel back to a working Asterisk setup in the US. The Asterisk setup has an IAX trunk with TelaSIP/VoipXpress with local DiD's for US offices, so they can call vendors, customers etc in the US at local rates. I'd like to get the same thing for the UK, so that UK

Hello. I'm trying to use Asterisk in combination with SER, to make the routing proccess to my PSTN-Gateways. I made a simple test defining some extension in my extension.conf, when i made a call my SER (SIP) Server forward the call to Asterisk, this proccess is ok, but when the call is answered i see an INVITE going out from Asterisk to my SER Server, this invite is then passed to my

I've been looking through the examples and docs, but haven't yet quite figured out how to do what I want. We've got a T1 coming in carrying a block of telephone numbers, terminating on an Asterisk box. Any call that comes in needs to get sent to a SIP proxy, with a particular extension format: *ANI*DNIS*@sipproxy.address The closest I can see to do this with the Dial() command is:

Hello list. My phone rings, I pick up, and the conversation is terminated. Every time. The setup : Grandstream GXP2010 --> SIPproxy (Endian Firewall) --> Asterisk Server --> ITSP Could it be the SIP proxy of my Endian firewall ?? I have 4 accounts on the Grandstream which listen on port 5060 --> 5063. They have a proxy defined namely my Endian firewall. On this SIPproxy I have a

Greetings folks; I have a bit of a conundrum, and I can't tell if Asterisk is doing something daft, or whether I'm clean missing out why it's doing what it's doing. So, I have a dialplan that looks a little like this: -------------------- [start] include => dids include => everythingelse [dids] ; Test exten => 8378,1,SetCallerID(3015551212) exten => 8378,2,Hangup

I think I have got * worked out as far as getting users on a small private network talking with each other, but when it comes to the bigger picture about talking between private networks connected by the Internet then I am getting confused about STUN, SER, SIPPROXY, RTPPROXY, etc. Before I start let me make it clear that I am not looking to drop out onto the public telco network anywhere, not at

------------------------ Dovecot Version: ------------------------ 2.0.13 ------------------------ Output of "dovecot -n": ------------------------ # 2.0.13: /usr/local/etc/dovecot/dovecot.conf # OS: Linux 2.6.35-28-generic x86_64 Ubuntu 10.10 ext4 mail_location = maildir:/home/%u/Maildir passdb { args = %s driver = pam } protocols = imap pop3 ssl = no userdb { driver = passwd }

Hello, I am using OpenSIPS to register all the users and planning to use asterisk for Auto Attendant, Queues, Voicemail and Conference Bridge. I have a scenario where the signaling does not happen properly: 1) A user from Opensips dials an extension 7000 which is an auto-attendant extension. The call is routed to asterisk to play the auto attendant messages like Welcome and Dial the

All, I am running into a situation in which one of my ext3 filesystems is getting hung during normal usage. There are three ext3 filesystems on a CompactFLASH. One is mounted as / and one as /tmp. In my test, I am copying a 100 MB file from /root to /tmp repeatedly. While doing this test, I eventually see the copying stop, and any attempts to access /tmp fail - if I even do ls /tmp the

Guys, I've downloaded AsteriskNOW few days ago so I'm new to this product. The first issue is on service provider area. I've already used a VoIP account already configured with my ISP, it works fine! This configuration has been used until now with the client SJphone, Now I would use this profile as main VoIP service provider to setup in AsteriskNOW. Here are the profile detail as

I have to register asterisk/sip with a sipproxy that does not support authentication, I do not know how to tell Asterisk not to send authentication request? # sip.conf [general] insecure=very permit=207.148.115.10/255.255.255.0 [myproxy] type=friend host=217.118.115.10 context=from-sip # Logging: <--- Reliably Transmitting (NAT) to 207.148.115.10:5060 ---> SIP/2.0 407 Proxy

Guys, please help me in understanding what I'm mistaking... Description: I've configured my AsteriskNOW (beta 6) server, in service providers section, with the parameters provided by my ITSP. Until now I've used this configuration with SJphone and all worked perfectly. Now I've decided to use this account with AsteriskNOW to begin my experience with a VoIP based PBX. The

hi i got TOS and retranssmission error on receiving SIP call chan_sip.c:2794 retrans_pkt: Maximum retries exceeded on transmission 10CAED68-0F1D-DF82-DA1E-A76C1CB3D8A3 at 172.18.100.72 for seqno 43156 (Critical Response) -- See doc/sip-retransmit.txt. [May 22 13:42:44] WARNING[18021]: chan_sip.c:2821 retrans_pkt: Hanging up call 10CAED68-0F1D-DF82-DA1E-A76C1CB3D8A3 at 172.18.100.72 - no reply to