Displaying 20 results from an estimated 9000 matches similar to: "chan_capi broken incoming audio"
2004 May 17
0
CAPI<->SIP broken incoming audio
>> Follow-up post to the one I sent last week regarding bad calls
between SIP
>> and ISDN.
>>
>> On Fri, 14 May 2004, Vic Cross wrote:
>>
>> > To me, it looks like a variation of the SIP RTP timestamp problem
(yes, my
>> > 7960 is at 6.3 code), but the problem exists on the ATA-186 too and
I
>> > don't have any other issues with that
2004 Jul 17
3
chan_capi: sending incoming calls to different contexts
Hello,
I am using chan_capi and would like * to behave differently depending
on the MSN the caller dials.
Is there a way to route incoming ISDN calls to different contexts based on
the MSN dailled?
I have tried something like
msn=1234
incomingmsn=1234
context=msn1
msn=4567
incomingmsn=4567
context=msn2
in capi.conf but with no results.
Thanks for any hints.
-Walter
--
Walter Doerr
2004 Dec 09
1
chan_capi question
Hi all,
I've finally taken the plunge and had isdn installed.
It's a BRI from Telewest in the UK.
I'm told by the provider that it's in point to multipoint mode with 6 digit
presentation.
I'm using an AVM fritz (bt speedway) with the fcpci-suse9.1-3.11-02 driver.
Chan_capi seems to be installed fine.
I can receive incoming calls. However, I can't call out.
When ever i
2005 Oct 08
2
No incoming calls from chan_capi 0.6
Hello,
I'm trying to use the version 0.6 of chan_capi-cm for outgoing calls it
works perfectly but for incoming calls it doesn't work.
I tried to set an extension to dial my from-pstn context and it works.
So I think there's a problem with my capi.conf or something...
Here's a debug when calling
-- CONNECT_IND
(PLCI=0x101,DID=9100,CID=46720XXXX,CIP=0x4,CONTROLLER=0x1)
2005 Jan 06
0
chan_capi compile problem
Hi all,
I?m using * with a Suse 8.1 (kernel 2.4.19-4GB). My hardware are a Eicon
Diva 2.01 PCI and a Eicon Diva Server 4BRI; I have installed the drivers
wich came with the distribution using the distro installer (yast2). I?m
experiencing problems with outgoing calls so I?ll try with chan_capi instead
of chan_modem.
The point is that I?m having problems with the compilation:
2004 Dec 27
0
[chan_capi] can't get it compiled
OS: Redhat 9.0
Kernel: 2.4.20-8
Asterisk: latest CVS head
Hi all,
I try to compile the latest chan_capi, but it won't work. I also tried
the patch that is arround there from frank sautter and I have
installed the asterisk header files.
Asterisk is working very good :) and the Fritz AVM pc Card is running.
capiinit:
1 fcpci running fritz-pci A1 3.11-02 0xbc00 5
lsmod:
fcpci
2004 Sep 20
1
can't compile chan_capi 0.3.5 under SuSE 9.0
Hi there,
the subject says it all...
I get the following error messages:
----
mmielke@pbx:~/chan_capi-0.3.5> make
gcc -pipe -Wall -Wmissing-prototypes -Wmissing-declarations -g
-I/usr/include -D_REENTRANT -D_GNU_SOURCE -O6 -march=i686 -DCAPI_ES
-DCAPI_GAIN -DCAPI_SYNC -DUNSTABLE_CVS -Wno-missing-prototypes
-Wno-missing-declarations -DCRYPTO -c -o chan_capi.o chan_capi.c
2004 Jul 18
1
chan_capi won't compile
I am trying to compile chan_capi 3.3.4a, but I end up with lots of
gibberish. Near the top it states that capi20.h doesn't exist. Searching
for the file, several show up:
# find / -name capi20.h -print
/usr/src/linux-2.4.21-144/include/config/isdn/capi/capi20.h
/usr/src/linux-2.4.21-231-include/smp/include/config/isdn/capi/capi20.h
2007 Jan 25
1
Failing to compile chan_capi
I've got a brand new Eicon Diva Server BRI card and I want to configure
it with Asterisk. I managed to get asterisk and zaptel to compile and
install, I've compiled and installed the drivers for the Diva card and
now I need to compile and install the chan_driver for chan_capi.
Unfortunately this fails miserably. I get the following messages:
I'm using: Kernel 2.6.16.37.4,
2005 Aug 24
2
chan_capi on slackware10? cannot compile :-( why?
I'm trying to compile chan_capi-0.5.4 on Slackware 10, but I have bunch
of errors.
(By the way, can I use chan_capi for ISDN card with winbond w6692cf
chipset?)
I'm not a linux expert, still :-)
Before compiling, when I type "modprobe capi" to load capi module, and
then "lsmod", i get list of modules:
capi 6208 0
kernelcapi 30496 1
2005 Sep 30
0
R: chan_capi-0.3.5
Thanks Jorg,
it's worked, but what modules i need to use it with asterisk?
I insert load => chan_capi.so in /etc/asterisk/modules.conf and chan_capi.so=yes under [globals] section.
When asterisk start, I get this error:
== Parsing '/etc/asterisk/modules.conf': Found
[chan_capi.so] => (Common ISDN API for Asterisk)
== Parsing '/etc/asterisk/capi.conf':
2005 Mar 04
1
chan_capi with patch compilation error
Hi,
I'm trying to make work chan_capi with last asterisk CVS.
I installed last zaptel,libpri,last cvs ana patched chan_capi 0.35 with the
patch kindly suggested me by Jason Williams:
http://www.levigo.de/VoIP/chan_capi-0.3.5-cvs-HEAD-patch.tar.bz2
First I received error 127 that I resolved commenting the line CC=gcc-2.95
but now I have this error:
chan_capi.c: In function `load_module':
2004 Aug 16
3
Problems compiling chan_capi-0.3.5
Hello,
I already searched on the mailing list, but I didn't found a solution to my
problem. I can't install chan_capi anymore. It has been running very well
but then I run into trouble. so I decided to update to the latest CVS
version of asterisk and of chan_capi. But now I can't compile chan_capi
anymore.
I'm running SuSE 9.0 and I think the problem is caused by an update that
2003 Apr 22
1
struggling with Diva 4BRI and chan_capi
Hi,
I am trying to configure a Diva Server 4BRI to work with chan_capi. Here
are the steps that I took:
- compiled fresh kernel with new-style CAPI support: i4l_divas_1.2
- got the divactrl_1.2 utilities, configured the card startup scripts,
- rebooted, card firmware loaded properly, "capiinfo" displays detailed
info on 4 controllers, however there is an error message:
FAC REQ -
2004 Jun 14
1
Chan_Capi 0.3.4
Just tried compiling chan_capi 0.3.4 under CVS Head and get the following
errors.
chan_capi.c:60:
`__use_AST_MUTEX_DEFINE_STATIC_rather_than_AST_MUTEX_INITIALIZER__'
undeclared here (not in a function)
chan_capi.c:61:
`__use_AST_MUTEX_DEFINE_STATIC_rather_than_AST_MUTEX_INITIALIZER__'
undeclared here (not in a function)
chan_capi.c:62:
2004 Dec 07
1
chan_capi 0.3.5 does not compile
I use stable CVS asterisk and it is working without problems.
But now i am trying to compile chan_capi 0.3.5 module and i get following error
/usr/src/chan_capi-0.3.5# make
gcc -pipe -Wall -Wmissing-prototypes -Wmissing-declarations -g -I/usr/include -D_REENTRANT -D_GNU_SOURCE -O6 -march=i686 -DCAPI_ES -DCAPI_GAIN -DCAPI_SYNC -Wno-missing-prototypes -Wno-missing-declarations -DCRYPTO -c -o
2005 Jan 12
4
chan_capi-0.3.5 error 127
Hi,
I have a problem for install chan_capi
My pc: Suse 9.1, with asterisk current stable en cvs
I have download
http://www.junghanns.net/asterisk/downloads/chan_capi.0.3.5.tar.gz
And the path from
http://www.levigo.de/VoIP/chan_capi-0.3.5-cvs-HEAD-patch.tar.bz2
And patch the chan_capi
# cd chan_capi-0.3.5
# patch -p1 < chan_capi-0.3.5-patch.diff
# make /for install
My error
2004 Apr 12
1
Trouble compiling chan_capi on Suse 9.0
Hi,
I am trying to install chan_capi, with asterisk (cvs) on Suse 9.0, but I
get the following error:
======
linux:/usr/src/chan_capi-0.3.1 # make
gcc -pipe -Wall -Wmissing-prototypes -Wmissing-declarations -g
-I/usr/include/asterisk -D_REENTRANT
-D_GNU_SOURCE -O6 -march=i686 -DCAPI_ES -DCAPI_GAIN
-DDEFLECT_ON_CIRCUITBUSY -DCAPI_SYNC
-Wno-missing-prototypes -Wno-missing-declarations -DCRYPTO
2004 Jul 14
2
Chan_Capi 0.3.4a error
I just downloaded chan_capi.0.3.4a.tar.gz but it will not compile on my
system (Suse 9.1).
I compiled and installed Asterisk and it is running, did I miss a
configuration or dependency for Chan_Capi somewhere ?
cheers,
Mike
linux:/usr/src/chan_capi-0.3.4a # make
gcc -pipe -Wall -Wmissing-prototypes -Wmissing-declarations -g
-I/usr/include -D_REENTRANT -D_GNU_SOURCE -O6 -march=i686 -DCAPI_ES
2004 Sep 27
3
chan_capi, Eicon Diva server BRI, kernel 2.6?
Hi list,
Does chan_capi work with kernel 2.6? The Eicon Diva server card loads
fine judging from /var/log/messages but Asterisk gives an error when
trying to load the chan_capi module. I'm using chan_capi-0.3.5,
zaptel-1.0.0, libpri-1.0.0 and asterisk-1.0.0 on a Fedora box with
kernel 2.6.8-1.584. Zaptel and ilbpri work fine as does *. I have seen a
msg that may be related and don't know